JCB Excavators JS115, JS130, JS145 - Tier III Auto Service Manual PDF

All machinery can be hazardous. When a product is correctly operated and maintained, it is a safe product to work with. When it is carelessly operated or poorly maintained it can become a danger to you (the operator) and others.

Therefore, in order to keep the equipment in working and as efficient as possible, you should purchase this PDF service manual, which is designed to service the JCB Excavators JS115, JS130, JS145 - Tier III Auto.

This repair manual applies to such JCB Excavators JS115, JS130, JS145 - Tier III Auto models and contains repair information, descriptions and explanations of the optional equipment as well as standard equipment. In this manual, you will find information on the operation, maintenance and safe operation of JCB excavators. The service information and specifications given in this manual were absolutely accurate at the time of publication.

This workshop manual has sections and subsections, at the beginning of each section a short content is indicated, so that by looking into it you can immediately find out if there is information that you need in it. The illustrations complement the verbal descriptions in this manual in order to best show how to get the most out of it. the effectiveness of the listed excavators.

The manual is an electronic PDF manual, you can print it and use it as a book. We recommend using Adobe PDF Reader, to be sure all images/graphics will display correctly.

Publication No. 9803/9860-5

Models covered:
JCB JS115 from serial number 1703500 to 1703599,
JCB JS115 from serial number 1777500 to 1777999,
JCB JS130 from serial number 1535000 to 1535999,
JCB JS145 from serial number 1600011 to 1600999.

Contents:

• Section 1 - General Information
  • Introduction
  • Torque Settings
  • Service Tools
  • Service Consumables
  • Terms and Definitions
• Section 2 - Care & Safety
  • Safety Notices
  • Important Information 
  • Safety Check List 
  • Safety Labels
• Section 3 - Maintenance
  • Service Requirements 
  • Health and Safety 
  • Service Schedules 
  • Fluids, Lubricants, and Capacities 
  • Tools 
  • Prepare the Machine for Maintenance 
  • Cleaning the Machine 
  • Checking for Damage 
  • Daily Checking 
  • Greasing 
  • Electrical System 
  • Bolt and Nut Torque Specifications 
  • Engine 
  • Fuel System 
  • Hydraulic System 
  • Slew Gearbox 
  • Tracks and Running Gear 
  • Bucket 
  • Windscreen Washer 
  • Fire Extinguisher (If fitted) 
  • Troubleshooting 
• Section B - Body and Framework
  • Technical Data
  • Basic Operation
  • Fault Finding
  • Service Procedures
  • Cab Panels
• Section C - Electrics
  • Basic System Operation
  • Fault Finding
  • Service Procedure
  • Harness Data
• Section E - Hydraulics
  • Technical Data
  • Basic System Operation
  • Circuit Descriptions
  • Main Control Valve
  • Hydraulic Pump/Regulator
  • Remote Control Valve (Hand Control)
  • Travel Pedal Valve
  • Solenoid Valve (8 Spool)
  • Shuttle Valve
  • Cushion Valve
  • Slew Motor
  • Slew Motor Reduction Gearbox Assembly
  • Rotary Coupling
  • Hydraulic Rams
  • Service Procedure
  • Fault Finding
• Section F - Transmission
  • Technical Data
  • Fault Finding
  • Track Motor
  • Track Motor
  • Track Gearbox
• Section J - Track and Running Gear
  • Technical Data
  • Idler Wheel and Recoil Unit
  • Idler Wheel
  • Recoil Unit
  • Grease Cylinder
  • Drive Sprocket
  • Top Roller
  • Bottom Roller
• Section K - Engine
  • Technical Data
  • Fault Finding