CASE Farmall 85U, 95U, 105U PDF Operator’s manual
[09/2014]This service manual in PDF format contains the necessary technical data regarding the maintenance and repair of Case tractors:
Farmall 85U
Farmall 95U
Farmall 105U
By purchasing this CASE service manual, you gain confidence in the operation of your equipment, since the necessary and useful information is always at hand.
To check or repair your tractor, we recommend that you read this manual carefully and use all the information for each maintenance procedure. We hope this guide will help you maintain a high level of performance and reliability for your equipment. Choose reliable, factory, and genuine technical information for your equipment - rely on the experts and the CASE manual will help you with it.
On our website, you can view and purchase repair instructions for CASE Farmall U-series tractors. If you choose to purchase this manual from our website, you will receive an email within 5-7 minutes with a download link and further recommendations. If you have any questions, write to us and we will answer them.
Contents:
- 1 GENERAL INFORMATION
- Note to the Owner
- Proposition 65
- Noise level
- Electro-magnetic interference (EMC)
- International symbols
- Introduction
- Tractor intended use
- Ecology and the Environment
- Identification plates
- Approval data plate
- Component Identification
- 2 SAFETY INFORMATION
- Safety rules and signal word definitions
- Safety information
- Air conditioning safety regulations
- Roll over protective structure (ROPS)
- Personal protective equipment (PPE)
- Tractor jacking points
- Hazardous chemicals
- Burn prevention
- Getting in and out of the machine
- Emergency exit
- Safety signs
- 3 CONTROLS AND INSTRUMENTS
- ACCESS TO OPERATOR'S PLATFORM
- OPERATOR'S SEAT
- FORWARD CONTROLS
- RIGHT-HAND SIDE CONTROLS
- REARWARD CONTROLS
- EXTERIOR CONTROLS
- DISPLAY SETTINGS
- TRANSMISSION
- 4 OPERATING INSTRUCTIONS
- COMMISSIONING THE UNIT
- STARTING THE UNIT
- STOPPING THE UNIT
- 5 TRANSPORT OPERATIONS
- RECOVERY TRANSPORT
- 6 WORKING OPERATIONS
- 2WD or 4WD
- DIFFERENTIAL LOCK
- REMOTE VALVES
- POWER TAKE OFF (PTO)
- HYDRAULIC LIFT
- THREE-POINT LINKAGE
- TOWBAR
- REAR TOW HITCH
- MAXIMUM PERMITTED LOADS
- WHEELS AND TIRES
- WHEEL TRACK ADJUSTMENT
- BALLAST
- 7 MAINTENANCE
- GENERAL INFORMATION
- MAINTENANCE CHART
- As required
- At warning message display
- Every 10 hours or daily
- Every 50 hours
- Every 100 hours
- Every 300 hours
- Every 600 hours
- Every 1200 hours or annually
- Every 1200 hours or two years
- 1800 hours Service
- EVERY 3600 HOURS OR EVERY 4 YEARS
- STORAGE
- General Maintenance
- FLUIDS AND LUBRICANTS
- 8 TROUBLESHOOTING
- FAULT CODE RESOLUTION
- ALARM(S)
- 9 SPECIFICATIONS
- Technical data
- 10 ACCESSORIES
- Joystick for control valves
Screenshots for CASE Farmall 85U, 95U, 105U PDF Operator’s manual:
Our company provides for sale original spare part catalogs, workshop manuals, diagnostic software for all models of engines, cars, trucks, buses, forklifts, tractors, harvesters, cranes, buldozers, generators, construction and agricultural machines, motorcycles. To purchase a catalog online, please add the product to your cart, fill in the contact form online. Our managers proceed your order the same day.
Related products for CASE Farmall 85U, 95U, 105U PDF Operator’s manual:
![]() eTimGo AGCE for CNH EST 2025 all brands OFFLINE
eTimGo AGCE for CNH EST 05/2025 all brands OFFLINE. Manuals, electrical bulletin diagrams, and diagnostic procedures are provided, including some spare parts catalogs.
1200$
[05/2025]
|
New Holland Electronic Service Tool CNH EST 9.13 [2026] Engineering Diagnostic Software
The dealer software Electronic Service Tools CNH EST 9.13 update 3 (ex v9.3, v9.4, v9.5, 9.6, 9.7) with the highest engineering access Level available for download or shipping worldwide with online support!
250$
[01/2026]
|
Original CNH DPA5 Diagnostic Service Tool Adapter Cable Kit + CNH EST 9.12
The Case, New Holland (CNH) DPA5 adapter kit includes all the cables. This is a genuine CNH DPA5 kit. Include CNH 9.12 Engineering Software 2025
1699$
[2025]
|
CNH Display Codes for the Paid Features 2023 v1.1
The app generates codes for CNH displays to unlock paid features. Codes are entered through the display
3999$
[2024]
|





