Caterpillar Axle TH336, TH337, TH406, TH407, TH414 Disassembly & Assembly Manual PDF

This PDF Disassembly & Assembly Manual provides general directions for accomplishing service and repair procedures of axles of the Caterpillar Telehandlers TH336, TH337, TH406, TH407, TH414 Models. Following the procedures in this manual will help assure safety and equipment reliability.

This pdf guide will provide you with all the information and recommendations that you can easily use when ordering and buying the Caterpillar Axles. The factory file contains deep information about specifications, precautions for field assembly, technical data, assembly procedure, necessary equipment, table of tools for field assembly, assembly, check and maintenance procedures, etc.

Our site gives you the opportunity to review and purchase the assembly/disassembly manual for Caterpillar Telehandlers TH336, TH337, TH406, TH407, TH414 Models.

If you decide to purchase this guide on our website, then within 5-7 minutes you will receive an email with a link to download and further recommendations. If you have questions - write to us and we will answer them.

Models covered:
TH336, TH337,
TH406, TH407,
TH414.

Serial numbers:
S/N TDE00100 & After
S/N TDF00100 & After
S/N TBX00100 & After
S/N TBY00100 & After
S/N TBZ00100 & After

Contents:

• Section 1 - Safety Practices
  • 1.1 Introduction
  • 1.2 Disclaimer
  • 1.3 Operation & Maintenance Manual
  • 1.4 Do Not Operate Tags
  • 1.5 Safety Information
  • 1.6 Safety Instructions
  • 1.7 Safety Decals
• Section 2 - General Information and Specifications
  • 2.1 General
  • 2.2 Recommendations for Repair Operations
  • 2.3 Product Identification
  • 2.4 Measurements
  • 2.5 General Description
  • 2.6 Technical Features
  • 2.7 Component Specifications
  • 2.8 Tightening Torques and Sealants
• Section 3 - Troubleshooting and Maintenance
  • 3.1 Troubleshooting
  • 3.2 Oil Change and Service Checks
  • 3.3 Service Schedule
  • 3.4 Grease in Assembly
• Section 4 - Disassembly/Assembly/Adjustment
  • 4.1 Steering Cylinder
  • 4.2 Epicyclic reduction gear group
  • 4.3 Wheel Hub Group
  • 4.4 Parking Brake Group 
  • 4.5 Flange Group
  • 4.6 Trunnions Group
  • 4.7 Brake Group
  • 4.8 Axle Beam Group
  • 4.9 Differential Support Group 
  • 4.10 Differential Group Limited Slip
  • 4.11 Differential Group - Open
  • 4.12 Pinion Group
  • 4.13 Toe-in/steering angle
  • 4.14 Testing After Assembly
• Section 5 - Special Tools
  • 5.1 Tool Usage