Case RBX452, RBX462, RBX552, RBX562 Round Baler Set of Manuals

Complete information for comfort use and repair Case round balers RB 454, RB 464, RB 554, RB564 is presented on our site and includes several files that complement each other.

These manuals provide the appropriate service methods, correct repair procedures are essential for the safe, reliable operation of Case equipment, as well as the personal safety of the individual performing the repair. The set of manual is divided into sections which are subdivided into chapters. Each chapter contains information on general operating principles, detailed inspection, overhaul and, where applicable, specific troubleshooting, special tools, and specifications (below you can see a detailed list of contents). Use this manual for complete operation, adjustment, and maintenance information.

Case set of manuals provides troubleshooting and technical information needed to properly service the equipment, such as the round balers RB452, RB462, RB552, RB562. Following these instructions will ensure the safe, efficient, and timely completion of the service and repair.  Also in the set of manuals are part diagrams, information about faults and damage with a step-by-step description of how to eliminate them.

The set of manuals in a Zip archive with PDF files. We recommend using the program Adobe PDF Reader. If necessary, you can print the entire document or selected partitions.

If you still have questions on the use of this set of manuals - contact our managers, with the purchase of this set, we provide after-sales service.

Models:
RB452
RB462
RB552
RB562

General Contents:

• SECTION 00
  • Introduction
  • Precautionary statements
  • Safety
  • Fluid Safety
  • Safety Decals
  • Information Decals
  • Torques and Adjustments
  • Technical Information
  • Minimum Hardware Tightening torques
  • Retaining compounds and sealants
  • Standard torque data for hydraulic tubes and fittings
  • Recommended lubricants
  • Roller chains
  • Conversion Charts
  • Ecology and the environment
  • Baler components
  • Power flow baler with stuffer
  • Power flow baler with the rotor
  • Driveline components baler with a standard pickup
  • Driveline components baler with a stuffer and wide pickup
  • Driveline components baler with the rotor and wide pickup
  • Specifications
  • Storage and seasonal preparation
• SECTION 31 - IMPLEMENT DRIVELINE
  • Chapter 1 - PTO Driveline
  • Chapter 2 - Gearbox
  • Chapter 3 - Clutches
  • Chapter 4 - Drives
• SECTION 35 - HYDRAULICS
  • Chapter 1 - Tailgate Lift System
  • Chapter 2 - Belt Tension System
  • Chapter 3 - Feeding - Pickup Lift Cylinder/Rotor Knives and Reverse Cylinders
  • Chapter 4 - Lubrication - Grease lines and Oiler
• SECTION 39 - FRAME
  • Description Page
  • Overhaul
  • Tailgate (RBX462 & RBX562)
  • Tailgate (RBX452 & RBX552)
• SECTION 44 - AXLES AND WHEELS
  • Chapter 1 - Axles and Wheels
  • Description Page
  • Specifications
  • Special Tools
  • Description of Operation
  • Overhaul
  • Axle
  • Adjustment
  • Tire Pressure
  • Wheel Torques
  • Wheel Bearings
  • Inspection
• SECTION 55 - ELECTRICAL SYSTEMS
  • Chapter 1 - General Information
  • Chapter 2 - Harness and Connectors
  • Chapter 3 - Components - Operation, Location, and Testing
  • Chapter 4 - Net-Twine Wrapper Electrical System, Troubleshooting -Component
  • Chapter 5 - Electric /Twine Wrapper - Electrical System Troubleshooting -Component Adjustment and Calibration
  • Chapter 6 - Lights
• SECTION 60 - PRODUCT FEEDING
  • Chapter 1 - Standard Pickup
  • Description of Operation
  • Overhaul
  • Standard Pickup
  • Tines and Guards - Standard Pickup
  • Cam Bearing - Standard Pickup
  • Cam Track - Standard Pickup
  • Tine Bar and Bearings - Standard Pickup
  • Reel Disc and Shaft - Standard Pickup
  • Chapter 2 - Wide Pickup with Stuffer - 1.5 M
  • Chapter 3 - Wide Pickup with Stuffer - 1.8 M and 2.1 M
  • Chapter 4 - Wide Pickup with Rotor - 2.1 M
• SECTION 62 - PRESSING
  • Chapter 1 - Take up Arm
  • Chapter 2 - Belts
  • Chapter 3 - Starter Roll
  • Chapter 4 - Stationary Roll
  • Chapter 5 - Floor Roll
  • Chapter 6 - Belt Rolls
  • Chapter 7 - Sledge Assembly
• SECTION 68 - WRAPPING
  • Chapter 1 - Net Wrapper Mechanical System
  • Chapter 2 - Twine Wrapper Mechanical System
• SECTION 70 - EJECTION
  • Chapter 1 - Bale Ejector
• SECTION 90 - SHIELDING
  • Chapter 1 - Side Doors
  • Chapter 2 - Net and Twine Boxes