CASE 75N/85N/95N/105N PDF Operator’s manuals

These instructions are intended for the correct operation, quality of repair, and timely maintenance of the Quantum Case series tractors, namely:

75n  
85n
95n
105n

If you have any doubts or questions about the use of the tractor, its operation, read this manual. This manual is an integral part of your tractor. The necessary precautions and recommendations for the safety of the operator and bystanders are listed and described in the Safe Operation section at the beginning of this manual. Read and follow the information provided.

In short, in this manual you will find everything you need for high-quality repair, maintenance and operation - see below on the screenshot and in the table of contents. The manual includes step-by-step service instructions, service information, specifications, troubleshooting, and other necessary information for the maintenance and repair of the Tractor Case.

Factory technical information in this manual is in PDF format in English. We recommend using Adobe PDF Reader to ensure that all images/graphics display correctly.

Contents:

• 1 GENERAL INFORMATION
  • Note to the Owner
  • EC Declaration of Conformity
  • Commission directive 2010/52/EU
  • Noise level
  • Electro-magnetic interference (EMC)
  • International symbols
  • Introduction
  • Tractor intended use
  • Ecology and the Environment
  • Identification plates
  • Approval data plate
  • Component Identification
• 2 SAFETY INFORMATION
  • Safety rules
  • Safety information
  • Air conditioning safety regulations
  • Vehicle vibration levels
  • Cab guard
  • Roll over protective structure (ROPS)
  • Machine stability
  • Personal protective equipment (PPE)
  • Tractor jacking points
  • Hazardous chemicals
  • Burn prevention
  • Fire or explosion prevention
  • Getting in and out of the machine
  • Emergency Exit
  • Safety signs
• 3 CONTROLS/INSTRUMENTS
  • ACCESS TO OPERATOR'S PLATFORM
  • OPERATOR'S SEAT
  • FORWARD CONTROLS
  • LEFT-HAND SIDE CONTROLS
  • RIGHT-HAND SIDE CONTROLS
  • EXTERIOR CONTROLS
  • DISPLAY SETTINGS
  • TRANSMISSION
• 4 OPERATING INSTRUCTIONS
  • STARTING THE UNIT
  • STOPPING THE UNIT
  • MOVING THE UNIT
• 5 TRANSPORT OPERATIONS
  • ROAD TRANSPORT
  • RECOVERY TRANSPORT
• 6 WORKING OPERATIONS
  • 2WD or 4WD
  • DIFFERENTIAL LOCK
  • REMOTE VALVES
  • POWER TAKE OFF (PTO)
  • HYDRAULIC LIFT
  • THREE-POINT LINKAGE
  • TOWBAR
  • REAR TOW HITCH
  • MAXIMUM PERMITTED LOADS
  • WHEELS AND TIRES
  • WHEEL TRACK ADJUSTMENT
  • BALLAST
• 7 MAINTENANCE
  • GENERAL INFORMATION
  • MAINTENANCE CHART
  • AS REQUIRED
  • AT WARNING MESSAGE DISPLAY
  • EVERY 10 HOURS OR EACH DAY
  • EVERY 50 HOURS
  • EVERY 100 HOURS
  • EVERY 300 HOURS
  • EVERY 500 HOURS
  • EVERY 600 HOURS
  • EVERY 1200 HOURS OR ANNUALLY
  • EVERY 1200 HOURS OR EVERY 2 YEARS
  • EVERY 1800 HOURS
  • ELECTRICAL SYSTEM
  • CALIBRATIONS
  • STORAGE
• 8 TROUBLESHOOTING
  • FAULT CODE RESOLUTION
  • ALARM(S)
• 9 SPECIFICATIONS
• Technical data
• 10 ACCESSORIES
  • Cab radio set - Operating
  • Hydraulic valve for trailer brakes Not available on all markets
  • Quick coupling three point linkage