Hitachi Crawler Crane CX1800 Service Manual PDF

This Hitachi Set is specifically written to assist in the assembly and disassembly of parts and components, correct use and repair, and solve any problems for the Hitachi Crawler Crane CX1800 Model.

Thanks to all the recommendations and descriptions, you will be fully aware of all the warnings and cautions in this guide. These guides include detailed recommendations for correct use and repair, maintenance, setting, the engine section, troubleshooting, specifications information, safety rules, and more.

Be careful! Before using this equipment, please read the information provided in this set, and follow the instructions for maintenance and precautions, and you will avoid unexpected injuries and technical breakdowns. This set was written in English and covers pages for reading. For convenience, we recommend using Adobe Acrobat Reader to ensure the correct display of all graphics.

This set covers the following PDF manuals for the Hitachi Crawler Crane CX1800 Model:
Technical Manual (Operational Principle)
Technical Manual (Troubleshooting), Circuits & Harness
Workshop Manual

Models covered:
CX 1800

Vol Numbers:
TO331E-00
TT331E-00
W331E-00

CONTENTS (Operational Principle):

• SECTION 1 GENERAL
  • Group 1 Specification
  • Group 2 Component Layout
  • Group 3 Component Specifications
• SECTION 2 SYSTEM
  • Group 1 Control System
  • Group 2 Hydraulic System
  • Group 3 Electrical System
• SECTION 3 COMPONENT OPERATION
  • Group 1 Pump Device
  • Group 2 Swing Device
  • Group 3 Hoist Device
  • Group 4 Boom Hoist Device
  • Group 5 Control Valve
  • Group 6 Pilot Valve
  • Group 7 Travel Device
  • Group 8 Others (Superstructure)
  • Group 9 Others (Undercarriage)

CONTENTS (Troubleshooting):

• SECTION 4 OPERATIONAL PERFORMANCE TEST
  • Group 1 Introduction
  • Group 2 Engine Test
  • Group 3 Crane Test
  • Group 4 Component Test
  • Group 5 Standard
• SECTION 5 TROUBLESHOOTING
  • Group 1 Diagnosing Procedure
  • Group 2 Component Layout
  • Group 3 Troubleshooting A
  • Group 4 Troubleshooting B
  • Group 5 Troubleshooting C
  • Group 6 Electrical System Inspection

CIRCUIT DIAGRAM & HARNESS:
CX1800 ELECTRICAL CIRCUIT DIAGRAM
CX1800 HYDRAULIC CIRCUIT DIAGRAM
CX1800 CONNECTORS

CONTENTS (Workshop Manual):

• SECTION 1 GENERAL INFORMATION
  • Group 1 Precautions for Disassembling and Assembling
  • Group 2 Tightening
• SECTION 2 SUPERSTRUCTURE
  • Group 1 Cab
  • Group 2 Counterweight
  • Group 3 Main Frame
  • Group 4 Pump Device
  • Group 5 Control Valve
  • Group 6 Swing Device
  • Group 7 Hoist Device
  • Group 8 Boom Hoist Device
  • Group 9 Pilot Valve
  • Group 10 Pilot Shut-Off Valve
  • Group 11 Solenoid Valve
  • Group 12 Shuttle Valve
  • Group 13 Booster Valve
• SECTION 3 UNDERCARRIAGE
  • Group 1 Swing Bearing
  • Group 2 Travel Device
  • Group 3 Center Joint
  • Group 4 Track Adjuster
  • Group 5 Front Idler
  • Group 6 Upper and Lower Roller
  • Group 7 Track
  • Group 8 Side Frame Extend/Retract Cylinder
• SECTION 4 ENGINE AND ACCESSORY
  • General Information
  • Maintenance
  • Engine Assembly I (Disassembly)
  • Engine Assembly II (Inspection and Repair)
  • Engine Assembly III (Reassembly)
  • Lubricating System
  • Cooling System
  • Fuel System
  • Turbocharger
  • Engine Electricals
  • Troubleshooting
  • Special Tool List
  • Repair Standards
  • Conversion Table