Case 80V 90V 100V 110V PDF Operators manuals

The Case manuals are present special for tractors Quantum V Series and include information and data for operation, maintenance, and repair for better use and prolong quality work.

Also, the manuals contain the information you need, installation instructions, customer service manuals, step-by-step recommendations with descriptions and pictures schematics, and troubleshooting guidelines. The manual is a Case tractor operation and maintenance system that enables diagnostic tests to identify and resolve issues and uncertainties that arise.

The factory information in the manuals is quite simple, it will be clear to both a specialist and a beginner in this matter. The PDF format of the manuals allows you to copy, print any text, image, diagram, or even the entire document. All you need is to install the Adobe PDF Reader application so that all pictures and diagrams are displayed correctly. Print out the section you want and take it with you to the garage so that everything you need is always at hand.

Models:
Quantum 80v
Quantum 90v
Quantum 110v
Quantum 110v

Contents:

• 1. GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Metric and imperial units abbreviations
  • Identification plates
  • Approval data plate
  • Operator's manual storage
  • Machine orientation.
  • Exhaust Gas Recirculation (EGR) system
• 2. SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules – Maintenance
  • Safety rules - Wheels and tires
  • Safety rules – Explosions and fires
  • Safety rules - Fire extinguisher
  • Safety rules – Battery
  • Safety rules – Operator presence system
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - Category 2 cabin (standard)
  • Safety rules - Category 4 cabin (if equipped)
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules — Application of plant protection products
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules – Mounting and dismounting the machine
  • Safety rules - Lifting and overhead loads
  • Ecology and the environment
  • Safety aspects in accordance with Regulation (EU) 1322/2014 - Annex XXII and subsequent
  • amendments and modifications
  • Noise level
  • Vibration levels
  • Machine stability
  • Decals and plates - Safety signs
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Emergency exit
  • Wheel chocks
• 3. CONTROLS AND INSTRUMENTS
  • Access to operator's platform
  • Operator's seat
  • Forward controls
  • Left-hand side controls
  • Right-hand side controls
  • Overhead controls
  • Exterior controls
  • Display
• 4. OPERATING INSTRUCTIONS
  • Commissioning the unit
  • Starting the unit
  • Stopping the unit
  • Moving the unit
• 5. TRANSPORT OPERATIONS
  • Road transport
  • Recovery transport
• 6. WORKING OPERATIONS
  • General information
  • Engine accelerator controls
  • Constant engine RPM
  • Clutch pedal
  • Brakes
  • Trailer braking systems
  • Four-Wheel Drive (4WD)
  • Differential lock system
  • Air conditioning
  • Cab pressurizing system
  • Remote control valves
  • Rear Power Take-Off (PTO)
  • Front Power Take-Off (PTO)
  • Rear hydraulic lift
  • Rear three-point hitch
  • Three-point hitch front
  • Towbar
  • Rear tow hitch
  • Wheels and tires
  • Track adjustment
  • Ballasting
  • Power sockets
  • Beacon
• 7. MAINTENANCE
  • General information
  • Maintenance planning
  • As required
  • AT WARNING MESSAGE DISPLAY
  • Every 10 hours or daily
  • Initial 50 hours
  • Every 50 hours
  • Every 100 hours
  • Every 200 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 1200 hours or two years
  • Every two years
  • Every 3600 hours
  • Electrical system
  • Light adjustments
  • Fuse and relay locations
  • Storage
  • Calibrations
• 8. TROUBLESHOOTING
  • Fault code resolution
  • Symptom(s)
• 9. SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on towing hitch
  • Maximum permitted loads on drawbar
  • Maximum permitted loads on three point hitch
  • Additional equipment attachment points
  • Mid-mounted implement mounting brackets
  • Speed table for 16x16 gearbox
  • Speed table for 28x16 gearbox
  • Speed table for 32x16 gearbox
  • Speed table 44x16 gearbox
  • Capacities
  • Consumables
  • General specification
• 10. ACCESSORIES
  • Tool box - Overview
  • Radio
  • Fuel cooler - Overview