Harley Davidson Touring Models 2015 Service Manual PDF

For complete service information also see:
Harley Davidson 2019 Touring Models Electrical Diagnostic Manual
Harley Davidson 2019 Touring Models Service Manual
Harley Davidson Touring Models 2018 Set of Diagnostic And Service Manuals
Harley Davidson Touring Models 2017 Service Manual

We provide you the PDF Service Manual with complete information that will help you properly use, maintenance, and repair for the Harley Davidson Motorcycles Touring Models 2015.

Also, this technical service guide helps to troubleshoot and solve any problems that arise, to find necessary service information about Harley Davidson products. The service manual contains the following data: complete information about maintenance, technical data, repair recommendations, service instruction, descriptions with screenshots, different diagrams, and many other helpful sections for Harley Davidson products.

The factory service guide comes in PDF format, includes high-quality scan pages on English. To work with the PDF manual, we recommend that you use the Adobe PDF Reader application. The Acrobat Reader allows anyone to view, navigate, and print documents in the Adobe Portable Document Format (PDF) by the click of your mouse.

You can purchase this product on our website by clicking "Buy Now". The download link will be emailed on specified, in order details, within several minutes.

If you have any questions or problems about install or using this file, please write to us - we will answer all your questions.

Models covered:
Touring Models

CONTENTS:

• MAINTENANCE
  • 1.1 FASTENER TORQUE VALUES
  • 1.2 GENERAL
  • 1.3 FUEL AND OIL
  • 1.4 BULB REQUIREMENTS
  • 1.5 MAINTENANCE SCHEDULE
  • 1.6 ENGINE OIL AND FILTER
  • 1.7 AIR CLEANER AND EXHAUST SYSTEM
  • 1.8 COOLANT
  • 1.9 TIRES AND WHEELS
  • 1.10 PRIMARY CHAINCASE LUBRICANT
  • 1.11 TRANSMISSION LUBRICANT
  • 1.12 CLUTCH CABLE: ROAD KING
  • 1.13 HYDRAULIC CLUTCH FLUID
  • 1.14 DRIVE BELT AND SPORCKETS
  • 1.15 REAR SPROCKET ISOLATOR
  • 1.16 CABLE AND CHASSIS LUBRICATION
  • 1.17 BRAKES
  • 1.18 BRAKE PADS AND DISCS
  • 1.19 SPARK PLUGS
  • 1.20 STEERING HEAD BEARINGS
  • 1.21 REAR SUSPENSION ADJUSTMENTS
  • 1.22 BATTERY MAINTENANCE
  • 1.23 HEADLAMP ALIGNMENT
  • 1.24 ENGINE MOUNTS
  • 1.25 STORAGE
  • 1.26 TROUBLESHOOTING
• CHASSIS
  • 2.1 FASTENER TORQUE VALUES
  • 2.2 SPECIFICATIONS
  • 2.3 VEHICLE IDENTIFICATION NUMBER (VIN)
  • 2.4 FRONT WHEEL
  • 2.5 REAR WHEEL
  • 2.6 REAR WHEEL COMPENSATOR
  • 2.7 WHEEL LACING: FRONT RIM
  • 2.8 WHEEL LACING: 16 INCH REAR RIM
  • 2.9 CHECKING AND TRUING WHEELS
  • 2.10 SEALED WHEEL BEARINGS
  • 2.11 TIRES
  • 2.12 FRONT BRAKE MASTER CYLINDER
  • 2.13 FRONT BRAKE CALIPER
  • 2.14 REAR BRAKE MASTER CYLINDER
  • 2.15 REAR BRAKE CALIPER
  • 2.16 BRAKE LINES
  • 2.17 ABS MODULE
  • 2.18 BLEEDING BRAKES
  • 2.19 FRONT FORK
  • 2.20 STEERING HEAD BEARNGS
  • 2.21 REAR SUSPENSION
  • 2.22 REAR FORK
  • 2.23 CLUTCH CABLE
  • 2.24 CLUTCH MASTER CYLINDER AND RESERVOIR
  • 2.25 HYDRAULIC CLUTCH HAND LEVER
  • 2.26 CLUTCH FLUID LINE
  • 2.27 BLEEDING CLUTCH CONTROL SYSTEM
  • 2.28 HANDLEBAR
  • 2.29 MIRRORS
  • 2.30 SEAT
  • 2.31 SADDLEBAGS
  • 2.32 SADDLEBAG SERVICE
  • 2.33 TOUR-PAK
  • 2.34 TOUR-PAK SERVICE
  • 2.35 TOUR-PAK BACKREST
  • 2.36 FAIRING LOWERS AND ENGINE  GUARD
  • 2.37 OUTER FAIRING AND WINDSHIELD: FORK MOUNTED FAIRING MODELS
  • 2.38 DASH PANEL: FORK MOUNTED FAIRING MODELS
  • 2.39 INNER FAIRING: FORK MOUNTED FAIRING MODELS
  • 2.40 INSTRUMENT BEZEL: FRAME MOUNTED FAIRING MODELS
  • 2.41 INSTRUMENT NACELLE: FRAME MOUNTED FAIRING MODELS
  • 2.42 OUTER FAIRING AND WINDSHIELD: FRAME MOUNTED FAIRING MODELS
  • 2.43 INNER FAIRING: FRAME MOUNTED FAIRING MODELS
  • 2.44 STORAGE COMPARTMENTS: FRAME MOUNTED FAIRING MODELS
  • 2.45 AIR DEFLECTORS
  • 2.46 WINDSHIELD: ROA KING MODELS
  • 2.47 HEADLAMP NACELLE: ROAD KING MODELS
  • 2.48 FRONT FENDER
  • 2.49 REAR FENDER
  • 2.50 REAR FASCIA
  • 2.51 REAR FRAME
  • 2.52 FOOTBOARDS AND FOOTRESTS
  • 2.53 JIFFY STAND
  • 2.54 FRONT ENGINE MOUNT
  • 2.55 MEDALLIONS, BADES AND TANK EMBLEMS
• ENGINE
  • 3.1 FASTENER TORQUE VALUES
  • 3.2 SPECIFICATIONS
  • 3.3 SERVICE WEAR LIMITS
  • 3.4 ENGINE OIL FLOW
  • 3.5 OIL PUMP OPERATION
  • 3.6 BREATHER OPERATION
  • 3.7 OIL PRESSURE
  • 3.8 TROUBLESHOOTING
  • 3.9 OIL COOLER
  • 3.10 OIL COOLER ADAPTER
  • 3.11 HOW TO USE THIS SECTION
  • 3.12 TOP END SERVICE
  • 3.13 CAM COMPARTMENT SERVICE
  • 3.14 STRIPPING MOTORCYCLE FOR SERVICE
  • 3.15 ASSEMBLING MOTORCYCLE AFTER SERVICE
  • 3.16 REMOVING ENIGNE FROM CHASSIS
  • 3.17 INSTALLING ENGINE IN CHASSIS
  • 3.18 TOP END OVERHAUL: DISASSEMBLY
  • 3.19 BREATHER ASSEMBLY
  • 3.20 ROCKER ARM SUPPORT PLATE
  • 3.21 PUSHRODS, LIFTERS AND COVERS
  • 3.22 CYLINDER HEAD
  • 3.23 CYLINDER
  • 3.24 PISTON
  • 3.25 TOP END OVERHAUL: ASSEMBLY
  • 3.26 CAM COMPARTMENT AND COMPONENTS
  • 3.27 OIL PUMP
  • 3.28 CRANKCASE DISASSEMBLY AND REPAIR
  • 3.29 FLYWHEEL AND CONNECTING RODS
  • 3.30 CRANKCASE ASSEMBLY
  • 3.31 OIL PAN
• FUEL SYSTEM
  • 4.1 FASTENER TORQUE VALUES
  • 4.2 SPECIFICATIONS: FUEL SYSTEM
  • 4.3 FUEL PRESSURE TEST
  • 4.4 INTAKE LEAK TEST
  • 4.5 AIR CLEANER ASSEMBLY
  • 4.6 FUEL TANK
  • 4.7 FUEL TANK TOP PLATE
  • 4.8 FUEL FILTER
  • 4.9 FUEL PRESSURE REGULATOR
  • 4.10 FUEL LEVEL SENDER
  • 4.11 TWIST GRIP SENSOR (TGS)
  • 4.12 THROTTLE CONTROL ACTUATOR (TCA)
  • 4.13 INDUCTION MODULE
  • 4.14 TEMPERATURE MANIFOLD ABSOLUTE PRESSURE SENSOR (TMAP)
  • 4.15 HEATED OXYGEN SENSORS (HO2)
  • 4.16 FUEL INJECTORS
  • 4.17 FUEL PUMP
  • 4.18 EXHAUST SYSTEM
  • 4.19 ACTIVE EXHAUSTl HDI
  • 4.20 EVAPORATIVE EMISSIONS CONTROL SYSTEM
• DRIVE
  • 5.1 FASTENER TORQUE VALUES
  • 5.2 SPECIFICATIONS: DRIVE
  • 5.3 PRIMARY CHAINCASE COVER
  • 5.4 DRIVE COMPONENTS
  • 5.5 PRIMARY CHAINCASE HOUSING
  • 5.6 CLUTCH: CONVENTIONAL
  • 5.7 CLUTCH: ASSIST AND SLIP
  • 5.8 HYDRAULIC CLUTCH RELEASE BEARING AND PUSHROD
  • 5.9 TRANSMISSION SPROCKET
  • 5.10 DRIVE BELT
• TRANSMISSION
  • 6.1 FASTENER TORQUE VALUES
  • 6.2 SPECIFICATIONS: TRANSMISSION
  • 6.3 TRANSMISSION
  • 6.4 SHIFTER LINKAGE
  • 6.5 CLUTCH RELEASE COVER: CABLE CLUTCH
  • 6.6 TRANSMISSION SIDE COVERS: HYDRAULIC CLUTCH
  • 6.7 SECONDARY CLUTCH ACTUATOR
  • 6.8 TRANSMISSION ASSEMBLY
  • 6.9 MAIN DRIVE GEAR AND BEARING
  • 6.10 TRANSMISSION CASE
• ELECTRICAL
  • 7.1 FASTENER TORQUE VALUES
  • 7.2 SPECIFICATIONS: ELECTRICAL
  • 7.3 SYSTEM FUSES AND RELAYS
  • 7.4 ELECTRONIC CONTROL MODULE (ECM)
  • 7.5 BODY CONTROL MODULE (BCM)
  • 7.6 ELECTRICAL CADDIES
  • 7.7 IGNITION COIL
  • 7.8 STARTER
  • 7.9 HEADLAMP
  • 7.10 AUXILIARY/FPG LAMPS AND BRACKETS
  • 7.11 REAR LIGHTING
  • 7.12 FENDER TIP LAMPS
  • 7.13 TOUR-PAK LIGHTS
  • 7.14 TURN SIGNAL LAMPS
  • 7.15 IGNITION SWITCH AND FORK LOCK
  • 7.16 ACCESSORY SWITCHES
  • 7.17 CRANKSHAFT POSITION SENSOR (CKP)
  • 7.18 ENGINE TEMPERATURE SENSOR (ET)
  • 7.19 AUTOMATIC COMPRESSION RELEASE (ACR)
  • 7.20 VOLTAGE REGULATOR
  • 7.21 ALTERNATOR
  • 7.22 VEHICLE SPEED SENSOR (VSS)
  • 7.23 WHEEL SPEED SENSORS
  • 7.24 NEUTRAL SWITCH
  • 7.25 OIL PRESSURE SWITCH OR SENDER
  • 7.26 STOP LAMP SWITCHES
  • 7.27 HORN
  • 7.28 FAIRING POWER OUTLET
  • 7.29 GAUGES AND INSTRUMENTS: FAIRING MODELS
  • 7.30 GAUGES AND INSTRUMENTS: ROAD KING MODELS
  • 7.31 INDICATOR LAMPS: ROAD KING MODELS
  • 7.32 BOOM! BOX INFOTAINMENT SYSTEM
  • 7.33 ANTENNA CABLES
  • 7.34 WIRE TROUGH
  • 7.35 MAIN WIRING HARNESS
  • 7.36 FAIRING HARNESS
  • 7.37 HANDLEBAR SWITCH PACKS
  • 7.38 HFSM MAINTENANCE
  • 7.39 PERSONAL IDENTIFICATION NUMBER (PIN)
  • 7.40 H-DSSS ACTUATION
  • 7.41 SECURITY SIREN
• APPENDIX A CONNECTOR REPAIR
  • A.1 AUTOFUSE UNSEALED ELECTRICAL CONNECTORS
  • A.2 BOSCH COMPACT 1.1M CONNECTOR
  • A.3 BOSCH BTC SEALED CONNECTOR
  • A.4 DELPHI 100W MICRO-PACK SEALED CONNECTOR
  • A.5 DELPHI 150 METRI-PACK SEALED CONNECTORS
  • A.6 DELPHI 280 METRI-PACK UNSEALED CONNECTORS
  • A.7 DELPHI 480 METRI-PACK UNSEALED CONNECTORS
  • A.8 DELPHI 630 METRI-PACK UNSEALED CONNECTORS
  • A.9 DELPHI 800 METRI-PACK SEALED MAIN FUSE HOUSING
  • A.10 DELPHI METRI-PACK TERMINAL REPAIR
  • A.11 DELPHI MICRO 64 SEALED CONNECTORS
  • A.12 DELPHI GT 150 SEALED CONNECTORS
  • A.13 DEUTSCH DT SEALED CONNECTORS
  • A.14 DEUTSCH DT SEALED TERMINAL REPAIR
  • A.15 DEUTSCH DTM SEALED MINI TERMINAL REPAIR
  • A.16 DEUTSCH DTM SEALED SOLID BARREL MINI TERMINAL REPAIR
  • A.17 JAE MX19 SEALED CONNECTORS
  • A.18 MOLEX CMC SEALED CONNECTORS
  • A.19 MOLEX MX 150 SEALED CONNECTORS
  • A.20 TYCO 040 MULTILOCK UNSEALED CONNECTOR
  • A.21 TYCO 070 MULTILOCK UNSEALED CONNECTOR
  • A.22 TYCO GET 64 SEALED CONNECTOR
  • A.23 TYCO MCP SEALED CONNECTOR
  • A.24 SEALED SPLICE CONNECTORS
• APPENDIX B WIRING
  • B.1 CONNECTORS
  • B.2 WIRING DIAGRAMS
• APPENDIX C COOLING SYSTEM
  • C.1 FASTENER TORQUE VALUES
  • C.2 SPECIFICATIONS: COOLING SYSTEM
  • C.3 COOLING SYSTEM OPERATION
  • C.4 TESTING AND DIAGNOSTICS
  • C.5 COOLING SYSTEM REPAIR
• APPENDIX D REFERENCE
  • D.1 METRIC CONVERSION
  • D.2 FLUID CONVERSION
  • D.3 TORQUE CONVERSION
  • D.4 GLOSSARY
• REFERENCE MATERIAL
  • TOOLS
  • TORQUE VALUES
  • INDEX