Hitachi Diesel Engine S6R PDF Engine Manual

This PDF Engine Manual covers standard specifications, describes specifications, maintenance standards, adjustments, disassembly, inspection and repair, reassembly instructions for S6R Diesel Engine.

This service manual describes the specifications of the Mitsubishi Diesel Engine and the maintenance and adjustment procedures. To maintain the performance of the engine for many years and to ensure safe operation, it is important to use the engine correctly and conduct regular inspection and maintenance, and also to take necessary measures which involve the disassembly, inspection, repair, and reassembly of the engine and engine parts.

This technical manual comes in PDF format. We recommend using Adobe Acrobat Reader, to be sure all images/graphics will display correctly. Working with this engine manual, you can easily copy, save, and print the information you need. If necessary, you can print pages, pictures, charts, or the entire manual completely.

In this service manual, the Mitsubishi Diesel Engine (standard model) specifications, maintenance standards, and adjustment procedure as well as service procedures such as disassembly, inspection, repair, and reassembly are arranged in groups for quick reference.

You can study this pdf manual using screenshots and a list of content, which is presented in the manual description. You can also follow the link 'Hitachi pdf manual instant preview', and preview the pages of this manual.

Vol No.: KM-926E-02

Models covered:
S6R

Contents:

• 1. General
  • Outline
  • Specifications
  • Tips on Disassembly and Reassembly
• 2. Maintenance Standards
  • Maintenance Standards Table
  • Tightening Torque Table
  • Sealants and Lubricants Table
• 3. Special Tools
  • Special Tool List
• 4. Overhaul Instructions
  • Determination of Overhaul Timing
  • Testing the Compression Pressure
• 5. Adjustments, Bench Testing, and Performance Tests
  • Adjustments
  • Bench Testing
  • Performance Tests (JIS Standard)
  • Engine Bench Testing Procedures
• 6. Engine Auxiliaries Removal and Installation
  • Preparation
  • Engine Auxiliaries Removal
  • Engine Auxiliaries Installation
• 7. Engine Main Parts
  • Cylinder Heads and Valve Mechanism
  • Cylinder Liners, Pistons, and Connecting Rods
  • Viscous Damper
  • Flywheel, Timing Gears, and Camshafts
  • Crankcase, Crankshaft, and Main Bearings
• 8. Inlet and Exhaust Systems
  • Description
  • Air Heater
  • Turbocharger
• 9. Lubrication System
  • Description
  • Oil Pump and Safety Valve
  • Relief Valve
  • Oil Cooler and Oil Thermostat
  • Oil Filters
• 10. Cooling System
  • Cooling System with a Radiator
  • Water Pump
  • Thermostats
  • Fan drive
• 11. Fuel System
  • Description
  • Fuel Filters
  • Fuel Injection Nozzles
  • Injection Pump
  • Feed Pump
  • Water Separator
• 12. Electrical System
  • Locations of Electrical Devices
  • Starter Alternator
• 13. Workshop Tips
  • Precautions for Disassembly and Reassembly
• 14. Adjusting Procedure of (Electric Governor) Actuator Controls
  • Foreword
  • Preparation before Adjustment
  • Connection of PC and Actuator Controller
  • Service Program Start-up
  • Setting Items List
  • Checks before Parts and/or Controller Setting Change
  • Parts and/or Controller Setting Change
  • Input for Releasing Protection
  • Control Link/Controller Setting
  • Resetting of Protection
  • PC Set-up (Confirmation of Faulty PC Start-up)
  • Malfunction Display
  • Tunable List (for Reference)