Case 80CL 90CL 100CL 110CL PDF Operators manuals

This factory set of manuals provide detailed service information, special instructions for repair and maintenance, troubleshoot, and other additional information for Case tractors Quantum CL-series. The manual is an important and indispensable source of information for service workshops that are engaged in the repair and service of the Case technics and also for people who wanted more understanding of their equipment.

This set of manuals contains step-by-step recommendations, technical information, schemes, troubleshooting data, instructions, and illustrations that will help prevent breakages and prolong the quality work of the Case tractors.

At the top of the page, you can see the link 'Case pdf manual instant preview'. By clicking on it, you can see what this manual is all about, what quality of pictures and drawings in it. You can also read the list of content that is presented below.

The set of manuals comes in PDF format. We recommend you use the application Adobe Acrobat Reader for working with PDF instruction. Also, we recommend you print this manual and use it as a handbook when it will be necessary.

Models:
80CL
90CL
100CL
110CL

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • Intended use
  • Electro-Magnetic Compatibility (EMC)
  • Manual scope and required training level
  • Metric and imperial units abbreviations
  • Identification plates
  • Approval data plate
  • Operator's manual storage
  • Machine orientation.
  • Exhaust Gas Recirculation (EGR) system
• 2 SAFETY INFORMATION
  • Safety rules and signal word definitions
  • Safety rules - General information
  • Safety rules – Maintenance
  • Safety rules - Wheels and tires
  • Safety rules – Explosions and fires
  • Safety rules - Fire extinguisher
  • Safety rules – Battery
  • Safety rules – Operator presence system
  • Safety rules - Power Take-Off (PTO)
  • Safety rules - Seat belts
  • Safety rules - Operator protective structure
  • Safety rules - Category 2 cabin (standard)
  • Safety rules - Category 4 cabin (if equipped)
  • Safety rules - HVAC system
  • Safety rules - Personal Protective Equipment (PPE)
  • Safety rules - "Do not use" sign
  • Safety rules — Application of plant protection products
  • Safety rules - Hazardous chemicals
  • Safety rules - Near utilities
  • Safety rules - In the event of electrical storms
  • Safety rules – Mounting and dismounting the machine
  • Safety rules - Lifting and overhead loads
  • Ecology and the environment
  • Safety aspects in accordance with Regulation (EU) 1322/2014 - Annex XXII and subsequent
  • amendments and modifications
  • Noise level
  • Vibration levels
  • Machine stability
  • Decals and plates - Safety signs
  • Towing the tractor for recovery
  • Tractor jacking points
  • Burn prevention
  • Emergency exit
  • Wheel chocks
• 3 CONTROLS AND INSTRUMENTS
  • Access to operator's platform
  • Operator's seat
  • Forward controls
  • Left-hand side controls
  • Right-hand side controls
  • Overhead controls
  • Exterior controls
  • Display
• 4 OPERATING INSTRUCTIONS
  • Commissioning the unit
  • Starting the unit
  • Stopping the unit
  • Moving the unit
• 5 TRANSPORT OPERATIONS
  • Road transport
  • Recovery transport
• 6 WORKING OPERATIONS
  • General information
  • Engine accelerator controls
  • Constant engine RPM
  • Clutch pedal
  • Brakes
  • Trailer braking systems
  • Four-Wheel Drive (4WD)
  • Differential lock system
  • Air conditioning
  • Cab pressurizing system
  • Remote control valves
  • Rear Power Take-Off (PTO)
  • Front Power Take-Off (PTO)
  • Rear hydraulic lift
  • Rear three-point hitch
  • Three-point hitch front
  • Towbar
  • Rear tow hitch
  • Wheels and tires
  • Track adjustment
  • Ballasting
  • Power sockets
  • Beacon
• 7 MAINTENANCE
  • General information
  • Maintenance planning
  • As required
  • AT WARNING MESSAGE DISPLAY
  • Every 10 hours or daily
  • Initial 50 hours
  • Every 50 hours
  • Every 100 hours
  • Every 200 hours
  • Every 300 hours
  • Every 600 hours
  • Every 1200 hours or annually
  • Every 1200 hours or two years
  • Every two years
  • Every 3600 hours
  • Electrical system
  • Light adjustments
  • Fuse and relay locations
  • Storage
  • Calibrations
• 8 TROUBLESHOOTING
  • Fault code resolution
  • Symptom(s)
• 9 SPECIFICATIONS
  • Dimensions and weights
  • Maximum permitted loads on front and rear axle
  • Maximum permitted loads on towing hitch
  • Maximum permitted loads on drawbar
  • Maximum permitted loads on three point hitch
  • Additional equipment attachment points
  • Mid-mounted implement mounting brackets
  • Speed table for 16x16 gearbox
  • Speed table for 28x16 gearbox
  • Speed table for 32x16 gearbox
  • Speed table 44x16 gearbox
  • Capacities
  • Consumables
  • General specification
• 10 ACCESSORIES
  • Tool box - Overview
  • Radio
  • Fuel cooler - Overview