Fendt Tractor 512, 513, 514, 516 Vario Profi-ProfiPlus Maintenance Operator’s Manual PDF

For complete service information also see:
Fendt Tractor 512, 513, 514, 516 Vario Power Operator’s Manual

This PDF Operator’s Manual is applicable for Fendt Tractors 512, 513, 514, 516 Vario Profi-ProfiPlus. It will help you correctly use the above equipment,  troubleshooting, solve problems and get the maximum benefit from it.

This Fendt factory guide includes important safety rules for correct use, troubleshooting, operating instruction, specification, maintenance information, and so on. All illustration will be useful and has clear instructions about Fendt tractors.

If you decide to purchase this tutorial from us, all you need to do is press the purchase button, and within 5-10 minutes you will receive an e-mail with all the recommendations for installation and use. A program is designed to work on a personal computer or laptop. We recommend using Adobe PDF Reader. Any questions you have not understood, feel free to contact us. Our managers will be happy to answer all your questions.

Models covered:
Fendt 512 Vario
From chassis no. 413/21/0101
Fendt 513 Vario
From chassis no. 414/21/0101
Fendt 514 Vario
From chassis no. 415/21/0101
Fendt 516 Vario
From chassis no. 416/21/0101

Contents:

• 1. Safety instructions
  • 1.1 Introduction
  • 1.2 Safety - symbols and terms used
  • 1.3 Special safety instructions for tractor maintenance
• 2 Service and maintenance
  • 2.1 General
  • 2.2 Bonnet
  • 2.3 Engine oil change
  • 2.4 Fuel system
  • 2.5 Dry air filter
  • 2.6 Cooling system
  • 2.7 V-belt
  • 2.8 Front PTO
  • 2.9 Four-wheel drive axle
  • 2.10 Transmission and axle drives
  • 2.11 Hydraulic system
  • 2.12 Steering and front wheels
  • 2.13 Heating and ventilation
  • 2.14 Compressed air system
  • 2.15 Windscreen washer
  • 2.16 Cleaning the tractor
  • 2.17 Electrical and electronic system
  • 2.18 Fuses
• 3 Faults and remedy
  • 3.1 Warning and fault messages
  • 3.2 Information and fault messages Variotronic TI and Implement control
  • 3.3 Fault code tables
  • 3.4 Emergency mode
• 4 Technical data
  • 4.1 Technical data
  • 4.2 Tires
  • 4.3 Fuels and lubricants
  • 4.4 Vehicle registration on Agco Net
• 5 Lubrication and maintenance plan
  • 5.1 Lubrication chart
  • 5.2 Maintenance schedule
• Alphabetical index