Linde IC-Engined Fork Truck H 100/120/136/140/150/160 Service Training Manual PDF

This Linde Service Training Manual contains routine maintenance information, step-by-step instructions, and technical data for the Linde IC Engined Trucks H 100/120/136/150/160, H 100/120/140/150 Models.

This Linde guide contains clear information on all repair and maintenance procedures and helps to identify existing and potential problems, to carry out maintenance and repair problem areas, and troubleshooting the Linde forklifts.

For your convenience, we present you with a link 'Linde pdf manual instant preview' on the top of this page. This link will help you to preview this PDF manual and understand whether this manual contains needed for your service information or not.
 
This technical handbook comes in PDF format. So, it doesn't require any installation (Instant Download). We recommend you use the application Adobe PDF Reader for working with PDF instructions. Also, we recommend you print this manual and use it as a handbook when it will be necessary.

Models covered:
Linde IC Engined Truck
H 100/120/136/150/160
H 100/120/140/150
Series 354

CONTENTS:

• 1 ENGINE
  • 1 DIESEL ENGINE
  • 1.1 DIESEL ENGINE TO 11/97
  • 1.2 DIESEL ENGINE H 100/120/140/150/160
• 2 HYDRODYNAMIC TRANSMISSION AND DRIVE AXLE
  • 2.1 HYDRODYNAMIC TRAVEL DRIVE
  • 2.2 FULL VIEW OF POWER SHIFT TRANSMISSION 18000 AND 20000 SERIES
  • 2.3 TROUBLESHOOTING
  • 2.4 DRIVE AXLE
• 3. CHASSIS
  • 3.1 CHASSIS ASSEMBLY
  • 3.2 CABIN GLASS
• 4 STEERING AXLE
  • 4 SERIES 310 STEERING AXLE 
  • 4.1 DESCRIPTION
  • 4.2 STUB AXLE 
  • 4.3 INSTALLING AND ADJUSTING THE SWIVEL PIN
  • 4.4 WHEEL HUB
  • 4.7 REMOVING AND INSTALLING THE STEERING CYLINDER
  • 4.8 HYDRAULIC STEERING UNIT
• 5. AIR BRAKING SYSTEM
  • 5.1 AIR BRAKING SYSTEM CIRCUIT DIAGRAM
  • 5.2 DESCRIPTION OF THE AIR BRAKING SYSTEM
  • 5.3 DESIGNATION OF PORTS ON AIR BRAKE EQUIPMENT ACC. TO DIN 74 254
  • 5.4 COMPRESSORS
  • 5.5 PRESSURE RELIEF VALVE
  • 5.6 AIR DRYER
  • 5.7 SINGLE CHECK VALVE
  • 5.8 AIR TANK
  • 5.9 LOW AIR WARNING SWITCH
  • 5.10 CHANGEOVER VALVE
  • 5.11 FOOT BRAKE VALVE
  • 5.12 BRAKE CYLINDER
  • 5.13 MANIFOLD
  • 5.15 PNEUMATIC SERVO VALVES (PILOT VALVES) TO 04/96
  • 5.16 RELAY VALVE
  • 5.17 WHEEL BRAKE
• 6 ELECTRICAL SYSTEM
  • 6.1 ELECTRIC CIRCUIT WIRING DIAGRAM UP TO 4/96 
  • 6.2 ELECTRIC CIRCUIT WIRING DIAGRAM FROM 5/96 TO 01/01
  • 6.3 ELECTRIC CIRCUIT WIRING DIAGRAM FROM 01/01 INCLUDING CHANGES AT 11/01
  • 6.3 RELAY AND FUSE BOX WITH CABLE CONNECTIONS TO 01/01
  • 6.4 ELECTRONIC GEARCHANGE SYSTEM
  • 6.5 JOYSTICK CONTROL, FROM 05/96
• 7 HYDRAULICS
  • 7.1 HYDRAULIC CIRCUIT DIAGRAMS
  • 7.2 SUPPLY AND RETURN LINE LAYOUT
  • 7.3 LINE LAYOUT FOR WORKING HYDRAULICS - CONTROL VALVES - TANDEM PUMP
  • 7.4 HYDRAULIC TANDEM PUMP
  • 7.5 LOAD SENSING VALVE - PRIORITY VALVE
  • 7.6 HYDRAULIC CONTROL VALVES
  • 7.7 STEER HAND PUMP
  • 7.8 SHOCK VALVE
  • 7.9 ANTI-STALL CYLINDER - TO 09/99
  • 7.10 LOGIC VALVE
  • 7.11 SAFE LOWERING VALVE
  • 7.12 PRESSURE RELIEF VALVE SETTINGS - WORKING HYDRAULICS
• 8 MAST UNIT
  • 8.1 MAST TYPES
  • 8.2 AUXILIARY HYDRAULICS LINE LAYOUT
  • 8.3 MAST TYPE 171, 172 TO 01/01
  • 8.4 MAST UNIT ADJUSTMENT
  • 8.5 MAST TYPE 173 TO 09/99
  • 8.6 FITTING THE MAST
  • 8.7 LIFT CYLINDER
  • 8.8 TILT CYLINDER
• 9 OPTIONS AND ACCESSORIES
  • 9.1 CLIMATE CONTROL - OPERATION
  • 9.2 CENTRAL GREASING
  • 9.3 SPEED LIMITER
  • 9.4 DATA LOGGER - DAVIS DERBY TYPE
  • 9.5 SOOT FILTER
  • 9.6 FLUID PREHEATERS
  • 9.7 LOAD WEIGHING SYSTEM
• 10 MISCELLANEOUS 
  • 10.1 354 SERIES DIFFERENTIATING CHARACTERISTICS
  • 10.2 GENERAL TORQUES FOR SERIES 354 TRUCKS
  • 10.3 TRUCK DATA