Sany Trailer-Mounted Concrete Pump HBT6013C-5S Operation & Maintenance Manual PDF

This PDF Operation & Maintenance Manual provides safety, technical descriptions, operation, troubleshooting, and maintenance of the Sany Trailer-Mounted Concrete Pump HBT6013C-5S Model. In order to properly use your equipment, it is important to read this manual carefully before beginning any operations.

Information in this manual is used to guide qualified operators to operate and maintain trailer-mounted concrete pumps correctly.

This technical guide comes in PDF format. So, it doesn't require any installation (Instant Download). We recommend you use the application Adobe PDF Reader for working with PDF instructions. Also, we recommend you print this manual and use it as a handbook when it will be necessary.

For your convenience, we present you with a link 'Sany pdf manual instant preview' on the top of this page. This link will help you to preview this PDF manual and understand whether this manual contains needed for your service information or not. 

If you decide to purchase this guide on our website, then within 5-7 minutes you will receive an email with a link to download and further recommendations. If you have questions - write to us and we will answer them.

Models covered:
Trailer-Mounted Concrete Pump
HBT6013C-5S

CONTENTS:

• 1 INTRODUCTION
  • 1.1 Manual Section Descriptions
  • 1.2 Machine Serial Number & Information
  • 1.3 Contact Information
  • 1.4 Icons and Symbols
• 2 SAFETY
  • 2.1 Definition of Terms
  • 2.2 Designated Use
  • 2.2.1 Inspection intervals
  • 2.3 Use Contrary to Designated Use
  • 2.4 Exclusion of Liability
  • 2.5 Personnel
  • 2.6 Operating Instructions, Operating Procedures, and Other Regulations
  • 2.7 Personal Protective Equipment
  • 2.8 Before Starting Work
  • 2.9 Danger Due to High-voltage
  • 2.10 Stationary Machines
  • 2.11 Mobile Machines
  • 2.12 Placing Booms
  • 2.13 Delivery Line Systems
  • 2.14 Pumping Operations
  • 2.15 Cleaning
  • 2.16 Maintenance and Special Work
  • 2.17 Welding
  • 2.18 Working on the Placing Boom
  • 2.19 Safety-relevant Components
  • 2.20 Software
  • 2.21 Protective and Safety
  • 2.22 Electrical Power
  • 2.23 Hydraulic Systems
  • 2.24 Exhaust Fumes
  • 2.25 Functional Fluids
• 3 SYSTEM FUNCTIONS
  • 3.1 General Overview
  • 3.2 Mechanical System
  • 3.3 Cooling System
  • 3.4 Lubrication System
  • 3.5 Hydraulic System
  • 3.6 Electrical Control System
• 4 OPERATION
  • 4.1 The Requirement of Concrete
  • 4.2 Pipe Disposal
  • 4.3 Pre-operational Checks
  • 4.4 Set-up Site
  • 4.5 Starting Up
  • 4.6 Outrigger Set-up 
  • 4.7 Function Check
  • 4.8 Pumping Operation Hand Signals 
  • 4.9 Pumping Operation
  • 4.10 Equipment Clean-up
  • 4.11 Retracting the Outriggers
  • 4.12 Towing and loading
  • 4.13 Machine Decals
• 5 MAINTENANCE
  • 5.1 Routine Maintenance & Mandatory Overhaul
  • 5.2 General Tightening Torques
  • 5.3 Lubrication
  • 5.4 Working Media
  • 5.5 Visual Check
  • 5.6 Pumping System
  • 5.7 Hydraulic System
  • 5.8 Accumulator
  • 5.9 Oil Filter
  • 5.10 Air Filter
  • 5.11 Electrical System
  • 5.12 Power System
• 6 TROUBLESHOOTING
  • 6.1 Troubleshooting Mechanical System
  • 6.2 Troubleshooting Hydraulic System 
  • 6.3 Troubleshooting Lubrication System
  • 6.4 Troubleshooting Electric System
  • 6.5 Troubleshooting of Diesel Engine
• 7 SPECIFICATIONS
  • 7.1 Overall Technical Data
  • 7.2 Pumping System Technical Data
  • 7.3 Pumping Curve
• 8 APPENDIX
  • 8.1 Hydraulic Basic Diagram
  • 8.2 Electrical Basic Diagram