Fendt Rubber Track Tractor 1149MT, 1154MT, 1159MT, 1165MT Workshop Service Manual PDF

For complete service information also see:
Fendt Rubber Track Tractor 1149MT, 1154MT, 1159MT, 1165MT Operator’s Manual

This PDF Workshop Service Manual includes instructions for maintenance, special troubleshooting instructions, diagrams, and charts, destined for the serve Fendt Rubber Track Tractors 1149MT, 1154MT, 1159MT, 1165MT Models.

All sections with information we recommend and describe in this electronic guide are effective methods of performing use, maintenance, and repair. The factory file includes general specifications, the section about safety, detailed information about tools, overhaul procedures, also illustrations, schemes, and diagrams for Fendt rubber track tractors. All screenshots and schemes will help you to visually examine your device in parts.

To purchase this pdf tutorial, click the 'Buy Now' button. Fill out the proposed form and within a few minutes, a letter with all the recommendations and installation instructions will be sent to your e-mail. If you have any questions or suggestions - write to us.

Before buying, you can study this parts catalog with a preview. To do this, just go to those from the link above 'Fendt pdf manual instant preview'. You can also preview information about the contents of the manual in the list of content, which is presented below.

Models covered:
1149MT,
1154MT,
1159MT,
1165MT.

Contents:

• 1 General
  • 1.1 Safety information
  • 1.2 Machine identification information
  • 1.3 Serial number definition
  • 1.4 Proper disposal of waste
  • 1.5 Lubricant viscosities and refill capacities
  • 1.6 Service intervals
  • 1.7 Maintenance access
  • 1.8 Engine specifications
  • 1.9 Torque specifications
  • 1.10 Dimensions
  • 1.11 Shipping weights
  • 1.12 Machine specifications
• 2 Engine, fuel, and exhaust system
  • 2.1 Engine maintenance
  • 2.2 Fuel system components
  • 2.3 Flush and refill the cooling system
  • 2.4 Engine troubleshooting
  • 2.5 Fuel system components
  • 2.6 Exhaust system components
  • 2.7 SCR system
  • 2.8 Fluid specifications
  • 2.9 Safety instructions
  • 2.10 To the user
  • 2.11 Engine construction
  • 2.12 Technical data
  • 2.13 Liquid quality requirements
  • 2.14 Tightening torques
  • 2.15 Special tools
  • 2.16 Major maintenance and engine replacement
  • 2.17 Cylinder block
  • 2.18 Flywheel housing
  • 2.19 Cylinder head
  • 2.20 Valve mechanism
  • 2.21 Crankshaft
  • 2.22 Connecting rods and pistons
  • 2.23 Flywheel
  • 2.24 Timing gear assembly
  • 2.25 Belts
  • 2.26 Lubrication system
  • 2.27 Cooling system
  • 2.28 Air control system maintenance
  • 2.29 Fuel system
  • 2.30 SCR system
  • 2.31 Engine control system
  • 2.32 Terminal diagram
• 3 Steering system
  • 3.1 Steering system introduction
  • 3.2 Main steering system components
  • 3.3 Steering electrical system
  • 3.4 Steering hydraulic system
  • 3.5 Position of electronic components
  • 3.6 Position of hydraulic components
  • 3.7 Steering system components
  • 3.8 Steering system test and adjust
  • 3.9 Steering system maintenance
• 4 Drivetrain system
  • 4.1 Transmission system
  • 4.2 Transmission
  • 4.3 Drivetrain components
  • 4.4 Final drives
  • 4.5 Steering differential
  • 4.6 Steering motor drive
  • 4.7 Drive train maintenance
  • 4.8 Drive train testing and adjusting
• 5 Brake system
  • 5.1 Service brake system
  • 5.2 Hydraulic trailer brake system
  • 5.3 Air trailer brake system
  • 5.4 Parking brake system
  • 5.5 Brake system disassembly and assembly
  • 5.6 Brake system test and adjust
  • 5.7 Brake system troubleshooting
• 6 Compressed air system
  • 6.1 Air system operation
  • 6.2 Air system components
  • 6.3 Air compressor
  • 6.4 Air dryer
  • 6.5 Main air reservoir
  • 6.6 Air regeneration reservoir
  • 6.7 Air trailer brakes
  • 6.8 Air system component specifications
• 7 Hydraulic system
  • 7.1 Hydraulic system operation
  • 7.2 Hydraulic system components
  • 7.3 Hydraulic system testing and adjusting
  • 7.4 Hydraulic system maintenance
  • 7.5 Implement system troubleshooting
• 8 Electrical system
  • 8.1 General information
  • 8.2 Main fuse panel
  • 8.3 Electrical system components
  • 8.4 Electrical system troubleshooting
  • 8.5 00 Engine module
  • 8.6 03 Transmission
  • 8.7 05 Armrest module
  • 8.8 161 Auxiliary valves 1 module
  • 8.9 162 Auxiliary valves 2 module
  • 8.10 163 Auxiliary valves 3 module
  • 8.11 164 Auxiliary valves 4 module
  • 8.12 165 Auxiliary valves 5 module
  • 8.13 166 Auxiliary valves 6 module
  • 8.14 171 3-Point linkage valve module
  • 8.15 175 Unassigned auxiliary valve module
  • 8.16 208 Front-lighting module
  • 8.17 209 Roof lighting module
  • 8.18 210 Rear lighting module
• 9 Cab
  • 9.1 Removing and installing the cab
  • 9.2 Primary fresh air filter
  • 9.3 Recirculation filter
  • 9.4 Filter maintenance
  • 9.5 Armrest
  • 9.6 Cab seat
  • 9.7 Cab switches
  • 9.8 Steering console
• 10 Air conditioning and heating system
  • 10.1 Air conditioning and heating system
  • 10.2 Testing and adjusting
  • 10.3 Basic air conditioning system testing
  • 10.4 Manifold gauge set readings
  • 10.5 Checking the system pressure
  • 10.6 Refrigerant recovery
  • 10.7 Air conditioning and heating system components
  • 10.8 Heating and air conditioning troubleshooting
• 11 Chassis
  • 11.1 Engine cover
  • 11.2 Handall
  • 11.3 Steps
  • 11.4 Platforms
  • 11.5 Fenders
• 12 Track belt system
  • 12.1 Undercarriage system operation
  • 12.2 Undercarriage system components
  • 12.3 Undercarriage width adjustment
  • 12.4 Track detension/tension
  • 12.5 Track system
  • 12.6 Replace the track
  • 12.7 Track alignment
  • 12.8 Undercarriage components removal and installation
  • 12.9 Undercarriage maintenance
• 13 Implement drive system
  • 13.1 Power take-off system
  • 13.2 Power take-off
  • 13.3 Power take-off system testing and adjusting
• 14 Implement lift system
  • 14.1 3-point linkage system introduction
  • 14.2 3-point linkage components
  • 14.3 Position of electronic components
  • 14.4 Position of hydraulic components
  • 14.5 3-point linkage system options
  • 14.6 3-point linkage system control settings
  • 14.7 3-point linkage control valve
  • 14.8 Steerable 3-point linkage control valve operation
  • 14.9 3-point linkage disassembly and assembly
  • 14.10 3-point linkage system testing and adjusting
  • 14.11 3-point linkage troubleshooting
• 15 Attachments
  • 15.1 Drawbar maintenance
  • 15.2 Ballast
  • 15.3 Weight removal and installation
• 16 Diagrams
  • 16.1 Electrical schematics
  • 16.2 Hydraulic schematics
• 17 Special tools
  • 17.1 Drive train special tools
• 18 Index