Hitachi Zaxis Zx200lc Crawler Excavator Set of Manuals PDF

Use only verified technical information to operate and service correctly and safely the Hitachi crawler excavator. In this set of manuals, you find pictures with step-by-step recommendations, a preventive maintenance guide, troubleshooting information, and other necessary data (see below the contents and screenshots). This set of manuals is prepared by technicians with special training who know the best methods of repair and maintenance of the excavator Hitachi.

This set of manuals consists of three portions:
- The information included in the Technical Manual (Operational Principle) Manual No.:KM-178-E/Vol.No.: TO178-E-04: technical information needed for redelivery and delivery, operation, and activation of all devices and systems.

- The information included in the Technical Manual
(Troubleshooting) Manual No.:KM-178-E/Vol.No.: TT178-E-04: technical information needed for operational performance tests, and troubleshooting procedures.

- The information included in the Workshop Manual Manual No.:KM-178E/Vol.No.: W178-E-02: technical information needed for maintenance and repair of the machine, tools, and devices needed for maintenance and repair, maintenance standards, and removal/installation and assemble/ disassemble procedures.

The information is in PDF format in English. You can work with this set of manuals after installing Adobe Acrobat Reader. Thanks to the PDF format, it is possible to print the entire parts catalog or the individual diagrams and schemes.

It is easy to purchase this product. Just click on the 'Buy Now' button and follow the instructions. After payment, you will get the link for downloading your PDF Parts Catalog. So, after a few minutes, you will get your guide and you can start studying it. If you have questions, please write to us via our email - we will provide you with after-sales service support.

Models:
200
225USR
225US
230-270

GENERAL CONTENTS:

• 1. SECTION AND GROUP CONTENTS
  • SECTION 1 GENERAL INFORMATION
  • Group 1 Precautions for disassembling and Assembling
  • Group 2 Tightening Torque
  • Group 3 Painting
  • Group 4 Bleeding Air from Hydraulic Oil Tank
• 2. WORKSHOP MANUAL
  • SECTION 2 UPPER STRUCTURE
  • Group 1 Cab
  • Group 2 Counterweight
  • Group 3 Main Frame
  • Group 4 Pump Device
  • Group 5 Control Valve
  • Group 6 Swing Device
  • Group 7 Pilot Valve
  • Group 8 Pilot Shut-Off Valve
  • Group 9 Signal Control Valve
  • Group 10 Solenoid Valve
  • SECTION 3 UNDERCARRIAGE
  • Group 1 Swing Bearing
  • Group 2 Travel Device
  • Group 3 Center Joint
  • Group 4 Track Adjuster
  • Group 5 Front Idler
  • Group 6 Upper and Lower Roller
  • Group 7 Track
  • SECTION 4 FRONT ATTACHMENT
  • Group 1 Front Attachment
  • Group 2 Cylinder
  • SECTION 5 ENGINE
• 3. TECHNICAL MANUAL (Operational Principle)
  • SECTION 1 GENERAL
  • Group 1 Specification
  • Group 2 Component Layout
  • Group 3 Component Specifications
  • SECTION 2 SYSTEM
  • Group 1 Control System
  • Group 2 Hydraulic System
  • Group 3 Electrical System
  • SECTION 3 COMPONENT OPERATION
  • Group 1 Pump Device
  • Group 2 Swing Device
  • Group 3 Control Valve
  • Group 4 Pilot Valve
  • Group 5 Travel Device
  • Group 6 Signal Control Valve
  • Group 7 Others (Upperstructure)
  • Group 8 Others (Undercarriage)
• 4. TECHNICAL MANUAL (Troubleshooting)
  • SECTION 4 OPERATIONAL PERFORMANCE TEST
  • Group 1 Introduction
  • Group 2 Standard
  • Group 3 Engine Test
  • Group 4 Excavator Test
  • Group 5 Component Test
  • Group 6 Adjustment
  • SECTION 5 TROUBLESHOOTING
  • Group 1 General
  • Group 2 Component Layout
  • Group 3 Troubleshooting A
  • Group 4 Troubleshooting B
  • Group 5 Troubleshooting C
  • Group 6 Electrical System Inspection
  • Group 7 ICX