Case 80V, 90V, 100V, 110V pdf Operation manuals

We present to your attention a set of Operating Manuals for Case Farmall V-Series tractors. This set is your irreplaceable assistant in the operation, maintenance, and repair of tractors of the following models:

Farmall 110V
Farmall 100V
Farmall 90V
Farmall 80V

Read all sections carefully, pay particular attention to the safety section, and follow all recommendations. This will help you avoid problems and breakdowns with tractors. The manuals contain detailed information about the working device, technical information, safety, controls, tools, and technical data for operation, troubleshooting, and others.

The guides are in PDF format that you can print and read. We recommend using Adobe PDF Reader to ensure that all images, charts, and tables are displayed correctly. You can print pages, images, diagrams, or entire manuals as needed.

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Metric and imperial units abbreviations
  • Identification plates
  • Approval data plate
  • Operator's manual storage
  • Machine orientation
  • Exhaust Gas Recirculation (EGR) system
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules – Maintenance
  • Safety rules - Wheels and tires
  • Safety rules – Explosions and fires
  • Safety rules - Fire extinguisher
  • Safety rules – Battery
  • Safety rules – Operator presence system
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Reflectors and warning lights
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - Category 2 cabin (standard)
  • Safety rules - Category 4 cabin (if equipped)
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules — Application of plant protection products
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules – Mounting and dismounting the machine
  • Safety rules - Lifting and overhead loads
  • Ecology and the environment
  • Noise level
  • Vibration levels
  • Machine stability
  • Decals and plates - Safety signs
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Emergency exit
  • Wheel chocks
• 3 CONTROLS AND INSTRUMENTS
  • Access to operator's platform
  • Operator's seat
  • Forward controls
  • Left-hand side controls
  • Right-hand side controls
  • Overhead controls
  • Exterior controls
  • Display
• 4 OPERATING INSTRUCTIONS
  • Commissioning the unit
  • Starting the unit
  • Stopping the unit
  • Moving the unit
• 5 TRANSPORT OPERATIONS
  • Road transport
  • Recovery transport
• 6 WORKING OPERATIONS
  • General information
  • Engine accelerator controls
  • Constant engine RPM
  • Clutch pedal
  • Brakes
  • Four-Wheel Drive (4WD)
  • Differential lock system
  • Air conditioning
  • Cab pressurizing system
  • Remote control valves
  • Rear remotes valves
  • Rear Power Take-Off (PTO)
  • Front Power Take-Off (PTO)
  • Rear hydraulic lift
  • Hydraulic lift with electronic control
  • Rear three-point hitch
  • Three-point hitch front
  • Towbar
  • Wheels and tires
  • Wheel track adjustment
  • Ballasting
  • Power sockets
  • Rotating beacon
• 7 MAINTENANCE
  • General information
  • Maintenance planning
  • As required
  • AT WARNING MESSAGE DISPLAY
  • Every 10 hours or daily
  • Initial 50 hours
  • Every 50 hours
  • Every 100 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 1200 hours or two years
  • Every two years
  • Every 3600 hours
  • Electrical system
  • Light adjustments
  • Fuse and relay locations
  • Storage
  • Calibrations
• 8 TROUBLESHOOTING
  • Fault code resolution
  • Symptom(s)
• 9 SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on drawbar
  • Maximum permitted loads on three point hitch
  • Additional equipment attachment points
  • Additional equipment attachment points
  • Mid-mounted implement mounting brackets
  • Speed table for 16x16 gearbox
  • Speed table for 28x16 gearbox
  • Speed table for 32x16 gearbox
  • Speed table 44x16 gearbox
  • Capacities
  • Consumables
  • General specification
• 10 ACCESSORIES
  • Tool box - Overview
  • Radio
  • Fuel cooler - Overview