Fendt Tractor 512, 513, 514, 516 Vario Power Maintenance Operator’s Manual PDF

For complete service information also see:
Fendt Tractor 512, 513, 514, 516 Vario Power Operator’s Manual

This PDF Operator’s Manual will be useful for specialists who work with Fendt Tractors 512, 513, 514, 516 Vario Power Models. This electronic guide covers sections about care and safety rules, complete specifications information, operation recommendations, technical maintenance, troubleshooting, and unloading and assembly section for Fendt Tractors.

Read the respective sections of this tutorial carefully and familiarize yourself with all of the instructions before attempting to start any procedures with your device. Information in this electronic guide is presented in such a way that an inexperienced master or owner will understand the entire text.

This technical manual comes in PDF format. So, it doesn't require any installation (Instant Download). We recommend you to use the application Adobe PDF Reader for working with PDF instruction. Also, we recommend you print this manual and use it as a handbook when it will be necessary.

For your convenience, we present you with a link 'Fendt pdf manual instant preview' on the top of this page. This link will help you to preview this PDF manual and understand that this manual contains needed for your service information or not. 

Models covered:
Fendt 512 Vario Power
From chassis no. 413/23/0101
Fendt 513 Vario Power
From chassis no. 414/23/0101
Fendt 514 Vario Power
From chassis no. 415/23/0101
Fendt 516 Vario Power
From chassis no. 416/23/0101

Contents:

• 1. Safety instructions
  • 1.1 Introduction
  • 1.2 Safety - symbols and terms used
  • 1.3 Special safety instructions for tractor maintenance
• 2 Service and maintenance
  • 2.1 General
  • 2.2 Bonnet
  • 2.3 Engine oil change
  • 2.4 Fuel system
  • 2.5 Dry air filter
  • 2.6 Cooling system
  • 2.7 V-belt
  • 2.8 Front PTO
  • 2.9 Four-wheel drive axle
  • 2.10 Transmission and axle drives
  • 2.11 Hydraulic system
  • 2.12 Steering and front wheels
  • 2.13 Heating and ventilation
  • 2.14 Compressed air system
  • 2.15 Windscreen washer
  • 2.16 Cleaning the tractor
  • 2.17 Electrical and electronic system
  • 2.18 Fuses
• 3 Faults and remedy
  • 3.1 Warning and fault messages
  • 3.2 Information and fault messages Variotronic TI and Implement control
  • 3.3 Fault code tables
  • 3.4 Emergency mode
• 4 Technical data
  • 4.1 Technical data
  • 4.2 Tires
  • 4.3 Fuels and lubricants
  • 4.4 Vehicle registration on Agco Net
• 5 Lubrication and maintenance plan
  • 5.1 Lubrication chart
  • 5.2 Maintenance schedule
• Alphabetical index