Case Farmall 100C, 110C, 120C PDF Operation manual

This operator's manual in PDF format covers all work required to repair and service the CASE Farmall 100C / 110C / 120C tractors.

This manual contains important technical data, maintenance, and repair information, maintenance instructions, a settings section, many useful diagrams, of course, a safety section and illustrations, etc.

The instructions are presented in PDF format and include 370 pages, which greatly simplifies their use since they do not require installation (INSTANT DOWNLOAD). We recommend using Adobe PDF Reader to view these PDF guides.

At the top of the page, you can see the link "Instant CASE manual pdf". By clicking on it, you can see what these guides are about, as well as the quality of the images and drawings. You can also read the content list below.

Models:
Farmall 100C
Farmall 110C
Farmall 120C

Contents:

• 1. GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Metric and imperial units abbreviations
  • Identification plates
  • Approval data plate
  • Operator's manual storage
  • Machine orientation
  • Health and safety related standards applied to your tractor
  • Selective catalytic reduction (SCR) system
• 2. SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules – Maintenance
  • Safety rules - Wheels and tires
  • Safety rules – Explosions and fires
  • Safety rules - Fire extinguisher
  • Safety rules – Battery
  • Safety rules - Instructor seat
  • Safety rules - Passenger seat
  • Safety rules – Operator presence system
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Reflectors and warning lights
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules – Mounting and dismounting the machine
  • Safety rules - Lifting and overhead loads
  • Safety rules - Front end loader
  • Ecology and the environment
  • Airborne noise emission
  • Vibration levels
  • Machine stability
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Emergency escape from cab
  • Wheel chocks
  • Safety signs
• 3. CONTROLS AND INSTRUMENTS
  • Access to operator's platform
  • Operator's seat
  • Instructional seat
  • Forward controls
  • Left-hand side controls
  • Right-hand side controls
  • Display
  • Warning and advisory symbols
• 4. OPERATING INSTRUCTIONS
  • Commissioning the unit
  • Starting the unit
  • Stopping the unit
  • Moving the unit
• 5. TRANSPORT OPERATIONS
  • Road transport
  • Recovery transport
• 6. WORKING OPERATIONS
  • General information
  • Drive
  • Rear remote control valves
  • Rear Power Take-Off (PTO)
  • Rear hydraulic lift
  • Rear three-point hitch
  • Towbar
  • Towing hook
  • Tires and wheels
  • Tread and fender settings
  • Ballasting
  • Power sockets
• 7. MAINTENANCE
  • General information
  • Maintenance planning
  • As required
  • At warning message display
  • Every 10 hours or daily
  • After the first 50 hours of operation
  • Every 50 hours
  • Every 100 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 1200 hours or two years
  • Every two years
  • Every 3600 hours or four years
  • Electrical system
  • Fuse and relay locations
  • Storage
  • CALIBRATION
• 8. TROUBLESHOOTING
  • Fault code resolution
  • Symptom(s)
• 9. SPECIFICATIONS
  • General dimensions
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on towing hitch
  • Speed table for 20 x 20 gearbox
  • Speed table for 24 x 24 gearbox
  • Speed table for 24 x 24 gearbox
  • Speed table for 40 x 40 gearbox
  • Speed table for 40 x 40 gearbox
  • Additional equipment attachment points
  • Consumables
  • Capacities
  • General specification
• 10. ACCESSORIES
  • Radio
  • Single piece ballast
  • Coolant immersion heater (where fitted)
  • Front-end loader fixation points