Komatsu WA600-3 Wheel Loader Set of Manuals PDF

The Set of Manuals is designed specifically for the Komatsu WA600-3 Wheel Loader model which was written for the specialist to proper use, service, or troubleshooting. Electronic guides include several files with information about technical data, setting, operation instruction, specifications, maintenance, assembly procedure, the section about the necessary tools, drawings, diagrams, and schemes.

Factory material is the best and most comprehensive set that you can find for your Komatsu WA600-3 Wheel Loader model. Before using or servicing this equipment, we recommend that you read this tutorial and pay attention to the "safety" section and follow their detailed recommendations and instructions. If you decide to purchase this online text for your machine from us, you need to do is press the buy button and within 1-10 minutes you will receive an email the letter with all the recommendations for installation and use.

Komatsu product comes in PDF format in the English language. In order to view, as well as print or save the necessary information - we recommend installing the Adobe PDF Reader program. In case of any questions - write to us. Our managers will answer all your questions.

Operation and Maintenance Manual:
SERIAL NUMBERS 52001 and up
SERIAL NUMBERS WA600-3L - A52001 and up

Field Assembly Manual:
SERIAL NUMBERS WA600-3 50001 and up

General Table of Contents:

[1] Drawings of units divided for delivery
[2] Weight and dimensions table of units divided for delivery
[3] Assembly work schedule
[4] Necessary devices and tools
[5] Assembly procedure
(1) Installation of tire and wheel assembly
1) Positioning of vehicle
2) Removal of axle stand
3) Slinging of tire and wheel assembly
4) Installation of tire and wheel assembly
(2) Installation of muffler stack
(3) Installation of cab assembly
1) Removal of floor frame undercovers
2) Removal of cover in cab assembly
3) Slinging of cab assembly
4) Loosening of steering post lower bolt
5) Operation of steering tilt lever
6) Installation of seal
7) Lowering of cab assembly
8) Temporary tightening of steering post fixing bolts
9) Temporary tightening of cab assembly mounting bolts
10) Permanent tightening of steering post lower bolt
11) Permanent tightening of steering post fixing bolt
12) Connection of wiring connectors and washer vinyl tubes
13) Installation of troubleshooting switch
14) Installation of cover in cab assembly
15) Installation of steering post lower bellows
16) Installation of cab assembly right-hand cover
17) Installation of floor frame lower cover
18) Installation of mirrors and mirror stays
(4) Installation of ROPS canopy
1) Removal of antenna
2) Removal of rear frame ROPS support bolts tightened temporarily
3) Slinging of ROPS canopy
4) Installation of ROPS canopy
5) Installation of antenna to ROPS canopy
6) Installation of antennal wire hole grommet
(5) Installation of bucket
1) Installation of cord ring.
2) Aligning of bucket assembly and hinge pin holes
3) Selection of shim for bucket hinge pin
4) Insertion of bucket hinge pin
5) Installation of bucket hinge pin stopper
6) Installation of bucket hinge pin and retainer
7) Lowering of cord ring to groove
8) Installation of bucket link pin
9) Installation of grease nipple and plug
10) Measurement of steering wheel operating effort

Contents:

FOREWORD
SAFETY
OPERATION
MAINTENANCE
SPECIFICATIONS
ATTACHMENTS AND OPTIONS
INDEX