Case JXU75 JXU85 JXU95 JXU105 JXU115 Tractors PDF Operator’s Manual
[2010-2014]To service and quality use the tractors Case, you need to use professional information, which in this operator's manual. In this manual you will see information about the next model's tractors:
JXU75
JXU85
JXU95
JXU105
JXU115
In this manual you will find detailed service information, operating instructions, and maintenance, special instructions for repair and maintenance, service documentation, and any additional information that presented specifically for tractors Case. Also, this manual will be your assistant during maintenance and repair and will help to identify and eliminate problems and inaccuracies.
Case manual is presented in PDF format. The manual has a nice and friendly interface, in English. With PDF format you to find the necessary information and print out individual pages or the entire text as a whole. We recommend using Adobe PDF Reader, to be sure all images/graphics will display correctly.
Contents:
- 1 GENERAL INFORMATION
- Note to the Owner
- Declaration of conformity
- Commission directive 2010/52/EU
- Noise level
- Electro-magnetic interference (EMC)
- International symbols
- Introduction
- Tractor intended use
- Ecology and the Environment
- Identification plates
- Approval data plate
- Component Identification
- 2 SAFETY INFORMATION
- Safety rules
- Safety information
- Air conditioning safety regulations
- Vehicle vibration levels
- Cab guard
- Roll over protective structure (ROPS)
- Machine stability
- Personal protective equipment (PPE)
- Tractor jacking points
- Hazardous chemicals
- Burn prevention
- Fire or explosion prevention
- Getting in and out of the machine
- Emergency exit
- Safety signs
- 3 CONTROLS AND INSTRUMENTS
- ACCESS TO OPERATOR'S PLATFORM
- OPERATOR'S SEAT
- FORWARD CONTROLS
- RIGHT-HAND SIDE CONTROLS
- REARWARD CONTROLS
- EXTERIOR CONTROLS
- DISPLAY SETTINGS
- TRANSMISSION
- 4 OPERATING INSTRUCTIONS
- COMMISSIONING THE UNIT
- STARTING THE UNIT
- STOPPING THE UNIT
- 5 TRANSPORT OPERATIONS
- RECOVERY TRANSPORT
- 6 WORKING OPERATIONS
- 2WD or 4WD
- DIFFERENTIAL LOCK
- REMOTE VALVES
- POWER TAKE OFF (PTO)
- HYDRAULIC LIFT
- THREE-POINT LINKAGE
- TOWBAR
- REAR TOW HITCH
- MAXIMUM PERMITTED LOADS
- WHEELS AND TIRES
- WHEEL TRACK ADJUSTMENT
- BALLAST
- 7 MAINTENANCE
- GENERAL INFORMATION
- MAINTENANCE CHART
- As required
- At warning message display
- Every 10 hours or daily
- Every 50 hours
- Every 100 hours
- Every 300 hours
- Every 600 hours
- Every 1200 hours or annually
- Every 1200 hours or two years
- 1800 hours Service
- EVERY 3600 HOURS OR EVERY 4 YEARS
- STORAGE
- General Maintenance
- FLUIDS AND LUBRICANTS
- 8 TROUBLESHOOTING
- FAULT CODE RESOLUTION
- ALARM(S)
- 9 SPECIFICATIONS
- Technical data
- 10 ACCESSORIES
- Joystick for control valves
- Front-end loader
Screenshots for Case JXU75 JXU85 JXU95 JXU105 JXU115 Tractors PDF Operator’s Manual:
Our company provides for sale original spare part catalogs, workshop manuals, diagnostic software for all models of engines, cars, trucks, buses, forklifts, tractors, harvesters, cranes, buldozers, generators, construction and agricultural machines, motorcycles. To purchase a catalog online, please add the product to your cart, fill in the contact form online. Our managers proceed your order the same day.
Related products for Case JXU75 JXU85 JXU95 JXU105 JXU115 Tractors PDF Operator’s Manual:
New Holland Electronic Service Tool CNH EST 9.14 [2026] Engineering Diagnostic Software
The dealer software Electronic Service Tools CNH EST 9.14 update 1 (ex v9.3, v9.4, v9.5, 9.6, 9.7) with the highest engineering access Level available for download or shipping worldwide with online support!
250$
[04/2026]
|
CNH Display Codes for the Paid Features 2023 v1.1
The app generates codes for CNH displays to unlock paid features. Codes are entered through the display
3999$
[2024]
|
CNH Approval Password Generator 2023 NBV2
CNH (Case/New Holland) Generate approval passwords for Blank ECU, ECU Reassignment, and Download Crash Recovery; Supported ECU types: EDCMS62, EDC7, CNHEDC7UC31, EDC16C39.
1199$
[11/2024]
|
CNH Firmware Decrypt Encrypt Tool (FEDT) v2022.22
CNH Firmware Encrypt & Decrypt tool 2022.22 is Windows desktop software that supports decryption and encryption for *.enc and *.cre files from CNH.
999$
[12/2023]
|





