Case Steiger Tractor STX375 and STX440 PDF Operators manual

This manual contains important information about the safe operation, setup, and maintenance of your tractor Case the Steiger STX series. Refer to the detailed index at the end of this manual to find specific items specific to your tractor.

These tractors, with standard equipment and approved attachments, are designed for use in agriculture, land grading, and related operations. Use this manual as a guide to keeping your tractor in a reliable working machine as long as it works properly. Read this manual before starting the engine or operating the tractor.

The factory file is in PDF format, which was written in English and has 211 reading pages. To read and print information, you need to install Adobe PDF Reader. If you have any questions - write to us about them.

Models:
STX375
STX440

CONTENTS:

• 1.TO THE OWNER
  • MANUAL STORAGE COMPARTMENT
  • STX SERIES STEIGER TRACTORS
  • PRODUCT IDENTIFICATION AND SERIAL NUMBERS
• 2.SAFETY/DECALS
  • SAFETY
  • SAFETY DECALS
  • STEERING CYLINDER LOCKING BLOCKS
  • MOUNTING AND DISMOUNTING THE TRACTOR
  • ROLL OVER PROTECTIVE STRUCTURE (ROPS)
  • CLEANING CAB WINDOWS
  • RH SERVICE WINDOW
  • IINTERIOR REAR VIEW MIRROR
  • SEAT BELT
  • TRACTOR WARNING LAMPS AND SMV SYMBOL
  • IMPLEMENT WARNING LAMPS AND SMV SYMBOL
  • SAFETY CHAIN
• 3.OPERATING CONTROLS
  • TRACTOR ACCESS
  • CAB DOOR CONTROLS
  • OPERATORS SEAT WITH AIR SUSPENSION
  • STEERING COLUMN CONTROLS
  • STEERING COLUMN ADJUSTMENT
  • FOOT PEDALS
  • CENTER CONSOLE CONTROLS
  • RH ARM REST CONTROL CONSOLE
  • REMOTE FUNCTION CONTROL
  • ARM REST CONTROL CONSOLE ADJUSTMENT
  • UPPER CONSOLE CONTROLS
  • AUTOMATIC CLIMATE CONTROL HVAC SYSTEM (IF EQUIPPED)
  • AUTOMATIC CLIMATE CONTROL OPERATION
  • DEFOG CONTROL OPERATION
  • TROUBLESHOOTING THE HVAC CONTROL SYSTEM
  • POWER MIRROR CONTROL (IF EQUIPPED)
  • FRONT SUN SHADE (IF EQUIPPED)
  • REAR SUN SHADE (IF EQUIPPED)
  • RH SIDE SERVICE WINDOW LATCH
  • OUTSIDE EXTENDIBLE MIRRORS (IF EQUIPPED)
  • ELECTRICAL FUSES AND RELAY LOCATION
  • LH CONSOLE
  • MANUAL HYDRAULIC FLOW CONTROLS (IF EQUIPPED)
• 4.INSTRUMENTATION
  • ROPS POST INSTRUMENT CLUSTER
  • TIRE AVERAGE ROLLING RADIUS CHART
  • INSTRUMENT PANEL BACKLIGHT INTENSITY
  • CRITICAL WARNING DISPLAYS
  • NON-CRITICAL WARNING DISPLAYS
  • DIAGNOSTIC WARNING DISPLAYS
  • INFORMATION WARNING DISPLAYS
  • PERFORMANCE MONITOR DISPLAY (IF EQUIPPED)
• 5.OPERATING INSTRUCTIONS
  • BEFORE STARTING THE ENGINE
  • RUN-IN PROCEDURE
  • WHEEL BOLTS AND NUTS
  • ENGINE OVERSPEED
  • SEAT BELT
  • NORMAL ENGINE STARTING PROCEDURE
  • ENGINE STARTING USING ETHER STARTING FLUID
  • STOPPING THE ENGINE
  • COLD TEMPERATURE OPERATION
  • ENGINE COOLANT HEATER (IF EQUIPPED)
  • ETHER START AID (IF EQUIPPED)
  • TRANSMISSION OIL HEAT MAINTAINER (IF EQUIPPED)
  • TOWING THE TRACTOR
  • TRANSPORTING THE TRACTOR
  • PRE-CONDITIONING NEW TRACKS (BELTS)
  • POWERSHIFT TRANSMISSION OPERATION
  • DIFFERENTIAL LOCK (IF EQUIPPED)
• 6.FIELD OPERATION
  • POWER TAKEOFF (IF EQUIPPED)
  • OPERATING THE POWER TAKEOFF (PTO)
  • STANDARD DRAWBAR
  • STANDARD DRAWBAR HAMMERSTRAP PREPARATION
  • HEAVY DUTY DRAWBAR (IF EQUIPPED)
  • THREE POINT HITCH PREPARATION
  • HITCH COUPLER - CATEGORY III OR IV-N
  • REAR REMOTE HITCH SWITCH (IF EQUIPPED)
  • HITCH OPERATION
  • REMOTE HYDRAULICS
  • LOW PRESSURE RETURN CIRCUIT
  • HYDRAULIC POWER BEYOND
  • AUXILIARY AUTO MODE SWITCH (IF EQUIPPED)
  • AUXILIARY IMPLEMENT POWER CONNECTIONS
• 7.IN FIELD PERFORMANCE
  • TRACTOR BALLAST
  • SUITCASE WEIGHT INSTALLATION DIAGRAM
  • WHEEL WEIGHTS
  • TIRE AND RIM SERVICE
  • TIRE PRESSURE FOR MAXIMUM TIRE LOAD AT RATED INFLATION
  • WHEEL BOLT TORQUES
  • WHEEL OFFSET DIRECTION CHANGE
  • TAPERED BUSHING HUB
  • TRACK DRIVE WHEEL-IDLER BOLT TORQUES
  • WHEEL TREAD SETTING - SINGLES (STX 375)
  • WHEEL TREAD SETTING - SINGLES (STX375HD/440)
  • WHEEL TREAD SETTING - DUALS
  • TRIPLE WHEEL TREAD SETTING
  • SCRAPER OPERATING PROCEDURES
• 8.LUBRICATION/FILTERS/FLUIDS/MAINTENANCE
  • LUBRICATION AND MAINTENANCE
  • PLASTIC AND RESIN PARTS
  • LUBRICANTS AND CAPACITIES
  • ENGINE LUBRICATION
  • GRILLE AND HOOD ACCESS
  • ACCESS TO BATTERIES AND HYDRAULIC FILTER
  • LUBRICATION AND MAINTENANCE CHART
  • ENGINE HOURMETER
  • SCA TEST
  • BATTERY SERVICE
  • AIR INDUCTION SYSTEM
  • COOLANT SYSTEM FILTER/CONDITIONER
  • PRESSURE COOLING SYSTEM
  • SCA SERVICE REQUIREMENTS
  • SEAT BELT INSPECTION AND MAINTENANCE
  • INSPECTION OF TRACKS AND UNDERCARRIAGE
  • TRACK ROTATION
  • TRACK (BELT) TENSION RELEASE
  • TRACK (BELT) ALIGNMENT
• 9.ELECTRICAL SYSTEM
  • ELECTRICAL SPECIFICATIONS
  • GENERAL SERVICE INFORMATION
  • GENERAL SPECIFICATIONS
• 10.GENERAL SPECIFICATIONS
  • TRACTOR WEIGHTS
  • APPROXIMATE TRAVEL SPEEDS (MPH)
  • APPROXIMATE TRAVEL SPEEDS (KPH)
  • APPROXIMATE OVERALL MEASUREMENTS
  • STX 375 AND STX 440 WHEEL TRACTORS
  • APPROXIMATE OVERALL MEASUREMENTS
  • STX 375 AND STX 440 QUADTRAC
• DETAIL INDEX