Case Farmall 85C, 95C, 105C tractors PDF Operation manuals
[2012-2013]This set of PDF Service Manuals has been designed to provide maximum performance, efficiency, and ease of use and operation for these CASE tractors.
Farmall 85C
Farmall 95C
Farmall 105C
The manuals contain detailed information on maintenance, instructions for installation or assembly, maintenance and repair of tractors, safety measures that must be observed during operation. Also included in the technical manuals are many images and diagrams, which indicate specific elements of the tractor, as well as other information on repair.
On our website, you can view and purchase a manual for Case Farmall A-series models in pdf format.
If you choose to purchase this manual from our website, you will receive an email within 5-7 minutes with a download link and further recommendations. If you have any questions, write to us and we will answer them.
Contents:
- 1 GENERAL INFORMATION
- Note to the Owner
- Proposition 65
- Electro-magnetic interference (EMC)
- International symbols
- Introduction
- Operator's manual storage
- Tractor intended use
- Ecology and the Environment
- Identification plates
- Component Identification
- 2 SAFETY INFORMATION
- Safety rules and signal word definitions
- Safety information
- Air conditioning safety regulations
- Cab guard
- Machine stability
- Personal protective equipment (PPE)
- Tractor jacking points
- Hazardous chemicals
- Burn prevention
- Fire or explosion prevention
- Getting in and out of the machine
- Emergency exit
- Safety signs
- 3 CONTROLS/INSTRUMENTS
- ACCESS TO OPERATOR'S PLATFORM
- OPERATOR'S SEAT
- INSTRUCTOR'S SEAT
- FORWARD CONTROLS
- LEFT-HAND SIDE CONTROLS
- RIGHT-HAND SIDE CONTROLS
- EXTERIOR CONTROLS
- DISPLAY SETTINGS
- 4 OPERATING INSTRUCTIONS
- STARTING THE UNIT
- STOPPING THE UNIT
- MOVING THE UNIT
- 5 TRANSPORT OPERATIONS
- ROAD TRANSPORT
- RECOVERY TRANSPORT
- 6 WORKING OPERATIONS
- FOUR WHEEL DRIVE (4WD)
- DIFFERENTIAL LOCK
- REAR POWER TAKE-OFF (PTO)
- REAR HYDRAULIC LIFT
- REAR 3-POINT HITCH
- TOWBAR
- WHEELS AND TIRES
- WHEEL TRACK ADJUSTMENT
- BALLAST
- 7 MAINTENANCE
- GENERAL INFORMATION
- MAINTENANCE CHART
- As required
- AT WARNING MESSAGE DISPLAY
- Every 10 hours or daily
- Every 50 hours
- Every 100 hours
- Every 300 hours
- Every 600 hours
- Every 1200 hours or annually
- Every 1200 hours or two years
- 1800 hours Service
- Every 3000 hours
- ELECTRICAL SYSTEM
- STORAGE
- CALIBRATION
- 8 TROUBLESHOOTING
- FAULT CODE RESOLUTION
- ALARM(S)
- SYMPTOM(S)
- 9 SPECIFICATIONS
- Dimensions and weights
- Maximum permitted loads on front and rear axle
- Maximum permitted loads on drawbar
- Technical data
- 10 ACCESSORIES
- Radio
- Joystick and Electric Hydraulic (EH) control - Operating
- Front loader and bucket - Operating
Screenshots for Case Farmall 85C, 95C, 105C tractors PDF Operation manuals:
Our company provides for sale original spare part catalogs, workshop manuals, diagnostic software for all models of engines, cars, trucks, buses, forklifts, tractors, harvesters, cranes, buldozers, generators, construction and agricultural machines, motorcycles. To purchase a catalog online, please add the product to your cart, fill in the contact form online. Our managers proceed your order the same day.
Related products for Case Farmall 85C, 95C, 105C tractors PDF Operation manuals:
![]() eTimGo AGCE for CNH EST 2025 all brands OFFLINE
eTimGo AGCE for CNH EST 05/2025 all brands OFFLINE. Manuals, electrical bulletin diagrams, and diagnostic procedures are provided, including some spare parts catalogs.
1200$
[05/2025]
|
New Holland Electronic Service Tool CNH EST 9.13 [2026] Engineering Diagnostic Software
The dealer software Electronic Service Tools CNH EST 9.13 update 3 (ex v9.3, v9.4, v9.5, 9.6, 9.7) with the highest engineering access Level available for download or shipping worldwide with online support!
250$
[01/2026]
|
Original CNH DPA5 Diagnostic Service Tool Adapter Cable Kit + CNH EST 9.12
The Case, New Holland (CNH) DPA5 adapter kit includes all the cables. This is a genuine CNH DPA5 kit. Include CNH 9.12 Engineering Software 2025
1699$
[2025]
|
CNH Display Codes for the Paid Features 2023 v1.1
The app generates codes for CNH displays to unlock paid features. Codes are entered through the display
3999$
[2024]
|





