Tigercat Feller Buncher 860C, 870C, L870C Operator’s Manual PDF

Note: You may also be interested in the following PDF manual for Tigercat Feller Bunchers 860C, 870C, and L870C:
Service Manual

The PDF Operator's Manual will assist the operator with the techniques of proper and safe operation of the 860C/870C/L870C Feller Bunchers.

This manual also covers important service information regarding the safe operation of the saw head. The manual contains care and safety procedures and a preventive maintenance schedule to ensure optimum machine performance.

The operator's manual is organized to guide a service technician through the logical steps of identifying and correcting problems related to the feller bunchers.

The manual is presented in PDF format, which greatly simplifies its use since it does not require installation (INSTANT DOWNLOAD). To work with the PDF manual, we recommend that you use the Adobe PDF Reader application.

At the top of the page, you can see the link 'Tigercat pdf manual instant preview'. By clicking on it, you can see what this manual is all about, and what quality of the pictures and drawings are in it. You can also read the list of content that is presented below.

If you have any questions or problems with downloading the file, you can write to us and we will help you.

Serial Numbers:
860C 86012601 TO 86013500
870C 87012601 TO 87013500
L870C 87022601 TO 87023500

Models covered:
860C,
870C,
L870C.

CONTENTS:

• INTRODUCTION
• STANDARDS ROPS, TOPS, FOPS, OPS
• NON-APPROVED FIELD PRODUCT CHANGES
• SECTION 1 - SAFETY
  • BACKOVER ACCIDENTS - AVOIDING
  • BATTERY DISCONNECT SWITCH
  • BATTERY SAFETY
  • CAB EXITS
  • COOLING SYSTEM
  • EMERGENCY CAB EXITS
  • ENGINE DOORS
  • ER BOOM FUNCTION - SWITCHABLE
  • ER BOOM SYSTEM PRECAUTIONS
  • EXHAUST FUMES
  • FELLING TREES
  • FIRE PREVENTION
  • FLUID INJECTION INJURY
  • FLUID LEAKS
  • GREASE INJECTION INJURY
  • HAZARD ZONE
  • HYDRAULIC PRESSURE HAZARD 
  • INTERLOCK SWITCH
  • LIGHTNING SAFETY AWARENESS
  • LIQUID STARTING AID
  • LOOSE CLOTHING HAZARD
  • MACHINE STABILITY AND TRACTION
  • NOISE LEVEL INSIDE THE CAB
  • PARKING HAZARDS
  • PARKING THE MACHINE
  • PROTECTIVE CLOTHING
  • REFUELING
  • SAFETY HAZARDS - OPERATING
  • SAFETY HAZARDS - VITON SEALS
  • SAFETY INTERLOCK SWITCHES ON CAB DOORS
  • SAFETY LABELS
  • SAFETY PRECAUTIONS, GENERAL
  • SAFETY PRECAUTIONS, OPERATION
  • SAFETY PRECAUTIONS, SERVICING
  • SAFETY SYMBOLS
  • SIGNAL WORDS
  • VIBRATION AND NOISE LEVELS INSIDE THE CAB
  • VITON SEALS
  • WELDING, PRIOR TO
  • WORKING WITH OIL
• APPENDIX - USING HIGH-SPEED DISC SAWS SAFELY
  • COMMENTS AND INSTRUCTIONS
  • DANGERS
  • FORWARD
  • HIGH ANGLE WRIST ROTATION CAPABILITY
  • SAW HEAD DON'TS
  • TYPE OF HOUSING MAKES A DIFFERENCE
• SECTION 2 - CONTROLS & OPERATION
  • ACCUMULATION MODE FEATURE
  • ACCUMULATION MODE FEATURE DESCRIPTION
  • ADJUSTMENT PROCEDURE
  • AIR CONDITIONER/HEATER CONTROLS
  • AIR FILTERS
  • AIR INTAKE SYSTEM, ENGINE - 8***2601 TO 8***2632
  • AIR INTAKE SYSTEM, ENGINE - 8***2633 TO 8***3500
  • AM/FM STEREO CD
  • ANTI-STALL - SWITCH WITH LIGHT
  • AUXILIARY POWER OUTLET
  • BATTERY BOOSTER JUMPER PLUG
  • BATTERY DISCONNECT SWITCH
  • BOOM CONTROLS
  • BOTTOM FUELING SYSTEM
  • CARE OF THE MACHINE
  • CASE DRAIN STRAINERS
  • CIGARETTE LIGHTER
  • CLAMP ARMS CONTROL, JOYSTICK
  • CLEANING
  • COLD WEATHER STARTING
  • COMPUTER
  • CONTROL PANEL
  • COOLING ASSEMBLY
  • COOLING FAN - SWITCH
  • CRITICAL MESSAGES, RED
  • DEFAULT SETTINGS TABLE
  • DIESEL HEATER CONTROLS - OPTIONAL
  • DOORS, SERVICE ACCESS
  • EMERGENCY EXITS
  • ENGINE AIR INTAKE SYSTEM - 8***2601 TO 8***2632
  • ENGINE AIR INTAKE SYSTEM - 8***2633 TO 8***3500
  • ENGINE ANTI-STALL - SWITCH WITH LIGHT
  • ENGINE DIAGNOSTICS CONNECTION
  • ENGINE ENCLOSURE, DOOR/ROOF HYDRAULIC HAND PUMP
  • ENGINE ENCLOSURE, POWER DOOR/ROOF ELECTRIC PUMP
  • ENGINE FAULT CODE MESSAGES
  • ENGINE HOT WATER SHUT-OFF VALVES
  • ENGINE, RESTARTING AFTER ENGINE RUNS OUT OF FUEL
  • ER BOOM SYSTEM, SPECIAL OPERATING INSTRUCTIONS
  • FELLING HEAD OPERATING INSTRUCTIONS
  • FILTER, FRESH AIR - A/C UNIT
  • FILTER, RE-CIRCULATING AIR - A/C UNIT
  • FILTER RESTRICTION INDICATOR
  • FILTERS
  • FILTERS, HYDRAULIC OIL
  • FIRE SUPPRESSION SYSTEM, OPTIONAL
  • FOOT PEDALS, TRACK DRIVE
  • FUEL, BOTTOM FUELING SYSTEM
  • FUEL HEATER SWITCH
  • FUEL, REFUELING PROCEDURE
  • FUEL TANK
  • FUEL TANK, OPTIONAL HIGH CAPACITY
  • FUEL TANK, STANDARD
  • FUSE AND RELAY REAR PANEL
  • FUSES AND RELAYS, CAB
  • FUSES AND RELAYS, ENGINE COMPARTMENT
  • GRAFFITI REMOVAL
  • HAND PUMP OPERATION
  • HORN, SAFETY ALERT - SWITCH
  • HOT WATER SHUT-OFF VALVES (ENGINE)
  • HYDRAULIC OIL FILL PUMP -ELECTRICAL
  • HYDRAULIC OIL HEATER, OPTIONAL
  • HYDRAULIC OIL TANK
  • IGNITION KEY SWITCH
  • INFORMATION MESSAGES, BLUE
  • INSPECTION OF THE FIRE SUPPRESSION SYSTEM
  • INSTRUMENT PANEL
  • INTERIOR LIGHTS
  • JOYSTICKS, LEFT, AND RIGHT HAND
  • KEY SWITCH
  • LEVELING CONTROLS, JOYSTICKS
  • LIGHTS, INTERIOR
  • LIGHTS, SERVICE
  • LOAD SENSING, OPERATING TIPS
  • MACHINE PREPARATION
  • MANUAL OVERRIDE
  • MASTER ALARM
  • MASTER ALARM LIGHT
  • MASTER DISCONNECT SWITCH
  • MD3 COMPUTER, ELECTRONIC CONTROL, AND DISPLAY
  • MD3 COMPUTER MAIN DISPLAY
  • MD3 MESSAGES
  • MEASURING TRACK SAG
  • OIL HEATER, HYDRAULIC, OPTIONAL
  • OPERATING MACHINE
  • OPERATING TIPS WITH LOAD SENSING
  • PICTOGRAM DESCRIPTIONS
  • PILOT SYSTEM INTERLOCK SWITCH (FRONT DOOR)
  • PILOT SYSTEM “OFF “- PUSHBUTTON SWITCH
  • PILOT SYSTEM RESET - PUSHBUTTON SWITCH
  • PORTABLE FIRE EXTINGUISHERS, LOCATION
  • POWER DOOR
  • POWER ENGINE DOOR/ROOF - SWITCH
  • PUMP, ELECTRICAL, ENGINE ENCLOSURE DOOR/ROOF, HYDRAULIC
  • PUMP, HAND, ENGINE ENCLOSURE DOOR/ROOF, HYDRAULIC
  • PUMP, HYDRAULIC OIL FILL, ELECTRICAL
  • REFUELING PROCEDURE
  • REFUELING PROCEDURE, BOTTOM FUELING OPTION
  • RELAYS AND FUSES, CAB
  • RELAYS AND FUSES, ENGINE COMPARTMENT
  • REMOVAL OF ANTI-CORROSION SPRAY (IF APPLICABLE)
  • SAW - SWITCH
  • SCREEN SAVER ADJUSTMENT
  • SEAT
  • SERVICE ACCESS DOORS
  • SERVICE LIGHTS
  • SLOPE INDICATORS
  • STARTING ENGINE
  • STEREO AM/FM RADIO/CD
  • SWING BRAKE - SWITCH WITH LIGHT
  • SWING CONTROL, JOYSTICK
  • THROTTLE SWITCH
  • TRACK COMPONENTS
  • TRACK DRIVE, FOOT PEDALS
  • TRACK, LOW/DRIVE - SWITCH WITH LIGHT
  • TRAVELING (BOOM RAISED)
  • TRAVEL SPEED CONTROL LEVER
  • UNLOADER VALVE, ENGINE AIR CLEANER - 8***2601 TO 8***2632
  • UNLOADER VALVE, ENGINE AIR CLEANER - 8***2633 TO 8***3500
  • USB PORT - MD3 COMPUTER
  • VACUUM SWITCH, HYDRAULIC OIL TANK
  • WARMUP MODE
  • WINDOWS
  • WORK LIGHTS SWITCH
• SECTION 3 - LUBRICATION & MAINTENANCE
  • AIR CONDITIONING SYSTEM, CHECKING THE SYSTEM
  • AIR INTAKE SYSTEM, ENGINE - 8***2601 TO 8***2632
  • AIR INTAKE SYSTEM, ENGINE - 8***2633 TO 8***3500
  • APPROVED HYDRAULIC OILS
  • BOTTOM FUELING SYSTEM
  • CASE DRAIN STRAINERS
  • CONVERSION CHART, UNITS
  • DIFFUSERS/STRAINERS, HYDRAULIC TANK
  • EMERGENCY EXITS, CHECK MONTHLY
  • ENGINE AIR INTAKE SYSTEM - 8***2601 TO 8***2632
  • ENGINE AIR INTAKE SYSTEM - 8***2633 TO 8***3500
  • ER BOOM SYSTEM
  • FILTER RESTRICTION INDICATOR, ENGINE - 8***2601 TO 8***2632
  • FILTER RESTRICTION INDICATOR, ENGINE - 8***2633 TO 8***3500
  • FILTER RESTRICTION PRESSURE SWITCH
  • FILTERS
  • FIRE PREVENTION
  • FUEL, BOTTOM FUELING OPTION
  • FUEL, REFUELING PROCEDURE
  • FUEL TANK
  • FUEL TANK, OPTIONAL HIGH CAPACITY
  • FUEL TANK, STANDARD
  • FUEL TANK STRAINER
  • HYDRAULIC FILL PUMP FILTER - ELECTRICAL
  • HYDRAULIC OIL FILL PUMP -ELECTRICAL
  • HYDRAULIC OIL FILTERS
  • HYDRAULIC OIL OPERATING RANGE
  • HYDRAULIC OIL RETURN FILTERS
  • HYDRAULIC OIL TANK
  • HYDRAULIC TANK BREATHER
  • HYDRAULIC TANK CLEAN-OUT COVER
  • HYDRAULIC TANK PRESSURIZATION INSTRUCTIONS
  • LEVELER LUBRICATION POINTS
  • LUBRICATION POINTS DIAGRAM - 8***2601 TO 8***2632
  • LUBRICATION POINTS DIAGRAM - 8***2633 TO 8***3500
  • LUBRICATION POINTS DIAGRAM, LEVELLER
  • LUBRICATION SCHEDULE - 8***2601 TO 8***2632
  • LUBRICATION SCHEDULE - 8***2633 TO 8***3500
  • MEASURING TRACK SAG
  • NEW MACHINE MAINTENANCE
  • OIL ANALYSIS KITS
  • OIL ANALYSIS PROGRAM
  • PRESSURE AND SPEED SETTING
  • PRESSURE SETTING PROCEDURES, SEE THE SERVICE MANUAL
  • PREVENTIVE MAINTENANCE SCHEDULE
  • PUMP, HYDRAULIC OIL FILL, ELECTRICAL
  • REFUELING PROCEDURE
  • REFUELING PROCEDURE, BOTTOM FUELING OPTION
  • RETURN TUBE DIFFUSERS/STRAINERS 
  • SCHEDULED MAINTENANCE
  • SERVICE AND LUBRICATION POINTS
  • STRAINERS/DIFFUSERS, HYDRAULIC TANK
  • SWING DRIVE LUBRICATION
  • TORQUE CHART 
  • TORQUE CHART, GENERAL
  • TORQUE, FLUID CONNECTIONS
  • TORQUE SPECIFICATIONS, GENERAL 
  • TRACK CHAIN SAG
  • TRACK COMPONENTS
  • TRACK OPERATION AND WEAR PREVENTION
  • TRACKS, PROTECTING STEEL TRACKS
  • UNIT CONVERSION CHART
  • UNLOADER VALVE, ENGINE AIR CLEANER - 8***2601 TO 8***2632
  • UNLOADER VALVE, ENGINE AIR CLEANER - 8***2633 TO 8***3500
  • WEIGHTS OF COMMERCIAL WOOD
  • WIRE COLOUR CODE CHART
  • WOOD, WEIGHTS OF COMMERCIAL WOOD