Komatsu Bulldozer D155AXi-8 Field Assembly Instruction PDF

This Field Assembly Instruction manual is arranged to give you a good understanding of the product and its safe operation. Its tutorial was written especially for Komatsu Bulldozer D155AXi-8 models. PDF guide includes knowledge of specifications, precautions for field assembly, necessary equipment information, a list of tools, check and maintenance procedures, and also many diagrams, different photos with step-by-step instructions, schemes for Komatsu Bulldozer D155AXi-8 models.

You can purchase this factory file on our website by clicking "Buy Now". The download link will be emailed on specified, in order details, email within 3-10 minutes of your purchase. All the questions you may have you can ask our managers. They will definitely help you.  

Table of Contents:

SPECIFICATIONS
PRECAUTIONS FOR FIELD ASSEMBLY
DISPOSAL OF REMOVED PARTS
ASSEMBLY PROCEDURE, NECESSARY EQUIPMENT, AND SCHEDULE
LAYOUT OF KIT
STYLE FOR TRANSPORTATION
LIST OF TOOLS FOR FIELD ASSEMBLING
SKETCH OF JIGS
TIGHTENING TORQUE
COATING MATERIALS LIST
SELECTION OF WIRE ROPES USED FOR ASSEMBLY Assembly
A-1. Unloading and installing tractor
A-2. Installation of trunnion
A-3. Installation of the blade lift cylinder
A-4. Assembly of blade
A-5. Installation of full roller guard
A-6. Installation of blade
A-7. Installation of ripper assembly
A-8. Check of oil and coolant levels
A-9. Lubricating
A-10. Bleeding air from hydraulic cylinders
A-11. Installation of platform
A-12. Installation of the radio antenna
A-13. Installation of radio device (other than North America)
A-14. Installation of additional working lamps
A-15. Installation of fire extinguisher
M. CHECK AND MAINTENANCE PROCEDURES AFTER COMPLETION OF ASSEMBLY
M-1. Replacement of return filter (Standard filter to flushing filter)
M-2. Flushing of the hydraulic circuit, and bleeding air from hydraulic cylinders (Part 1)
M-3. Replacement of return filter (Flushing filter to standard filter)
M-4. Bleeding air from hydraulic cylinders (Part 2)
M-5. Error code
CALIBRATION OF CUTTING EDGE
FIELD ASSEMBLY INSPECTION REPORT