Tigercat Lantec Skidder Winch Model 40 Operation & Maintenance Manual PDF

This PDF Operation & Maintenance Manual includes technical information, special instructions for repair, technical specifications, detailed pictures, and diagrams, troubleshooting, and other additional information for the Tigercat Lantec Skidder Winch Model 40.

This Lantec guide helps easily and accurately perform disassembly, maintenance, wheel excavators, troubleshooting, and breakage.

For your convenience, we present you with a link 'Tigercat pdf manual instant preview' on the top of this page. This link will help you to preview this PDF manual and understand whether this manual contains needed for your service information or not.

This technical handbook comes in PDF format. So, it doesn't require any installation (Instant Download). We recommend you use the application Adobe Acrobat Reader for working with PDF instructions. Also, we recommend you print this manual and use it as a handbook when it will be necessary.

Models covered:
Skidder Winch Model 40

ASSEMBLY #: 404390/404414
INSTALLATION #: 404070/404100
PART NUMBER 18243A

CONTENTS:
1. INTRODUCTION
1.1. WINCH SPECIFICATIONS
2. OPERATION OF THE WINCH
2.1. WINCH OPERATION
3. WINCH DESCRIPTION
4. INSTALLATION
5. RECOMMENDED GEAR OIL
6. STORAGE
6.1. STORAGE: LONG-TERM OR OUTDOORS
6.2. PREPARATION AFTER STORAGE
7. START-UP PROCEDURE
7.1. CABLE FERRULE INSTALLATION
SERVICE AND GENERAL MAINTENANCE
8.1. BLEEDING OF BRAKE SYSTEM
8.2. LUBRICATION SCHEDULE
8.3. MAINTENANCE SCHEDULE
9. PRESSURES
10. HYDRAULIC REQUIREMENT
10.1. HYDRAULIC SYSTEMS
10.2. LINE SIZES
11. DISASSEMBLY / ASSEMBLY
11.1. GENERAL PROCEDURE BEFORE STARTING
11.2. DISASSEMBLY
11.3. ASSEMBLY
12. TROUBLESHOOTING
12.1. WINCH WILL NOT PULL IN THE LOAD. WINCH OPERATION IS SLOW OR UNEVEN
12.2. BRAKE WILL NOT HOLD WHEN THE CONTROL VALVE IS RETURNED TO NEUTRAL AFTER PULLING OR LIFTING A LOAD
12.3. WINCH WILL NOT OPERATE IN THE FREESPOOL POSITION