Case Farmall 115C tractor PDF Operation manuals

We provide you with the opportunity to review and purchase an official high-quality, easy-to-use electronic manual, composed of sections with detailed safety instructions, maintenance procedures, troubleshooting, settings, and more.

The Manual has been compiled by Case to provide you with all the information you need about the tractor and the safety rules associated with it, along with operating and maintenance instructions that allow the operator to use the tractors at full power for optimal results and maintain the efficiency of the tractors with the passage of time.

In addition, you can see many illustrations, diagrams, tables in which you can see the solution to any problems and visually view the tractor. We recommend that you read all factory information, especially the safety sections, and follow all rules, tips, and recommendations for the use of tractors of these models.

The instructions are presented in PDF format on 272 and 262 reading pages. You can follow this tutorial after installing Adobe PDF Reader.

Models:
115C

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • Note to the Owner
  • Proposition 65
  • Electro-magnetic interference (EMC)
  • International symbols
  • Introduction
  • Operator's manual storage
  • Tractor intended use
  • Ecology and the Environment
  • Identification plates
  • Component Identification
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety information
  • Air conditioning safety regulations
  • Vehicle vibration levels
  • Cab guard
  • Machine stability
  • Personal protective equipment (PPE)
  • Tractor jacking points
  • Hazardous chemicals
  • Burn prevention
  • Fire or explosion prevention
  • Getting in and out of the machine
  • Emergency exit
  • Safety signs
• 3 CONTROLS/INSTRUMENTS
  • ACCESS TO OPERATOR'S PLATFORM
  • OPERATOR'S SEAT
  • INSTRUCTOR'S SEAT
  • FORWARD CONTROLS
  • LEFT-HAND SIDE CONTROLS
  • RIGHT-HAND SIDE CONTROLS
  • EXTERIOR CONTROLS
  • DISPLAY SETTINGS
• 4 OPERATING INSTRUCTIONS
  • COMMISSIONING THE UNIT
  • STARTING THE UNIT
  • STOPPING THE UNIT
  • MOVING THE UNIT
• 5 TRANSPORT OPERATIONS
  • ROAD TRANSPORT
  • RECOVERY TRANSPORT
• 6 WORKING OPERATIONS
  • FOUR WHEEL DRIVE (4WD)
  • DIFFERENTIAL LOCK
  • REMOTE CONTROL VALVES
  • REAR POWER TAKE-OFF (PTO)
  • REAR HYDRAULIC LIFT
  • REAR 3-POINT HITCH
  • TOWBAR
  • REAR TOW HITCH
  • WHEELS AND TIRES
  • WHEEL TRACK ADJUSTMENT
  • BALLAST
• 7 MAINTENANCE
  • GENERAL INFORMATION
  • MAINTENANCE CHART
  • As required
  • At warning message display
  • Every 10 hours or daily
  • After first 50 hours
  • Every 50 hours
  • Every 100 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 1200 hours or two years
  • Every 3000 hours
  • ELECTRICAL SYSTEM
  • STORAGE
  • CALIBRATION
• 8 TROUBLESHOOTING
  • FAULT CODE RESOLUTION
  • ALARM(S)
  • SYMPTOM(S)
• 9 SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on drawbar
  • Technical data
• 10 ACCESSORIES
  • Radio
  • Joystick and Electric Hydraulic (EH) control - Operating
  • Front loader and bucket - Operating