Caterpillar Telehandler TL642D, TL943D, TL1055D, TL1255D Operation & Maintenance Manual PDF

This PDF Operation & Maintenance Manual is designed as an assistant for maintenance, repair, and troubleshooting of the Caterpillar Telehandler TL642D, TL943D, TL1055D, TL1255D Models. An electronic guide is a very important tool for office staff and technical specialists who are involved with the proper use, service, and overhaul. 

The factory file includes general information about service instruction, operating and maintenance section, special instructions for repair and service procedure, service documentation, safety rules, many schemes, diagrams, and illustrations others.

The manual is presented in PDF format, which greatly simplifies its use since it does not require installation (INSTANT DOWNLOAD). To work with the PDF manual, we recommend that you use the Adobe PDF Reader application.

At the top of the page, you can see the link 'Caterpillar pdf manual instant preview'. By clicking on it, you can see what this manual is all about, what quality of pictures and drawings in it. You can also read the list of content that is presented below.

If you have any questions or problems with downloading the file, you can write to us and we will help you.

Note: here are presented for purchase manuals in English, French, Portuguese, Spanish.

Models covered:
TL642D, TL943D,
TL1055D, TL1255D.

Serial numbers:
SN ML800150 to Present, SN MLG00150 to Present
SN MLJ00150 to Present, SN MLD00150 to Present
SN ML500150 to Present, SN MNT00150 to Present
SN ML700150 to Present, SN MYW00150 to Present

Contents:

• Revision Log
• Read This First
  • Operator Qualifications
  • Modifications
  • Other Publications Available
• Section 1 - General Safety Practices
  • 1.1 Hazard Classification System
  • 1.2 General Precautions 
  • 1.3 Operation Safety
  • 1.4 Product Link (if equipped)
• Section 2 - Pre-Operation and Inspection
  • 2.1 Preparation, Inspection, and Maintenance
  • 2.2 Pre-Operation Check and Inspection
  • 2.3 Safety Decals
  • 2.4 Walk-Around Inspection
  • 2.5 Warm-Up and Operational Checks
  • 2.6 Cab
  • 2.7 Enclosed Cab Windows (if equipped)
• Section 3 - Controls and Indicators
  • 3.1 General
  • 3.2 Controls
  • 3.3 Multifunction Display (if equipped)
  • 3.4 Anti Theft Functionality (if enabled)
  • 3.5 Steer Modes
  • 3.6 Operator Seat
  • 3.7 Boom Angle and Extension Indicators
  • 3.8 Reverse Systems (if equipped)
  • 3.9 Rear Axle Stabilization (RAS) System
• Section 4 - Operation
  • 4.1 Engine
  • 4.2 Operating with a Non-Suspended Load
  • 4.3 Operating with a Suspended Load
  • 4.4 Loading and Securing for Transport
• Section 5 - Attachments
  • 5.1 Approved Attachments
  • 5.2 Unapproved Attachments
  • 5.3 JLG Supplied Attachments
  • 5.4 Telehandler/Attachment/Fork Capacity
  • 5.5 Use of the Load Chart
  • 5.6 Attachment Installation
  • 5.7 Adjusting/Moving Forks
  • 5.8 Attachment Operation
• Section 6 - Emergency Procedures
  • 6.1 Towing a Disabled Product
  • 6.2 Emergency Lowering of Boom
  • 6.3 Emergency Exit from Enclosed Cab
• Section 7 - Lubrication and Maintenance
  • 7.1 Introduction
  • 7.2 General Maintenance Instructions
  • 7.3 Service and Maintenance Schedule
  • 7.4 Lubrication Schedules
  • 7.5 Operator Maintenance Instructions
• Section 8 - Additional Checks
  • 8.1 General
  • 8.2 Reverse Sensor System (if equipped)
• Section 9 - Specifications
  • 9.1 Product Specifications
• Index
• Inspection, Maintenance, and Repair Log