Clark Electric Pallet Truck WPX20 PDF Service Manual

Clark electric pallet truck WPX20 service manual contains everything you will need to repair, rebuild, refurbish or restore your equipment. All diagnostic and repair procedures are covered. The manual has detailed illustrations, diagrams, wiring schematics and specifications as well as step-by-step instructions. All pages are printable, so print off what you need and take it with you into the garage or workshop. This manual is your number one source for repair and service information. This manual specifically is written for the novice as well as the experienced mechanic. Using this repair manual is an inexpensive way to keep your equipment working properly. Workshop manual provides step-by-step instructions based on the complete disassembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure.

If a breakdown occurs, using the diagrams, you can easily eliminate them. Thanks to the PDF format, it is possible to print the entire instruction or the individual diagrams and schemes. You can work with this manual after installing Adobe PDF Reader.

Models:
WPX 20

Table of contents:

• 1. Description
  • 1-1. INTRODUCTION
  • 1-2. GENERAL DESCRIPTION
  • 1-3. SAFETY FEATURES
• 2. Operation
  • 2-1. GENERAL
  • 2-2. OPERATING PRECAUTIONS
  • 2-3. BEFORE OPERATION
  • 2-4. GENERAL CONTROL OPERATION
  • 2-5. DRIVING AND STOPPING PROCEDURES
  • 2-6. BELLY-BUTTON SWITCH
  • 2-7. STEERING ARM GAS SPRING
  • 2-8. LIFT AND LOWER CONTROLS
  • 2-9. LOADING AND UNLOADING
  • 2-10. PARKING
• 3. Planned Maintenance
  • 3-1. GENERAL
  • 3-2. MONTHLY AND QUARTERLY CHECKS
  • 3-3. BATTERY CARE
  • 3-4. CHARGING BATTERIES
  • 3-5. LUBRICATION
• 4. Troubleshooting
  • 4-1. GENERAL
  • 4-2. CONTROLLER TROUBLESHOOTING
• 5. Operating Control System
  • 5-1. CONTROL HEAD
  • 5-2. COMPARTMENT COVERS
  • 5-3. STEERING ARM
• 6. Brake Servicing
  • 6-1. BRAKES
• 7. Driving system
  • 7-1. DRIVE WHEEL
  • 7-2. TRANSMISSION
  • 7-3. LOAD WHEEL
• 8. Elevation System Servicing
  • 8-1. LIFT LINKAGE
  • 8-2. POWER SECTION AND FORK SECTION
• 9. Hydraulic System
  • 9-1. LINES AND FITTINGS
  • 9-2. HYDRAULIC PUMP, MOTOR, AND RESERVOIR ASSY
• 10. Electrical Components
  • 10-1. ELECTRICAL CONTROL PANEL
  • 10-2. HORN REPLACEMENT
  • 10-3. LIFT LIMIT SWITCH
  • 10-4. PUMP-MOTOR
  • 10-5. DRIVE MOTOR
  • 10-6. DEADMAN SWITCH
• 11. Optional Equipment
  • 11-1. LOAD BACKREST
  • 11-2. CASTERS
• 12. Illustrated Parts Breakdown