Case L103/104/105/106/107/108/L795 Front Loader Operators Manual

The operator's manual contains the necessary information for safe and efficient use of the front loaders next models:

L103
L104
L105
L106
L107
L108
L795

In this manual, you will see repair procedures, troubleshooting, and information the solve any problems with the Case farm loader. For your comfort, this manual is organized into several groups, such as service, special instructions for repair, safety information, operation instructions, troubleshooting (see below the Contents). When you click on the title of the section - direct transition to the page.

The manual is supplied in PDF format and for the correct display of all diagrams and information, we advise you to install the Adobe PDF Reader program. Make sure you understand the contents of this manual and use it to full effect at every opportunity. You can contact us if you have any questions or need our help. Our managers will be happy to help you.

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Machine orientation
  • Product identification
  • Definition
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules
  • Ecology and the environment
  • Safety signs
• 3 OPERATING INSTRUCTIONS
  • Commissioning the unit
  • Machine preparation
  • Hydraulic controls
  • Installing the loader
  • Removing the loader
  • Re-installing the loader
  • Check list
• 4 WORKING OPERATIONS
  • General information
  • Operating the loader
  • Soft-ride suspension-Optional
  • Remove bucket or attachment (SSL style)
  • Install bucket or attachment (SSL style)
  • Remove bucket or attachment (EURO Style)
  • Install bucket or attachment (EURO style)
  • Remove bucket or attachment with hydraulic lock (EURO Style)-Optional
  • Install bucket or attachment with hydraulic lock (EURO style)-Optional
  • Operation with grapple fork attachment
  • Operation with H.D. bale grip
  • Operation with bale spike attachment
• 5 MAINTENANCE
  • General information
  • Note to the owner
  • Torque - Minimum tightening torques for normal assembly - Minimum Tightening Torques
  • for Normal Assembly
  • Torque - Standard torque data for hydraulics - Standard torque data for hydraulics
  • Replacing the WEO plug-in coupling
  • Storage
  • Consumables
  • Maintenance planning
  • Maintenance chart
  • Every 8 hours or daily
  • Pivot points - Grease
  • After the first 10 hours
  • Loader subframe torque-Check
  • Every 50 hours
  • Loader subframe torque-Check
  • Check the hydraulic system for leaks
• 6 TROUBLESHOOTING
  • Symptom(s)
  • Basic instructions
  • Loader attachment - Troubleshooting
• 7 SPECIFICATIONS
  • Loader specifications
• 8 ACCESSORIES
  • Loader attachments
• 9 FORMS AND DECLARATIONS
  • Predelivery report - Dealer copy
  • Predelivery report - Owner copy