Linde Reach Stacker C 4130/4/5 TL Service Training Manual PDF

This Linde Service Training Manual has been developed and collected by specialists in order to maintain the work of the Linde Reach Stackers C 4130/4 TL, and C 4130/5 TL. 

This factory information contains a system section, operation information, setting instructions, safety instructions, troubleshooting information, many pictures and drawings, circuit diagram, and schemes that will help you to better understand your equipment’s work.

The manual is presented in PDF format, which greatly simplifies its use since it does not require installation (INSTANT DOWNLOAD). To work with the PDF manual, we recommend that you use the Adobe Acrobat Reader application.

At the top of the page, you can see the link 'Linde pdf manual instant preview'. By clicking on it, you can see what this manual is all about, and what quality of the pictures and drawings are in it. You can also read the list of content that is presented below.

If you have any questions or problems with downloading the file, you can write to us and we will help you.

Models covered:
Linde Reach Stacker
C 4130/4 TL
C 4130/5 TL
Series 357

CONTENTS:

• LINDE REACH STACKER C 4130/4 TL, C 4130/5 TL, SERIES 357
  • 1 Diesel engine
  • 1.1 Engine specifications - 357/356
  • 1.2 Explanation of the engine number
  • 1.3 Adjusting the tappet clearances
  • 1.4 Drivebelts
  • 1.5 Cylinder head
  • 1.7 Checking engine timing
  • 1.8 Injection nozzles
  • 1.9 Removing and installing the fuel injection pump
  • 1.10 Fuel feed pump
  • 1.11 Engine shutdown solenoid
  • 1.12 Cleaning the turbocharger oil feed
  • 1.13 Perkins by-pass filter
  • 1.14 Thermostat 
  • 1.15 Coolant pump
  • 1.16 Fault diagnosis
  • 1.17 Torque loadings
  • 1.18 Special tools
• 2 Hydrodynamic travel drive
  • 2.1 Schematic diagram of the power train
  • 2.2 Full view of power shift transmission
  • 2.3 Troubleshooting
  • 2.4 D 101 Series Drive axle
• 3 Truck Body
  • 3.1 Chassis assembly
  • 3.2 Cabin
• 4 Steering system
  • 4.1 Steer axle Type L 101
  • 4.2 Steering hydraulics circuit diagram
  • 4.3 Description of the steering Hydraulics
  • 4.4 Removing and installing the steer axle
  • 4.5 Repairing the steer axle
  • 4.6 Special tools
• 5 Braking System
  • 5.1 Braking system circuit diagram
  • 5.2 Construction of the Wet Multiple Disc Brake
• 6 Electrical system
  • 6.1 Wiring diagrams
  • 6.2 Programmable computer control system
  • 6.3 Safety shutoff relay box (B7)
  • 6.4 Self-test Codes
  • 6.5 Additional information
• 7 Hydraulic system 
  • 7.1 Legend for hydraulic circuit diagrams 
  • 7.2 Hydraulic circuit diagram
  • 7.3 Working hydraulics Schematic with spreader pilot pressure damping
  • 7.4 Working hydraulics schematic with spreader boost pressure damping 
  • 7.5 Pilot circuit schematic with pilot pressure damping of spreader
  • 7.6 Pilot control circuit schematic with spreader boost pressure damping 
  • 7.7 Functional Description of the hydraulic system 
  • 7.8 Functional Description of the hydraulic control system
  • 7.9 Schematic of hydraulic system functions
• 8 Boom and Spreader 
  • 8.1 Boom
  • 8.2 Spreader Model 817
  • 8.3 Spreader model 857 (piggyback)
• 9 Optional equipment
  • 9.1 Automatic greasing system
  • 9.2 Sliding cabin
  • 9.3 Vertical Lift
• 10 Technical Data