Case Quantum 65V 75V 85V 95V 105V PDF Operatots manuals

The Case operating instructions contain all technical information that you need to use, operate and repair the tractor Case Quantum V-Series. Also, the manual contains basic safety instructions and many other data and information - see below the contents.

This set of manuals is intended to alert the tractor operator to the dangers that may arise during normal tractor operation. He shows you how to avoid these dangers from the start and how to react if they arise.

This operating manual is a PDF file. We recommend using Adobe Acrobat Reader to ensure that all images/graphics display correctly. Acrobat Reader allows anyone to view, navigate, and print Adobe Portable Document Format (PDF) documents with one click.

Models:
65V
75V
85V
95V
105V

Contents:

• 1. GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Metric and imperial units abbreviations
  • Identification plates
  • Approval data plate
  • Machine orientation
  • Component Identification
  • EC Declaration of Conformity
• 2. SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules – Maintenance
  • Safety rules - Wheels and tires
  • Safety rules – Explosions and fires
  • Safety rules - Fire extinguisher
  • Safety rules – Battery
  • Safety rules - Passenger seat
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules – Mounting and dismounting the machine
  • Safety rules - Lifting and overhead loads
  • Ecology and the environment
  • Commission directive 2010/52/EU
  • Noise level
  • Vibration levels
  • Machine stability
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Emergency exit
  • Safety signs
• 3. CONTROLS AND INSTRUMENTS
  • ACCESS TO OPERATOR'S PLATFORM
  • OPERATOR'S SEAT
  • FORWARD CONTROLS
  • LEFT-HAND SIDE CONTROLS
  • RIGHT-HAND SIDE CONTROLS
  • OVERHEAD CONTROLS
  • EXTERIOR CONTROLS
  • DISPLAY SETTINGS
• 4. OPERATING INSTRUCTIONS
  • COMMISSIONING THE UNIT
  • STARTING THE UNIT
  • STOPPING THE UNIT
  • MOVING THE UNIT
• 5. TRANSPORT OPERATIONS
  • ROAD TRANSPORT
  • RECOVERY TRANSPORT
• 6. WORKING OPERATIONS
  • FOUR WHEEL DRIVE (4WD)
  • DIFFERENTIAL LOCK
  • REMOTE VALVES
  • POWER TAKE OFF (PTO)
  • HYDRAULIC LIFT
  • REAR THREE-POINT HITCH
  • REAR TOW HITCH
  • WHEELS AND TIRES
  • WHEEL TRACK ADJUSTMENT
  • BALLAST
• 7. MAINTENANCE
  • GENERAL INFORMATION
  • MAINTENANCE CHART
  • AS REQUIRED
  • AT WARNING MESSAGE DISPLAY
  • EVERY 10 HOURS OR EACH DAY
  • After first 50 hours
  • EVERY 50 HOURS
  • EVERY 100 HOURS
  • EVERY 300 HOURS
  • EVERY 500 HOURS
  • EVERY 600 HOURS
  • EVERY 1200 HOURS OR ANNUALLY
  • EVERY 1200 HOURS OR EVERY 2 YEARS
  • EVERY 3600 HOURS OR EVERY 4 YEARS
  • ELECTRICAL SYSTEM
  • CALIBRATIONS
• 8. TROUBLESHOOTING
  • FAULT CODE RESOLUTION
  • ALARM(S)
• 9. SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on drawbar
  • Maximum permitted loads on towing hitch
  • Additional equipment attachment points
  • Speed table for 16x16 gearbox
  • Speed table for 16x16 gearbox
  • Speed table for 28x16 gearbox
  • Speed table for 32x16 gearbox
  • Speed table for 32x16 gearbox
  • Speed table for 32x16 gearbox
  • Speed table 44x16 gearbox
  • Consumables
  • Capacities
  • Technical data
• 10. ACCESSORIES
  • Cab radio set - Operating
  • Hydraulic valve for trailer brakes Not available on all markets