Case Farmall 105V PDF Operation manuals

In these manuals, you will find information about Case Farmall 105V.

The operating instructions are written for experienced professionals and contain sections specially designed for this tractor. These manuals include step-by-step instructions for service repairs, maintenance information, schematic diagrams, technical specifications, troubleshooting, and others, designed to ensure the quality operation of the tractor.

These manuals are a service and repair system that allows you to identify and correct problems and inaccuracies in the operation of your tractor. In these instructions, you will find everything you need for high-quality repair, maintenance, and operation - see the screenshot below and in the table of contents.

Information in manuals is provided in PDF format in English. We recommend using Adobe PDF Reader to ensure that all images/graphics are displayed correctly. If you have questions about working with manuals, please contact our managers, they will help you figure it out.

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Proposition 65
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Metric and imperial units abbreviations
  • Identification plates
  • Identification plates
  • Machine orientation
  • Component Identification
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules - Maintenance
  • Safety rules - Wheels and tires
  • Safety rules - Explosions and fires
  • Safety rules - Battery
  • Safety rules - Passenger seat
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules - Getting on and off the machine
  • Safety rules - Lifting and overhead loads
  • Ecology and the environment
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Safety signs
• 3 CONTROLS AND INSTRUMENTS
  • ACCESS TO OPERATOR'S PLATFORM
  • OPERATOR'S SEAT
  • FORWARD CONTROLS
  • LEFT-HAND SIDE CONTROLS
  • OVERHEAD CONTROLS
  • EXTERIOR CONTROLS
  • DISPLAY SETTINGS
  • TRANSMISSION
• 4 OPERATING INSTRUCTIONS
  • STARTING THE UNIT
  • STOPPING THE UNIT
  • MOVING THE UNIT
• 5 TRANSPORT OPERATIONS
  • ROAD TRANSPORT
  • RECOVERY TRANSPORT
• 6 WORKING OPERATIONS
  • FOUR WHEEL DRIVE (4WD)
  • DIFFERENTIAL LOCK
  • REMOTE VALVES
  • POWER TAKE OFF (PTO)
  • HYDRAULIC LIFT
  • REAR THREE-POINT HITCH
  • SWINGING DRAWBARS
  • WHEELS AND TIRES
  • WHEEL TRACK ADJUSTMENT
  • BALLAST
• 7 MAINTENANCE
  • GENERAL INFORMATION
  • MAINTENANCE CHART
  • AS REQUIRED
  • AT WARNING MESSAGE DISPLAY
  • EVERY 10 HOURS OR EACH DAY
  • EVERY 50 HOURS
  • EVERY 100 HOURS
  • EVERY 300 HOURS
  • EVERY 600 HOURS
  • EVERY 1200 HOURS OR ANNUALLY
  • EVERY 1200 HOURS OR EVERY 2 YEARS
  • EVERY 3600 HOURS OR EVERY 4 YEARS
  • ELECTRICAL SYSTEM
  • STORAGE
  • CALIBRATIONS
• 8 TROUBLESHOOTING
  • FAULT CODE RESOLUTION
  • ALARM(S)
• 9 SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on drawbar
  • Consumables
  • Technical data
• 10 ACCESSORIES
  • Cab radio set - Operating
  • Hydraulic valve for trailer brakes Not available on all markets