Case farmall 110A, 120A, 130A, 140A T4B pdf Operation manuals

These PDF manuals describe the technical information and operating procedures for CASE tractors:

Models:
FARMALL 110A
FARMALL 120A
FARMALL 130A
FARMALL 140A

These manuals contain many diagrams, special instructions, technical information, so use all of this information for each service and repair procedure. Read the instructions before starting the equipment to avoid damage and prolong the life of your machine.

The Case manuals are provided in PDF format, which makes them much easier to use as they do not require installation (INSTANT DOWNLOAD). We recommend using Adobe PDF Reader to view these PDF guides.

At the top of the page, you can see a link "Instant Case pdf preview". By clicking on it, you can see what the manual is about, the quality of the images and drawings. You can also read the content list below.

If you have any questions or problems with downloading the file, you can write to us and we will help you.

Contents:

• 1 GENERAL INFORMATION
  • Note to the owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Product identification
  • Product Identification Number (PIN)
  • Operator's manual storage on the machine
  • Machine orientation
  • Machine components
  • Selective Catalytic Reduction (SCR) exhaust treatment - Product overview
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules
  • Ecology and the environment
  • Safety signs
  • Informational decals
• 3 CONTROLS AND INSTRUMENTS
  • Access to operator's platform
  • Operator's seat
  • Instructional seat
  • Forward controls
  • Left-hand side controls
  • Right-hand side controls
  • Rearward controls
  • Overhead controls
  • Display
• 4 OPERATING INSTRUCTIONS
  • Commissioning the unit
  • Starting the unit
  • Stopping the unit
  • Moving the unit
• 5 TRANSPORT OPERATIONS
  • Road transport
  • Recovery transport
• 6 WORKING OPERATIONS
  • Tires and wheels
  • Driveline
  • Hydraulic system
  • Implements
• 7 MAINTENANCE
  • General information
  • Maintenance planning
  • Warning light on
  • Every 10 hours or daily
  • Every 50 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 3600 hours or two years
  • Every 4000 hours or four years
  • As required
  • Fuse and relay locations
  • Storage
• 8 TROUBLESHOOTING
  • Symptom(s)
• 9 SPECIFICATIONS
  • Length and height
  • Width
  • Ground clearance
  • Weight
  • Engine
  • Cooling system
  • Transmission
  • Ground speeds
  • Maximum side slope operation
  • Power Take-Off (PTO)
  • Hydraulic system
  • Three-point linkage
  • Brake system
  • Steering system
  • Electrical system
  • Lubrication system - Capacities
• 10 ACCESSORIES
  • Engine
  • Chassis
  • Cab
  • Roll Over Protective Structure (ROPS)
  • Safety
  • Hydraulics
  • Hitch
• 11 FORMS AND DECLARATIONS
  • Delivery report - Owner copy
  • Delivery report - Dealer copy