JCB Installation Service Maintenance Manual for STAMFORD BC Generators PDF

This PDF manual contains guidance and instructions for the installation, servicing, and maintenance of STAMFORD BC Range of Generators.

It is not possible, within the scope of the manual, to teach the basic electrical and mechanical skills required to safely carry out the procedures enclosed. The manual is written for skilled electrical and mechanical technicians and engineers, who have prior knowledge and experience of generating equipment of this type.

The manual comes in PDF format and does not require installation (INSTANT DOWNLOAD). 
At the top of the page, you can see the link "JCB pdf manual instant preview" that shows you what this manual is all about, and what is the quality of pictures and drawings in it. You can also read an study the list of content that is presented below.

Publication No. 9806-4650

CONTENTS:

• SAFETY PRECAUTIONS
  • FIRST STEPS TO SAFE OPERATION 
  • WARNINGS & NOTICES USED IN THIS MANUAL
  • SKILL REQUIREMENTS OF PERSONNEL
  • ELECTRICAL EQUIPMENT
  • LIFTING 
• FOREWORD
  • THE MANUAL
  • SCOPE 
  • GENERATOR DESIGNATION
  • THE PRODUCT
  • SERIAL NUMBER LOCATION 
  • RATING PLATE
• CONTENTS
• INTRODUCTION
  • GENERAL DESCRIPTION
  • SELF-EXCITED AVRCONTROLLED GENERATORS
  • The MAIN STATOR POWERED AVR
  • FOR PARALLEL OPERATION
  • AUXILIARY WINDING
  • TRANSFORMER CONTROLLED GENERATORS
  • STANDARDS
  • EUROPEAN DIRECTIVES
• APPLICATION OF THE GENERATOR
  • ENVIRONMENTAL PROTECTION
  • AIRBORNE CONTAMINATES
  • HIGH HUMIDITY ENVIRONMENTS
  • VIBRATION
  • BEARINGS
• INSTALLATION INTO THE GENERATING SET
  • DELIVERY
  • HANDLING THE GENERATOR
  • STORAGE
  • AFTER STORAGE
  • ROTOR BALANCING
  • GENERATOR VIBRATION, FREQUENCY
  • SIDE LOADS
  • COUPLING ARRANGEMENTS
  • BCA, SINGLE BEARING COUPLING ALIGNMENT
  • EARTH ARRANGEMENT
  • PAINT FINISH
  • WARNING LABELS
  • PRE-RUNNING CHECKS
  • DIRECTION OF ROTATION
  • PHASE ROTATION
  • VOLTAGE AND FREQUENCY
  • AVR ADJUSTMENT
  • ACCESSORIES
• AUTOMATIC VOLTAGE REGULATORS
• INSTALLATION ON SITE
• SERVICE AND MAINTENANCE 
  • WINDING CONDITION
  • PROCEDURE FOR INSULATION TESTING
  • METHODS OF DRYING OUT GENERATORS
  • TYPICAL DRYING OUT CURVE
  • AIR FILTERS
  • MAINTENANCE
  • REMOVAL AND REPLACEMENT OF COMPONENT ASSEMBLIES
• SPARES AND AFTER-SALES SERVICE