Case 580F Construction King Loader Backhoe Operator’s Manual PDF

The Case 580F Construction King Loader Backhoe Operator’s Manual PDF covers the operation, controls, specifications, and routine maintenance of the Case 580F backhoe loader. It provides practical instructions for starting and stopping the engine, operating the loader and backhoe, using different control configurations, and preparing the machine for transport.

The manual is intended to help operators understand the machine’s operating procedures and maintenance requirements. Follow the manufacturer’s safety instructions and recommendations when operating or servicing the equipment.

Operating Instructions and Machine Controls

The manual explains the instrument cluster, machine controls, power shuttle and mechanical shuttle models, operator’s seat, parking brake, differential lock, and cab controls. It covers engine starting procedures, cold-start aids, engine warm-up, idle speed, gear selection, and operating the machine in hot and cold weather conditions.

The loader section describes bucket lifting and lowering, rollback and dumping operations, clam bucket functions, Return-To-Dig operation, bucket level indicators, and 4-in-1 bucket controls. The backhoe section covers sideshift and axial backhoe configurations, foot swing and dual-lever controls, Extendahoe operation, boom lockout systems, transport positioning, and backhoe installation and removal procedures.

Maintenance and Lubrication

The manual includes machine specifications, engine information, cooling and electrical systems, hydraulic components, transmission, transaxle, final drives, power steering, brakes, wheels, and tires. It provides recommended fuels, fluids, lubricants, maintenance schedules, grease fitting locations, and routine service instructions.

Additional topics include engine oil and filter replacement, air cleaning system maintenance, cooling system service, fuel system inspection, battery and alternator maintenance, hydraulic system care, fan belt adjustment, and loader adjustments. The manual also covers Return-To-Dig and anti-rollback adjustments, bucket teeth maintenance, machine storage, and procedures for returning the equipment to service after storage.

TABLE OF CONTENTS

Safety
Safety Rules
Before you Start the Machine
Operation
Service
Introduction
Serial Number Location
Specifications
Engine
Cooling System
Electrical System
Hydraulic System
Capacities
Travel Speeds
Tires
Operating Weights
Loader
Sideshift Backhoe
Axial Backhoe
Buckets
Instruments and Controls
Instrument Cluster
Machine Controls
Power Shuttle Models
Mechanical Shuttle Models
Seat, Parking Brake and Differential
Lock Controls
Cab Controls
Engine Operation
The First Period of Operation
Starting Procedure
To Warm the Engine
The ‘Idle Speed’
Stopping
Starting Aids
Cold Start Wing Nut
Thermostart
Booster Batteries
Battery Heater
To Operate the Machine
Operator’s Seat
Gear Selection
To Drive the Machine
To Put the Machine on a Trailer
To Operate in Hot Temperature
To Operate in Cold Temperature
Operating Instructions
Operating Instructions for Loader
To Lift and Lower the Bucket
To ‘Roll-Back’ or Dump the Bucket
To Open or Close the Bucket Clam
Return-To-Dig
Bucket Level Indicator
Indicator for 4-in-1 Bucket
Position
Indicator for 4-in-1 Bucket Clam
Instructions to Operate the Backhoe
Sideshift Backhoe with Foot Swing
Sideshift Backhoe with Dual Levers
Axial Backhoe with Foot Swing
Axial Backhoe with Dual Levers
Sideshift Backhoe with Extendahoe and Foot Swing
Sideshift Backhoe with Extendahoe and Dual Levers
Axial Backhoe with Extendahoe and Foot Swing
Axial Backhoe with Extendahoe and Dual Levers
Boom Lockout System
Sideshift Locking Valve
‘Transport’ Position for Backhoe
To Move the Backhoe to the Right Hand or Left Hand Side
To Remove the Backhoe
To Install the Backhoe on the Machine
Operating Tips
Operating Tips
Information for Operating Loader
Instructions for Operation of the Backhoe
Fuels and Lubricants
Fuel, Fluids and Lubricants Chart
Maintenance and Lubrication
Introduction
Maintenance Chart for the First Time Period of Operation
Scheduled Maintenance Chart
Grease Fittings
Engine Oil and Filter
Air Cleaning System
‘Engine Cooling System’
Fuel System
‘Electric System’
Lights
Alternator
Battery
Booster Batteries
Hydraulic System
Transmission for the ‘Power Shuttle’
Transaxle
Final Drives
Power Steering System
Wheels and Tires
Brakes
To Adjust the Fan Belt
Loader Adjustment
Return-To-Dig
Anti-Rollback Adjustment
Bucket Teeth
Storage of the Machine
To Put the Machine into Service Again

Delivery (Instant Download)

After payment, the PDF manual is sent to the email address provided with your order, usually within 1–10 minutes. Please ensure your email address is correct during checkout.

Printing and Support

The PDF format allows you to print the pages you need for maintenance, operation, or workshop reference. Keep the relevant instructions available when working with your equipment.

For questions about the manual or assistance with your order, please contact our support team.