Case Farmall 90C, 100C, 110C, 120C tractors pdf Operator’s manuals

This set of manuals contains technical information about repair and service, detailed circuits and diagrams, maintenance and troubleshooting instructions, special instructions for service, a workshop manual, a full description of repair and service procedures for Case tractors.

The electronic manuals help to quickly and easily perform repair procedures, maintenance, troubleshoot them and to solve problems, resolve any problems, find information about the equipment, and many other.

These manuals come in PDF format, all pages are printable and readable. We recommend using Adobe PDF Reader, to be sure all images/graphics will display correctly.

Models:
Farmall 90C
Farmall 100C
Farmall 110C
Farmall 120C

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Proposition 65
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Metric and imperial units abbreviations
  • Identification plates
  • Operator's manual storage on the machine
  • Machine orientation
  • Selective Catalytic Reduction (SCR) system
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules – Maintenance
  • Safety rules - Wheels and tires
  • Safety rules – Explosions and fires
  • Safety rules – Battery
  • Safety rules - Passenger seat
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules – Mounting and dismounting the machine
  • Safety rules - Lifting and overhead loads
  • Safety rules - Front end loader
  • Ecology and the environment
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Safety signs
• 3 CONTROLS AND INSTRUMENTS
  • Access to operator's platform
  • Operator's seat
  • Instructional seat
  • Forward controls
  • Left-hand side controls
  • Right-hand side controls
  • Exterior controls
  • Display
  • Warning and advisory symbols
• 4 OPERATING INSTRUCTIONS
  • Commissioning the unit
  • Starting the unit
  • Stopping the unit
  • Moving the unit
• 5 TRANSPORT OPERATIONS
  • Road transport
  • Recovery transport
• 6 WORKING OPERATIONS
  • Transmission
  • Four-Wheel Drive (4WD)
  • Differential lock system
  • Remote control valves
  • Rear Power Take-Off (PTO)
  • Rear hydraulic lift
  • Rear three-point hitch
  • Front loader
  • Towbar
  • Wheels and tires
  • Track adjustment
  • Ballasting
• 7 MAINTENANCE
  • General information
  • Maintenance planning
  • As required
  • AT WARNING MESSAGE DISPLAY
  • Every 10 hours or daily
  • Initial 50 hours
  • Every 50 hours
  • Every 100 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 1200 hours or two years
  • Every 3600 hours or two years
  • Every 3600 hours or four years
  • Electrical system
  • Fuse and relay locations
  • Storage
  • Calibration
• 8 TROUBLESHOOTING
  • Fault code resolution
  • Alarm(s)
  • Symptom(s)
• 9 SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on drawbar
  • Additional equipment attachment points
  • Speed table for 8 x 8 gearbox
  • Speed table for 12 x 12 gearbox
  • Speed table for 20 x 20 gearbox
  • Speed table for 24 x 24 gearbox
  • Speed table for 40 x 40 gearbox
  • Consumables
  • Capacities
  • Technical data
  • Loader specifications
• 10 ACCESSORIES
  • Radio
  • Single piece ballast
  • Coolant immersion heater (where fitted)