CASE Farmall 75U, 85U, 95U, 105U, 115U PDF Operator’s manual

We present to your attention the instructions for working with the CASE FARMALL U-series tractor. This factory information is divided into several chapters. Each chapter contains important information about general tractor operation, troubleshooting information, special tools, and specifications (see Table of Contents below).

This manual includes detailed illustrations, part diagrams, step-by-step instructions, specifications, maintenance intervals, overhaul instructions, etc.

You can view this manual in pdf format using the screenshots and content list provided in the manual description. You can also click on the link "Instant preview of the CASE manual pdf" and view the pages of this manual.

The purchase of this service manual is very simple and quick: you just need to click the Buy Now button and follow the further instructions. After paying for the pdf instructions, you will receive a download link. You download a PDF document that works with applications such as Adobe Acrobat Reader, Foxit Reader, etc. For your convenience, you can print the manual, use it as a service reference, and store it in the glove compartment.

Models:
Farmall 75U
Farmall 85U
Farmall 95U
Farmall 105U
Farmall 115U

CONTENTS:

• SECTION 1 - GENERAL INFORMATION AND SAFETY
  • NOTICE TO USER
  • GENERAL GUIDELINES
  • CLEANING THE TRACTOR
  • SAFETY
  • SERVICE AFTER THE FIRST 50 HOURS OF WORK
  • SERVICE PARTS
  • WARRANTY
  • TRACTOR IDENTIFICATION
  • IMPORTANT ECOLOGICAL CONSIDERATIONS
  • RECOMMENDATIONS
  • PRECAUTIONARY STATEMENTS
  • GENERAL PRECAUTIONS
  • OPERATOR PROTECTIVE STRUCTURE
  • WORKING SAFELY
  • STARTING THE TRACTOR
  • USING THE TRACTOR
  • TOWING AND TRANSPORT
  • USING IMPLEMENTS AND AGRICULTURAL MACHINERY
  • STOPPING THE TRACTOR
  • SERVICING THE TRACTOR
  • SAFETY DECALS
  • COMPONENT IDENTIFICATION
  • STANDARDIZED SYMBOLS
• SECTION 2 - GENERAL INFORMATION, CONTROLS AND INSTRUMENTS
  • INTRODUCTION
  • INDICATOR AND WARNING LIGHTS
  • ANALOG/DIGITAL INSTRUMENT PANEL
  • ADVISORY DISPLAYS AND INFORMATION
  • OPERATING CONTROLS
  • OPERATOR’S SEAT
  • CAB
  • AIR CONDITIONED CAB
  • TRANSMISSION WITH RANGE GEAR AND SHUTTLE
  • 30/40 KM/H (19/25 MPH) - (12F + 12R - SYNCHRO SHUTTLE)
  • TRANSMISSION WITH RANGE GEAR AND HYDRAULIC POWER SHUTTLE
  • 30/40 KM/H (19/25 MPH) - (12F + 12R - POWER SHUTTLE)
  • TRANSMISSION WITH CREEPER AND SHUTTLE
  • 30/40 KM/H (19/25 MPH) - (20F + 12R - SYNCHRO SHUTTLE)
  • TRANSMISSION WITH CREEPER AND POWER SHUTTLE
  • 30/40 KM/H (19/25 MPH) - (20F + 20R - POWER SHUTTLE)
  • TRANSMISSION WITH ELECTRO-HYDRAULIC DUAL COMMAND
  • (2 SPEED POWER SHIFT) AND POWER--SHUTTLE 30/40 KM/H (19/25 MPH) - (24F + 24R)
  • TRANSMISSION WITH ELECTRO-HYDRAULIC DUAL COMMAND
  • (2 SPEED POWER SHIFT), POWER-SHUTTLE AND CLUTCH 30/40 KM/H (19/25 MPH) (24F + 24R)
  • FAULT CODES DESCRIPTION
• SECTION 3 - FIELD OPERATION
  • FIELD OPERATION
  • RUNNING-IN PROCEDURE
  • STARTING AND STOPPING
  • TOWING THE TRACTOR
  • TRANSPORTING THE TRACTOR
  • ELECTRO-HYDRAULICALLY OPERATED FOUR-WHEEL DRIVE
  • USING FOUR-WHEEL DRIVE
  • REAR DIFFERENTIAL LOCK (MECHANICALLY CONTROLLED - STANDARD MODELS)
  • FRONT AND REAR DIFFERENTIAL LOCK
  • (WITH ELECTRO-HYDRAULIC CONTROLLED - 4WD MODELS AT 40 KM/H (25 MPH)
  • BRAKES
  • TRANSMISSION CLUTCH PEDAL
  • FOOT THROTTLE
  • HAND THROTTLE
  • POWER TAKE-OFF
  • HYDRAULIC LIFT
  • ELECTRONICALLY CONTROLLED HYDRAULIC LIFT
  • THREE-POINT LINKAGE
  • IMPLEMENT LINKAGE POINTS
  • REMOTE AUXILIARY CONTROL VALVES (STANDARD MODELS)
  • REMOTE AUXILIARY CONTROL VALVES (DELUXE MODELS)
  • WHEEL TRACK ADJUSTMENT
  • STEERING ANGLE ADJUSTMENT
  • TIRES
  • BALLAST
  • MAXIMUM PERMITTED WEIGHTS
• SECTION 4 -LUBRICATION AND MAINTENANCE
  • INTRODUCTION
  • SAFETY PRECAUTIONS
  • HOW TO PREVENT CONTAMINATION OF THE SYSTEM
  • MAINTENANCE INTERVALS
  • RUNNING-IN PERIOD
  • MISCELLANEOUS CHECKS
  • WARNING LIGHTS
  • ENVIRONMENTAL CONSIDERATIONS
  • ENGINE COOLING SYSTEM
  • RADIATOR
  • TIRES
  • TRACTOR REFUELING
  • ACCESS FOR INSPECTION AND MAINTENANCE
  • INTRODUCTION
  • FLEXIBLE MAINTENANCE (OPERATIONS TO PERFORM ONLY IF NECESSARY)
  • WHEN DASHBOARD INDICATORS LIGHT UP
  • EVERY 10 HOURS OF WORK
  • EVERY 50 HOURS OF WORK
  • EVERY 100 HOURS OF WORK
  • EVERY 600 HOURS OF WORK
  • EVERY 1200 HOURS OR EVERY YEAR
  • EVERY 1200 HOURS OF WORK OR EVERY 2 YEARS
  • EVERY 1800 HOURS OF WORK
  • ELECTRICAL SYSTEM - GENERAL INFORMATION
  • ELECTRICAL SYSTEM - GENERAL INFORMATION
  • BATTERY
  • FUSES AND RELAYS
  • LUBRICANTS AND FLUIDS
• SECTION 5 - TROUBLESHOOTING
  • INTRODUCTION
  • ENGINE
  • ELECTRICAL SYSTEM
  • HYDRAULIC SYSTEM
  • HYDRAULIC LIFT AND THREE-POINT LINKAGE
  • BRAKES
  • CAB
• SECTION 6 - TRACTOR STORAGE
  • TRACTOR STORAGE
• SECTION 7 - ACCESSORIES
  • FOLD-DOWN ROPS
  • JOYSTICK FOR AUXILIARY CONTROL VALVES (OPTIONAL)
  • FRONT LOADER PREARRANGEMENT
  • CONTROL VALVE FOR TRAILER HYDRAULIC BRAKES
• SECTION 8 - SPECIFICATIONS AND DATA
  • SPECIFICATIONS AND DATA
• SECTION 9 - FORMS
  • DELIVERY REPORT
  • FIRST 50 HOUR SERVICE
• SECTION 10 - INDEX
  • INDEX