Claas Tractor Nectis 207 Workshop Service Manual PDF

This service manual includes repair guide, instructions for maintenance, special troubleshooting instructions, diagrams and charts, destined for the serve Claas Tractor Nectis 207.
Workshop manual contains step by step instructions for operation and maintenance of Claas Tractor Nectis, machine data, instructions and manuals.
Repair manual has a very comfortable functions, it is designed to run on a PC. This manual comes in PDF format. To view the information you must have the program Adobe Reader.  Working with the program, you can easily copy, save, and print the information you need. If necessary, you can print pages, pictures, charts, or the entire manual completely.
Electronic maintenance instruction is a system of assistance in the operation and repair of CClaas Tractor Nectis, which allows to detect and resolve problems arising and uncertainties.

CONTENTS:

• A1 – TEST PROCEDURE – INJECTOR INSTRUCTION SHEETS
  • TEST PROCEDURE
  • MEASUREMENT AND CHECKING POINTS
• A2 – INJECTION FEED
  • IDENTIFICATION
  • TORQUE SETTINGS
  • DESCRIPTION
  • CHECKS/ADJUSTMENTS
  • REMOVAL/REFITTING
  • DIAGNOSTICS
• A3 – IVECO ENGINE
  • GENERAL SPECIFICATION
  • LUBRICATION
  • COOLING
  • TURBOCHARGER
  • DIMENSIONS
  • TORQUE SETTINGS
  • CHECKS/ADJUSTMENTS
  • REMOVAL/REFITTING
  • DIAGNOSTICS
• B1 – MECHANICAL PART
  • GENERAL SPECIFICATION
  • DISMANTLING PROCEDURE
  • TIGHTENING TORQUES AND MAIN ADJUSTMENTS
  • TORQUE SETTINGS AND SEALANTS
  • TRANSMISION WITH MECHANICAL CLUTCH
  • TRANSMISSION WITH HYDRAULIC REVERSER AND DOUBLER
  • GEARBOX
• B2 – HYDRAULIC PART
  • PUMP HYDRAULIC SYSTEM
  • SCHEMATIC DIAGRAM OF HYDRAULIC REVERSER AND MECHANICAL DOUBLER
  • BAR LOW PRESSURE SYSTEM WITH CLUTCHLESS REVERSER
  • LOW PRESSURE LUBRICATION SYSTEM FOR CLUTCHLESS REVERSER
  • "INSPECTION RESULTS" SHEET
• B3 – ELECTRONIC COMPONENTS
  • GEARBOX ELECTRONIC CONTROL
  • COMPONENT LAYOUT
  • ELECTRICAL TESTS
  • MEASUREMENT AND CHECK POINTS
  • "INSPECTION RESULTS" SHEET
• C1 – MECHANICAL PART
  • TIGHTENING TORQUES AND MAIN ADJUSTMENTS
  • DRIVE PINION
  • DIFFERENTIAL
  • AXLE TUBES
  • POWER TAKE-OFF (PTO)
  • BRAKES
• C2 – HYDRAULIC PART
  • HYDRAULIC SYSTEM
  • LOW PRESSURE CIRCUIT 18 BAR
  • DIFFERENTIAL LOCK
  • REAR POWER TAKE-OFF
  • BRAKING SYSTEM
  • MEASUREMENT AND CHECK POINTS
  • "INSPECTION RESULTS" SHEET
• C3 – ELECTRONIC COMPONENTS
  • REAR AXLE ELECTRONIC CONTROL
  • COMPONENT LAYOUT
  • ELECTRICAL TESTS
  • MEASUREMENT AND CHECK POINTS
  • "INSPECTION RESULTS" SHEET
• D1 – MECHANICAL PART
  • GENERAL
  • TORQUE SETTINGS AND SEALANTS
  • WHEEL ALIGNMENT
  • REMOVAL/REFITTING OF SUSPENDED FRONT AXLE
  • STEERING ACTUATOR FOR SUSPENDED AXLE
  • STEERING ACTUATOR FOR THE AXIAL AXLE
  • REDUCTION GEAR AND WHEEL HUB FOR "20.09 C" AXLE
  • REDUCTION GEAR AND WHEEL HUB FOR "20.09" AND "20.11" AXLES
  • WHEEL KING PINS AND HUB CARRIER
  • CROWN WHEEL AND PINION AND DIFFERENTIAL
  • 4-WHEEL DRIVE UNIT WITH ELECTRO-HYDRAULIC ENGAGEMENT
  • 4-WHEEL DRIVE UNIT WITH MECHANICAL ENGAGEMENT
• D2 – HYDRAULIC PART
  • HYDRAULIC SYSTEM
  • FRONT AXLE ENGAGEMENT
  • MEASUREMENT AND CHECKING POINTS
  • "INSPECTION RESULTS" SHEET
• D3 – ELECTRONIC COMPONENTS
  • ELECTRONIC CONTROL OF FRONT AXLE
  • COMPONENT LAYOUT
  • ELECTRICAL TESTS
  • MEASUREMENT AND CHECKING POINTS
  • "INSPECTION RESULTS" SHEET
• E1 – COMMON ELEMENTS
  • GEAR PUMPS
  • STEERING UNIT
  • BRAKE VALVE
  • AUXILIARY SPOOL VALVES
  • DUAL SPOOL VALVE
  • LINKAGE SWING ACTION SPOOL VALVE (TRACTOR VF 2-ACTUATOR INSTALLATION)
  • LINKAGE SYSTEM SELECTOR
  • SWING ACTUATOR
  • HYDRAULIC JACK
  • MECHANICAL LINKAGE SPOOL VALVE
  • ELECTRONIC LINKAGE SPOOL VALVE
  • LINKAGE HOUSING
• E2 – PUMP SYSTEM 1
  • DESCRIPTION
  • COMPONENT LAYOUT
  • HYDRAULIC MEASUREMENT AND CHECKING POINTS
  • "HYDRAULIC INSPECTION RESULTS" SHEET
  • HYDRAULIC MEASUREMENT AND CHECKING POINTS
  • "HYDRAULIC INSPECTION RESULTS" SHEET
• E3 – 2-PUMP SYSTEM
  • DESCRIPTION
  • COMPONENT LAYOUT
  • HYDRAULIC MEASUREMENT AND CHECKING POINTS
  • "HYDRAULIC INSPECTION RESULTS" SHEET
  • HYDRAULIC MEASUREMENT AND CHECKING POINTS
  • "HYDRAULIC INSPECTION RESULTS" SHEET
• E4 – 3-PUMP SYSTEM
  • DESCRIPTION
  • COMPONENT LAYOUT
  • HYDRAULIC MEASUREMENT AND CHECKING POINTS
  • "HYDRAULIC INSPECTION RESULTS" SHEET
  • HYDRAULIC MEASUREMENT AND CHECKING POINTS
  • "HYDRAULIC INSPECTION RESULTS" SHEET
• F1 – SCHEMATIC DIAGRAMS
  • ITEM LIST
  • GENERAL WIRING
  • FUSES AND RELAYS
  • EARTHS
  • FUNCTIONS
• F2 – HARNESS AND CONNECTOR PATHS
  • 1. INSTRUMENT PANEL AND TRANSMISSION HARNESS
  • 2. PREHEATING CONTROL HARNESS (OPTION)
  • 3. RADIATOR COWLING HARNESS
  • 4. ENGINE HARNESS
  • 4A. ROTATING BEACON HARNESS (ROLL BAR)
  • 4B. INJECTOR PUMP INTERFACE HARNESS
  • 5. CAB TOP HARNESS
  • 5A. AIR CONDITIONING HARNESS
  • 6. TCE 6 HARNESS
• G1 – INSTRUMENT PANEL
  • DESCRIPTION
  • CHARACTERISTICS
  • REMOVAL/REFITTING
  • MEASUREMENT AND CHECKING POINTS
• G2 – ELECTRONIC LINKAGE TCE 6
  • DESCRIPTION
  • ADJUSTMENTS
  • MEASUREMENT AND CHECKING POINTS
  • RECORD SHEET FOR MEASURED SENSOR AND SWITCH VALUES FOR THE TCE 6 SOLENOID VALVE
• H1 – RAISING THE CAB AND PLATFORM
  • DESCRIPTION OF THE CAB
  • REMOVING THE CAB
  • REFITTING THE CAB
  • REMOVING/REFITTING THE ROOF
  • DESCRIPTION OF THE PLATFORM
  • REMOVAL OF THE PLATFORM
  • REFITTING THE PLATFORM
• H2 – HEATING/AIR CONDITIONING
  • CHARACTERISTICS
  • GENERAL DESCRIPTION
  • DESCRIPTION AND OPERATION
  • SAFETY INSTRUCTIONS
  • GAS CHARGING AND DISCHARGING
  • REMOVAL/REFITTING
  • MEASUREMENT AND CHECK POINTS
  • DIAGNOSTICS