Komatsu Bulldozer D155AX-6 Set of Operation and Maintenance Manuals PDF

Set of Operation and Maintenance Manuals was written especially for a specialist who has and works with this Komatsu Bulldozer D155AX-6 model and will familiarize you with repair information, setting instruction, technical maintenance, troubleshooting procedures, specifications, safety rules, service procedures, etc.

Also, you can find many different images, diagrams, schematics. Screenshots will help specialists to visually examine your equipment in parts, to understand correctly the location of each part of the bulldozer and how to use it. It is important to read all sections in this complete tutorial, especially the section about safety and follow all rules. This will help you to protect your machine from technical breakdowns and injuries, as well as extend the life of your device for many years.

If you decide to purchase this set of irreplaceable information for your technic from us, all you need to do is press the buy button and within 5-10 minutes you will receive an email the letter with all the recommendations for installation and use. In case of any questions,  we are ready to answer all your questions if necessary.

Table of Contents:

FOREWORD
BEFORE READING THIS MANUAL
SAFETY INFORMATION
INTRODUCTION
USE OF MACHINE
FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
VISIBILITY FROM OPERATOR'S SEAT
NECESSARY INFORMATION
PRODUCT IDENTIFICATION NUMBER (PIN), MACHINE SERIAL NO. PLATE
EPA REGULATIONS, ENGINE NUMBER PLATE
BLADE SERIAL NO. PLATE POSITION
RIPPER SERIAL NO. PLATE POSITION
ROPS, FOPS NO. PLATE POSITION
POSITION OF SERVICE METER
TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
SAFETY
SAFETY
SAFETY LABELS
POSITIONS OF SAFETY PICTOGRAMS
SAFETY LABELS
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
PRECAUTIONS BEFORE STARTING OPERATION
PREPARATIONS FOR SAFE OPERATION
FIRE PREVENTION
PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
DO NOT GET CAUGHT IN WORK EQUIPMENT
PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
UNAUTHORIZED MODIFICATION
PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
PRECAUTIONS FOR OPERATION
PRECAUTIONS FOR JOBSITE
STARTING ENGINE
OPERATION
TRANSPORTATION
TOWING
PRECAUTIONS FOR MAINTENANCE
PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
PRECAUTIONS FOR INSPECTION AND MAINTENANCE
OPERATION
GENERAL VIEW
GENERAL VIEW OF MACHINE
GENERAL VIEW OF CONTROLS AND GAUGES
EXPLANATION OF COMPONENTS
MACHINE MONITOR
SWITCHES
CONTROL LEVERS, PEDALS
DUST INDICATOR
FUSE BOX
DOOR POCKET
ASHTRAY
CAR RADIO, HANDLING
CAR STEREO, HANDLING
HANDLING AIR CONDITIONER
OPERATION
CHECK BEFORE STARTING ENGINE, ADJUST
STARTING ENGINE
OPERATIONS AND CHECKS AFTER STARTING ENGINE
STOPPING ENGINE
MOVING MACHINE
STOPPING MACHINE
SHIFTING GEAR
SHIFTING BETWEEN FORWARD AND REVERSE
STEERING MACHINE
PRECAUTIONS FOR OPERATION
PARKING MACHINE
CHECK AFTER STOPPING ENGINE
CHECK AFTER FINISHING WORK
LOCKING
RIPPER OPERATION
OPERATING METHOD FOR RIPPING OPERATIONS
WORK POSSIBLE USING BULLDOZER
ADJUSTING POSTURE OF WORK EQUIPMENT
TIPS FOR LONGER UNDERCARRIAGE LIFE
TRANSPORTATION
LOADING, UNLOADING WORK
METHOD OF LIFTING MACHINE
PRECAUTIONS FOR TRANSPORTATION
TRAVELING ON ROADS
REMOVAL OF CAB
COLD WEATHER OPERATION
PRECAUTIONS FOR LOW TEMPERATURE
AFTER COMPLETION OF WORK
AFTER COLD WEATHER
LONG-TERM STORAGE
BEFORE STORAGE
DURING STORAGE
AFTER STORAGE
STARTING MACHINE AFTER LONG-TERM STORAGE
TROUBLESHOOTING
AFTER RUNNING OUT OF FUEL
METHOD OF TOWING MACHINE
IF BATTERY IS DISCHARGED
OTHER TROUBLE
MAINTENANCE
GUIDES TO MAINTENANCE
OUTLINES OF SERVICE
HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
WEAR PARTS
WEAR PARTS LIST
RECOMMENDED FUEL, COOLANT, AND LUBRICANT
RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS
OTHER THAN KOMATSU GENUINE OIL
STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
TORQUE LIST
PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
SAFETY CRITICAL PARTS
MAINTENANCE SCHEDULE CHART
MAINTENANCE SCHEDULE CHART
SERVICE PROCEDURE
INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
WHEN REQUIRED
CHECK BEFORE STARTING
EVERY 250 HOURS SERVICE
EVERY 500 HOURS SERVICE
EVERY 1000 HOURS SERVICE
EVERY 2000 HOURS SERVICE
EVERY 4000 HOURS SERVICE
EVERY 8000 HOURS SERVICE
SPECIFICATIONS
SPECIFICATIONS
ATTACHMENTS, OPTIONS
GENERAL PRECAUTIONS
PRECAUTIONS RELATED TO SAFETY
INTRODUCTION OF ATTACHMENTS AND OPTIONS
INTRODUCTION OF ATTACHMENTS AND OPTIONS
HEADREST, HANDLING
CAP WITH LOCK, HANDLING
METHOD OF OPENING AND CLOSING CAP WITH LOCK
PROCEDURE FOR SELECTING RIPPER POINT
PROCEDURE FOR SELECTING RIPPER POINT
HANDLING MACHINES EQUIPPED WITH KOMTRAX
BASIC PRECAUTIONS
INDEX
OUTLINE OF ELECTRIC SYSTEM