Case CX14 Mini-Excavator Operators Manual PDF
[2003]This operator's manual covers the Case CX14 mini-excavator. It provides instructions for safe machine operation, explains the functions of the machine's controls and components, and includes operating procedures, maintenance guidelines, technical specifications and troubleshooting information.
The manual is intended for machine operators and provides guidance on daily inspections, correct operating practices and routine maintenance. Follow the manufacturer's instructions and observe all safety precautions when operating or servicing the equipment.
Operation and Maintenance Coverage
The manual covers general safety requirements, pre-start inspections, warning labels, operator controls, monitor panel indicators, switches, levers and pedals. It explains engine starting and stopping procedures, warm-up requirements, machine travel, digging, loading, slewing and parking.
Additional sections describe operating techniques for narrow spaces, working on slopes and soft ground, changing crawler frame width, and using the machine in adverse weather conditions. Emergency procedures and precautions for long-term machine storage are also included.
The maintenance section provides lubricant, fuel and coolant specifications, hydraulic system servicing procedures, fuel system bleeding, crawler shoe replacement and adjustment, and inspection schedules. It covers daily and weekly maintenance tasks, lubrication points, electrical system checks, bucket servicing and replacement of worn components.
The manual also includes transportation instructions for loading, unloading, securing and lifting the machine, together with machine dimensions, attachment working ranges, engine and hydraulic specifications, performance data and component weights.
The troubleshooting section addresses common problems involving machine operation, travel, hydraulic systems, the gauge cluster and engine. Additional coverage includes hydraulic breaker and nibbler operation, attachment installation, safety precautions, maintenance intervals and EPA engine emissions requirements.
Part Number: 6-37900NA
Table of Contents:
SECTION 1
SAFETY PRECAUTIONS
TABLE OF CONTENTS
GENERAL SAFETY INFORMATION
SAFETY PRECAUTIONS
PRE-START SAFETY
SAFETY DURING OPERATION
INSPECTION & MAINTENANCE SAFETY
BATTERY SAFETY
WARNING LABELS & DECALS
PROHIBITED MACHINE OPERATION
END OF WORK SHIFT SAFETY
PRECAUTIONS FOR TRANSPORTATION
TOWING THE MACHINE
SECTION 2
MACHINE FAMILIARIZATION
TABLE OF CONTENTS
FAMILIARIZATION
GENERAL MACHINE NOMENCLATURE
OPERATOR CAB NOMENCLATURE
COMPONENT & CONTROLS NOMENCLATURE
Monitor Panel (Gauge Cluster)
Meters
Coolant Temperature Meter
Fuel Meter
Hourmeter
WARNING LAMPS
Battery Charge Lamp (Red)
Engine Oil Pressure Lamp (Red)
Coolant Temperature Lamp (Red)
Low Fuel Warning Lamp (Red)
Indicator Lamps
High (2nd) Travel Speed Lamp (Yellow)
Switches
Starter Switch
Travel Speed Select Switch
Horn Switch
Levers and Pedals
Safety Lock Lever
Operating Levers (ISO Operating Pattern)
Travel Control Levers
Throttle Lever
Adjustable Crawler Frame Width/Dozer Operating Lever
Swing Lock Lever
Boom Swing Operating Pedal
Nibbler & Breaker Operating Pedal
Guard with Locking Device & Covers
Seat Front to Back Adjustment
Electrical Equipment
Working Light Switch
Fuse Box (Main)
STORAGE & OTHERS
Storing Place for Manual
Tools
Grease Gun
SEAT BELT
SECTION 3
BASIC MACHINE OPERATION
TABLE OF CONTENTS
PRE-START CHECK
Daily Inspection of Machine
Inspection Before Operation
Confirmation Before Starting Machine Engine
STARTING AND STOPPING MACHINE ENGINE
Start-up Under Normal Conditions
Start-up Under Cold Conditions
Start-up with Booster Cables
Connecting/Disconnecting Booster Cables
STOPPING MACHINE ENGINE
INSPECTION AFTER STARTING MACHINE ENGINE
Exhaust Gas Color, Abnormal Sound & Smell
Check Each Switch & Lever
Check Monitor Panel (gauge Cluster)
WARMING UP ENGINE
Engine Warm Up
Warming Up Hydraulic Oil
MACHINE OPERATION
Machine Travel
Stop Traveling
Travel Precautions
Care On Up/Down Slope
Machine Operation in Water/On Soft Ground
Getting Out of Soft Ground
Slewing Operation
Changing Machine Width (Crawler Frame Width)
PRACTICES TO IMPROVE EFFICIENCY
Digging
Loading
Works In Narrow Space
Minimum Slewing Position
MACHINE PARKING
CHECK & CONFIRMATION AFTER WORK
PRECAUTIONS AFTER OPERATION
MEASURES AFTER EMERGENCY STOP
LOCKING UP WITH KEY
EMERGENCY MEASURES AGAINST SUDDEN FAILURE OF MACHINE
Releasing Lock for Travel Motor
Blowing Bucket
Lowering Arm & Boom
Slewing Upper Swing Structure
CAUTION ON USING RUBBER CRAWLER SHOES
Proper Usage
Prohibited Work
Caution On Usage
MACHINE OPERATION IN ADVERSE WEATHER CONDITIONS
Operation In Extreme Cold
Operation At Seashore or Salty Climate
Care for Electrical Equipment
Operation In Dusty Areas
PRECAUTIONS WHEN STORING THE MACHINE FOR A LONG TIME
SECTION 4
MAINTENANCE
TABLE OF CONTENTS
GENERAL INFORMATION
GENERAL SAFETY & PRECAUTIONS
LUBRICANT, FUEL & COOLANT SPECIFICATIONS
FILTERS & ELEMENTS, AND BUCKET
ACCESSORY TOOLS
TORQUE SPECIFICATIONS FOR CAPSCREWS & NUTS
TORQUE SPECIFICATIONS FOR JOINTS & HYDRAULIC HOSES
INSTALLING HYDRAULIC HOSE AND PIPE JOINT
RELEASING INTERNAL PRESSURE OF HYDRAULIC OIL SYSTEM
PRESSURIZING HYDRAULIC OIL TANK
BLEEDING AIR IN FUEL SYSTEM
REPLACEMENT OF RUBBER CRAWLER SHOE
Removing Rubber Crawler Shoe
Installing Rubber Crawler Shoe
Check and Adjustment of Tension On Crawler Shoe
INSPECTION AND MAINTENANCE CHART
WHEN REQUIRED
Cleaning Radiator Cores
Cleaning or Replacement of Radiator Cap
Replacement of Working Light
Reconditioning Bucket
Check for Abrasion/Damages On Tooth Point & Side Cutter
Replacing Tooth Points
Replacing Side Cutter
Replacement of Bucket
Removal of Bucket
Installing Bucket
Adjusting Bucket Mount Gap
Inspecting Rubber Crawler Shoe
Lubrication For Operating Levers
Checking Electrical Wiring and Fuses
8-HOUR (DAILY) INSPECTION AND MAINTENANCE
Check External Conditions of Machine
Check Capscrews and Nuts For Looseness and/or Missing
Check Each Cylinder, Piping and Hose For Leakage and Damages
Check Travel System For Leakage and Abrasion
50-HOUR (WEEKLY) INSPECTION AND MAINTENANCE
Adjusting Crawler Tension
Greasing Pins Around Bucket
Draining Water from Water Separator and Cleaning
Draining Water and Deposits from Fuel Tank
Check Battery Fluid Level and Specific Gravity
SECTION 5
TRANSPORTATION
TABLE OF CONTENTS
TRANSPORTATION
When Preparing Transportation Plans
Loading And Unloading the Machine
Securing the Machine
Lifting Procedures For the Machine Complete
SECTION 6
SPECIFICATIONS
GENERAL SPECIFICATIONS
Machine Dimensions
Attachment Working Ranges
Boom With Arm Cylinder
Arm & Standard Bucket
Arm
Bucket
Dozer
Crawler Shoe
Bucket Types
Performance Specifications
Speed and Gradeability
Side Digging & Dozer
Engine
Hydraulic Components
Noise Level
Machine & Components Weight
SECTION 7
TROUBLESHOOTING
GENERAL TROUBLESHOOTING
Operating
Travel
Hydraulic
Gauge Cluster Display
Engine
SECTION 8
OPTIONAL EQUIPMENT
8.1 OPERATION OF HYDRAULIC BREAKER AND NIBBLER
Selection of Hydraulic Breaker And Nibbler
Before Operating Breaker and Nibbler
Precautions For Impurity and Hydraulic Oil
Operation
Connection To Hydraulic Circuit For Attachment
Selector Valve Shifting Procedures
8.2 SAFETY PRECAUTIONS
Use for Intended Purpose
Passengers
Protective Equipment
Cylinders
Avoid Continuous Operation
Hose Surge
Do Not Use Dropping Force
Do Not Use Slew / Swing Force
Do Not Lift
Working Ranges
To Pry and Break Forcibly
Arm in Vertical Position
8.3 PERIODIC INSPECTION AND MAINTENANCE INTERVAL
Replacement Interval
Maintenance Record Sheet (Example)
Pump Discharge Capacity (For Reference)
SECTION 9
SPECIFICATIONS (EPA ENGINE)
TABLE OF CONTENTS
THE EPA REGULATIONS
Engine Identification
Requirements on Engine Installation Condition
Emissions-Related Parts
Maintenance Schedule
Emission System Warranty Statement
Delivery (Instant Download)
Upon successful payment, the PDF manual will be sent to the email address specified during checkout, generally within 1–10 minutes. Please carefully check your email address before submitting your order.
Printing and Support
The entire PDF can be printed. You can print the relevant pages and instructions you need and have them nearby while carrying out service work on your equipment.
For assistance with the manual or your purchase, contact our support team. Our after-sales service is available to answer your questions.
Screenshots for Case CX14 Mini-Excavator Operators Manual PDF:
Our company provides for sale original spare part catalogs, workshop manuals, diagnostic software for all models of engines, cars, trucks, buses, forklifts, tractors, harvesters, cranes, buldozers, generators, construction and agricultural machines, motorcycles. To purchase a catalog online, please add the product to your cart, fill in the contact form online. Our managers proceed your order the same day.
Related products for Case CX14 Mini-Excavator Operators Manual PDF:
![]() eTimGo AGCE for CNH EST 2026 all brands OFFLINE
eTimGo AGCE for CNH EST 09/2026 all brands OFFLINE. Manuals, electrical bulletin diagrams, and diagnostic procedures are provided, including some spare parts catalogs.
1200$
[09/2026]
|
New Holland Electronic Service Tool CNH EST 9.15 [2026] Engineering Diagnostic Software
The dealer software Electronic Service Tools CNH EST 9.15 update 1 (ex v9.3, v9.4, v9.5, 9.6, 9.7) with the highest engineering access Level available for download or shipping worldwide with online support!
250$
[11/2026]
|
Original CNH DPA5 Diagnostic Service Tool Adapter Cable Kit + CNH EST 9.12
The Case, New Holland (CNH) DPA5 adapter kit includes all the cables. This is a genuine CNH DPA5 kit. Include CNH 9.12 Engineering Software 2025
1699$
[2025]
|
CNH Display Codes for the Paid Features 2023 v1.1
The app generates codes for CNH displays to unlock paid features. Codes are entered through the display
3999$
[2024]
|





