CASE Farmall 75N, 85N, 95N tractors pdf Operator’s manual

This operator's manual in PDF format contains general instructions for the maintenance and repair of CASE Farmall tractors of the N-series series. Following the procedures in this manual will help ensure the safety and reliability of your equipment.

This manual allows you to save time searching for instructions on maintenance, assembly, and installation, maintenance, and repair of your tractor. This manual allows you to improve the quality of maintenance of the Case tractor.

For your convenience, we present to you the link “Instant preview of the CASE manual pdf” at the top of this page. This link will help you preview this PDF manual and see if the manual contains the information you need for your service or not.

This maintenance manual is in PDF format. Thus, it does not require installation (instant download). To work with PDF instructions, we recommend using the Adobe Acrobat Reader application. In addition, we recommend that you print this manual and use it as a reference when needed.

Models:
Farmall 75N
Farmall 85N
Farmall 95N

CONTENTS:

• Section 0
  • To The Owner
  • Improvements
  • California Proposition 65 Warning
• Section 1
  • General Information and Safety
  • Tractor Identification Plates
  • Important Ecological Considerations
  • Precautionary Statements
  • Personal Safety
  • Machine Safety
  • Information
  • Working Safely
  • Safety Decals
  • Standardized Symbols
  • Tractor Noise Level Information Sheet
• Section 2
  • General Information, Controls and Instruments
  • Introduction
  • Digital Instrument Control Panel
  • Digital Indicators
  • Indicator Light Panel Operation
  • Controls
  • Cab
  • Air-conditioning/Ventilation
  • Cab Air-conditioning/Heating Controls
  • Seat
  • Transmission with Range Gear and Mechanical Shuttle 30/40 Km/h (16F + 16R)
  • Transmission with Range Gear and Electrohydraulic Shuttle 30/40 Km/h (16FWD + 16REV)
  • 18.64 mph (30 Km/h) Transmission Version (16FWD + 16REV)
• Section 3
  • Field Operation
  • Starting and Stopping
  • Brakes
  • Electronically Controlled Electro-hydraulic MFD
  • Differential Lock
  • Power Take-off
  • Mechanically Controlled Hydraulic Lift
  • Three-point Linkage
  • Implement Connection Points
  • Auxiliary Control Valves (Use and Maintenance)
  • Rear Remote Valves
  • Wheel Track Adjustment
  • Mfd Front and Rear Wheel Track Adjustment
  • Steering Angle Adjustment (MFD)
  • Front Axle Swing Adjustment
  • Tires
  • Loading Information
  • Speed Code
  • Inflation Pressures
  • Tire Sizes
  • Tire Combinations
  • Metal Ballasting
  • Permitted Maximum Weights
  • MFD Models
• Section 4
  • Lubrication and Maintenance
  • Tractor Refueling
  • Access for Inspection and Maintenance
  • Lubrication and Maintenance Table
  • Flexible Maintenance
  • When the Indicator Light Illuminates on the Dashboard
  • Every 10 Hours of Work
  • Every 50 Hours of Work
  • Every 100 Hours of Work
  • Every 300 Hours of Work
  • Every 500 Hours of Work (Models 75N and 85N)
  • Every 600 Hours of Work (Model 95N)
  • Every 1200 Hours or Every Year
  • Every 1200 Hours of Work or Every 2 Years
  • Every 1800 Hours of Work
  • Electrical System
  • Starting The Engine with a Flat Battery or No Battery
  • Fuses and Relays
  • Location of Fuses and Relays
  • Front Headlight Adjustment and Replacement
  • Recommendations For Bodywork Maintenance
  • Lubricants and Fluids
• Section 5
  • Troubleshooting, Causes and Solutions
• Section 6
  • Prolonged Tractor Inactivity
• Section 7
  • Accessories
  • Towing Equipment
  • Fold-down Roll Bar
• Section 8
  • Specifications and Data
  • Weights
  • Engine Data
• Section 9
  • Inspections and/or Operations to be Carried Out
• Section 10
  • Index