Case Farmall 65С and 75С Tractors pdf Operator’s manuals

These operator's manuals in PDF format contain information on servicing tractors CASE of such models as:

Farmall 65C
Farmall 75C

These manuals include detailed illustrations and diagrams, pictures with descriptions to help you troubleshoot problems and malfunctions.

This set of tutorials is in PDF format that works with Adobe Reader. This application will allow you to search for the information you need using the search function, view information, copy, select and print any page, diagram, or image. PDF documents can be read on all devices.

You can study this manual in pdf format using the screenshots and list of contents provided in the manual description. You can also click on the link "Instant preview of the CASE manual pdf" and view the pages of this manual.

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • Introduction
  • Intended use
  • Electromagnetic interference (EMC)
  • International symbols
  • Identification plates
  • Machine orientation
  • Operator's manual storage
  • Ecology and the Environment
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules – Maintenance
  • Safety rules - Wheels and tires
  • Safety rules – Explosions and fires
  • Safety rules - Fire extinguisher
  • Safety rules – Battery
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules – Mounting and dismounting the machine
  • Safety rules - Lifting and overhead loads
  • Ecology and environment
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Fire and explosion prevention
  • Access to operator's platform
  • Safety signs
• 3 CONTROLS AND INSTRUMENTS
  • ACCESS TO OPERATOR'S PLATFORM
  • OPERATOR'S SEAT
  • INSTRUCTOR'S SEAT
  • FORWARD CONTROLS
  • LEFT-HAND SIDE CONTROLS
  • RIGHT-HAND SIDE CONTROLS
  • Power sockets
  • Settings and display
• 4 OPERATING INSTRUCTIONS
  • COMMISSIONING THE UNIT
  • STARTING THE UNIT
  • STOPPING THE UNIT
  • MOVING THE UNIT
• 5 TRANSPORT OPERATIONS
  • ROAD TRANSPORT
  • RECOVERY TRANSPORT
• 6 WORKING OPERATIONS
  • GENERAL INFORMATION
  • Transmission
  • FOUR WHEEL DRIVE (4WD)
  • DIFFERENTIAL LOCK
  • REAR POWER TAKE-OFF (PTO)
  • REAR REMOTE CONTROL VALVE(S)
  • REAR HYDRAULIC LIFT
  • Three-point hitch
  • Front loader
  • TOWBAR
  • WHEELS AND TIRES
  • BALLAST
• 7 MAINTENANCE
  • GENERAL INFORMATION
  • MAINTENANCE CHART
  • As necessary
  • AT WARNING MESSAGE DISPLAY
  • Every 10 hours or daily
  • After the first 50 hours of operation
  • Every 50 hours
  • Every 100 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 1200 hours or two years
  • Every two years
  • Every 3600 hours or four years
  • Electrical system
  • STORAGE
• 8 TROUBLESHOOTING
  • FAULT CODE RESOLUTION
  • ALARM(S)
• 9 SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Speed table for 8 x 8 gearbox
  • Speed table for 8 x 8 gearbox with additional reducer (12 x 12)
  • 12 x 12 transmission speed table
  • Speed table for 12 x 12 gearbox with additional reducer (20 x 20)
  • Technical data
  • Consumables
  • Capacities
  • Engine oil temperature chart
  • Loader specifications
• 10 ACCESSORIES
  • Radio
  • Single piece ballast
  • Coolant immersion heater (where fitted)