New Holland Combines CR920 CR940 CR960 CR970 CR980 Manual

About the New Holland Combines CR920 CR940 CR960 CR970 CR980 Manual
New Holland manual provides troubleshooting, overhaul, and pressure-testing instructions using recommended procedures and equipment. Following these instructions will ensure the safe, efficient, and timely completion of the service or repair the combines CR920, CR940, CR960, CR970, CR980. It covers:

CONTENTS:

• GENERAL INFORMATION
  • Foreword
  • Part and Accessories
  • Precautionary Statements
  • Personal Safety
  • Machine Safety
  • Safety Precautions
  • Personal Considerations
  • Equipment Considerations
  • General Considerations
  • Operational Considerations
  • Antifreeze (See Fire, Solvents, i.e., Isopropanol, Ethylene Glycol, Methanol)
  • Battery Acids (See Acids and Alkalis)
  • Brake and Clutch Linings and Pads (See Legal Aspects)
  • Brazing (See Welding)
  • Chemical Materials - General (See Legal Aspects)
  • Clutch Linings and Pads (See Brake and Clutch Linings and Pads)
  • Corrosion Protection Materials (See Solvents, Fire)
  • Cutting (See Welding)
  • Dewaxing (See Solvents and Fuels - Kerosene)
  • Dusts
  • Electric Shock
  • Exhaust Fumes
  • Fiber Insulation (See Dusts)
  • Fire (See Welding, Foams, Legal Aspects)
  • First Aid
  • Foams- Polyurethane (See Fire)
  • Fuels (See Fire, Legal Aspects, Chemicals - General, Solvents)
  • Gas Cylinders (See Fire)
  • General Workshop Tools and Equipment
  • High-Pressure Air, Lubrication and Oil Test Equipment
  • Legal Aspects
  • Lubricants and Greases
  • Paints (See Solvents and Chemical Materials - General)
  • Solder (See Welding)
  • Product Identification
  • Standard Torque Data for Hydraulic Tubes and Fittings
  • Pipe Thread Fitting Torque
  • Installation of ORFs (O-ring Flat Faced) Fittings
  • Lubrication
  • Sealants
• 10. ENGINE
  • 7.5L New Holland Engine
  • Cooling system
  • Remove and replace, 7.5L NH Engine
  • Fuel system, 7.5L NH Engine
  • 7.8L, 10.3L Description of operation
  • Remove and replace, Engine
• 14. LIVE PTO
  • Engine gearbox, Clutch pack Removal/Installation
  • Engine gearbox, Clutch pack rebuild
  • Engine gearbox, Removal/Installation
  • Engine gearbox, Rebuild
• 21. TRANSMISSION
  • Specifications
  • Tightening Torques
  • Gearbox shafts
  • Shifting diagram
  • Traction gearbox - removal
  • Traction gearbox - disassembly
  • Differential - D./A
  • Drive shaft - D./A
  • Input shaft - D./A
  • Traction gearbox - Assembly
  • Shifting disc and shifting drive gear - Installation
  • Input shaft - Installation
  • Drive shaft -- Installation
  • Selector shaft -- Installation
  • Differential half shafts and differential -- Installation
  • Cover - Installation
• 25. FRONT MECHANICAL DRIVE
  • Planetary final drives
  • 11/111 Final drives
• 29. HYDROSTATIC DRIVE
  • Hydrostatic Drive System Introduction
  • Hydrostatic System Operation
  • Filling the Hydrostatic System and Start-up Procedure
  • Powered Rear Axle
  • Pressure Testing and Troubleshooting
  • Hydrostatic Pump and Motor Repair
• 33. BRAKES AND CONTROLS
  • Brakes and Control
• 35. HYDRAULIC SYSTEMS
  • Introduction
  • Description of Operation
  • Pressure Testing and Faul Finding - The High and Low-pressure hydraulic system
  • Hydraulic Pump
  • Stack Valve Overhaul
• 37. TOWING HOOKS & BALLASTING
• 41. STEERING AXLE
  • Axle, General
  • Wheel Bearings
  • Steering Pivot
  • Center Section
• 48. SUSPENSION & TRACKS
• 50. CLIMATE CONTROL
  • A/C System
  • Air Filters
  • Blower Fans
  • Compressor
  • Condenser
  • Cool Box
  • Evaporator
  • Heater Core
  • High/Low-Pressure Cutout Switch
  • Receiver/Dryer
  • Thermal Expansion Valve
• 55. ELECTRICAL SYSTEM
  • General Information
  • Infoview - Monitor diagnostics
  • Electrical schematics
  • CAN Data bus network
  • Engine systems
  • Power distribution and lighting
  • Cab Systems
  • Hydraulic systems
  • Driveline systems
  • Header systems
  • Feeder systems
  • Threshing systems
  • Cleaning systems
  • Clean grain systems
  • Crop residue
  • Precision farming
  • Electrical connectors
  • CCM1 Error codes
  • CCM2 Error codes
  • CCM3 Error codes
  • Engine fault codes
  • HHC diagnostic codes
  • ASP fault codes
• 60. PRODUCT FEEDING
  • Feeder house
  • Feeder drives
  • Stone Ejection system
• 66. THRESHING
• 72. SEPARATION
• 74. CLEANING SYSTEM
• 80. GRAIN STORAGE
  • Clean Grain Transport
  • Unloading System
• 88. ACCESSORIES
  • Straw Chopper
  • Chaff/Corn spreader
• 90. PLATFORM, CAB, BODYWORK, AND DECALS
  • Cab
  • Shielding

There are numerous variations in procedures, techniques, tools, and parts for servicing combines, as well as in the skill of the individual doing the work. Therefore, follow all the recommendations you read in this manual and use your equipment and do not worry about repairs or maintenance. This comprehensive manual is suitable for professional technicians and novice mechanics alike.

Models:
CR920
CR940
CR960
CR970
CR980

Features of the Manual
Format: PDF
Language: English
Pages: 3516
Compatible with all versions of Windows, Mac, Linux, iPhone, iPad, and Android
In this manual, you will find a lot of diagrams with descriptions, tables, and schemes, detailed information, recommendations on the installation, disassembly, and assembly of parts, data of electrical and cooling systems, and much more helpful information (see general contents). Manual provides qualified, professional and timely information as well as troubleshooting information.

FAQs
How do I download the manual?
After completing the purchase, you will receive a download link via email. Please check your spam/junk folder if you don't see it in your inbox.

Is the manual printable?
You can easily print the desired text or image that will help your work.

Still have questions?

Leave us a messageand we will try to help.