Case 140/150/165 and Stage IV Tractors PDF Operators manual
[12/2017]We recommend reading the information in manuals before operating your tractor Case. The manual has been prepared by Case professionals to assist you in the correct operation of your tractor. The manual describes how to properly carry out routine service includes such actions as refueling, cleaning, flushing, adding liquid, replacing consumables, and manual others.
Tractors Case are designed and built to maximize the performance of the machine at the lowest cost, simplicity, and economy in the main operating conditions. In order to keep the tractor in good working order and to ensure a trouble-free operation of the tractor, it is important that the basic procedures are followed, which are detailed in these manuals.
The manual is provided in PDF format that you can print and read. We recommend using Adobe PDF Reader to ensure that all images, diagrams, and tables are displayed correctly. If necessary, you can print pages, images, diagrams, or entire manuals.
Models:
PUMA 140
PUMA 150
PUMA 165
Tractor - Stage IV
Contents:
- 1. GENERAL INFORMATION
- Metric and imperial units abbreviations
- To the owner
- Product identification
- Engine identification
- Drive line identification
- Cab identification
- Product identification plate
- Ecology and the environment
- Noise level information sheet
- Programming tractor functions
- Operator's manual storage
- Before operating the tractor
- International symbols
- Vibration level information sheet
- Machine stability
- Selective Catalytic Reduction (SCR) system
- 2. SAFETY INFORMATION
- Safety precautions
- Safety decals
- Safety rules
- Burn prevention
- Prevention of fire or explosions
- Fire extinguisher
- Protection offered by the tractor
- Hazardous substances
- Emergency exit
- Wheel chock
- Intended use statement
- Passenger's seat
- Safety aspects in accordance with Regulation (EU) 1322/2014 - Annex XXII and subsequent
- amendments and modifications
- 3. CONTROLS AND INSTRUMENTS
- ACCESS TO OPERATOR'S PLATFORM
- OPERATOR'S SEAT
- PASSENGER'S SEAT
- FORWARD CONTROLS
- LEFT-HAND SIDE CONTROLS
- RIGHT-HAND SIDE CONTROLS
- REARWARD CONTROLS
- OVERHEAD CONTROLS
- INSTRUMENT CLUSTER
- 4. OPERATING INSTRUCTIONS
- COMMISSIONING THE UNIT
- STARTING THE UNIT
- STOPPING THE UNIT
- MOVING THE UNIT
- 5. TRANSPORT OPERATIONS
- PREPARING FOR ROAD TRANSPORT
- RECOVERY TRANSPORT
- 6. WORKING OPERATIONS
- GENERAL INFORMATION
- TRANSMISSION
- REAR POWER TAKE-OFF
- FRONT POWER TAKE OFF
- REAR HITCH
- FRONT HITCH
- HYDRAULIC REMOTE CONTROL VALVES
- ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted)
- HYDRAULIC POWER BEYOND PORT
- THREE POINT HITCH
- DRAWBARS AND TOWING ATTACHMENTS
- TRAILER BRAKING SYSTEMS
- WHEEL TRACK ADJUSTMENT
- BALLASTING AND TIRES
- AUXILIARY POWER CONNECTIONS
- 7. MAINTENANCE
- GENERAL INFORMATION
- MAINTENANCE CHART
- WHEN THE WARNING LIGHT IS ON
- EVERY 10 HOURS OR EACH DAY
- FIRST 50 HOURS
- EVERY 50 HOURS
- EVERY 100 HOURS
- EVERY 300 HOURS
- EVERY 600 HOURS
- EVERY 1200 HOURS OR ANNUALLY
- EVERY 1200 HOURS OR EVERY 2 YEARS
- EVERY 1800 HOURS OR EVERY 2 YEARS
- EVERY 3600 HOURS OR EVERY 2 YEARS
- EVERY 3600 HOURS OR EVERY 4 YEARS
- EVERY 36 MONTHS
- GENERAL MAINTENANCE
- STORAGE
- 8. TROUBLESHOOTING
- FAULT CODE RESOLUTION
- ALARM(S)
- SYMPTOM(S)
- 9. SPECIFICATIONS
- General dimensions
- Minimum turn radius
- Axle dimension
- Maximum operating angle
- Maximum permissible operating weights
- Tractor weights
- Capacities
- Engine
- Fuel system
- Air cleaner system
- Cooling system
- Transmission
- Rear Power Take-Off (PTO)
- Front Power Take-Off (PTO)
- Hydraulic system
- Three-point hitch
- Rear remote control valves
- Three-point hitch front
- Front remote control valve couplers
- Brakes
- Steering
- Electrical equipment
- Ground speed chart Semi-Powershift transmission
- Ground speed chart Full-Powershift transmission
- Minimum hardware tightening torques
- 10. ACCESSORIES
- Radio (where fitted)
- External rear view mirrors
- Auxiliary headlights
- Rotating beacon
- Front-end loader fixation points
- 11. FORMS AND DECLARATIONS
- Service record 1st 50 hour, Owner copy
- Service record 1st 50 hour, Dealer copy
- Telematics module declaration of conformity
Screenshots for Case 140/150/165 and Stage IV Tractors PDF Operators manual:
Our company provides for sale original spare part catalogs, workshop manuals, diagnostic software for all models of engines, cars, trucks, buses, forklifts, tractors, harvesters, cranes, buldozers, generators, construction and agricultural machines, motorcycles. To purchase a catalog online, please add the product to your cart, fill in the contact form online. Our managers proceed your order the same day.
Related products for Case 140/150/165 and Stage IV Tractors PDF Operators manual:
New Holland Electronic Service Tool CNH EST 9.14 [2026] Engineering Diagnostic Software
The dealer software Electronic Service Tools CNH EST 9.14 update 1 (ex v9.3, v9.4, v9.5, 9.6, 9.7) with the highest engineering access Level available for download or shipping worldwide with online support!
250$
[03/2026]
|
CNH Display Codes for the Paid Features 2023 v1.1
The app generates codes for CNH displays to unlock paid features. Codes are entered through the display
3999$
[2024]
|
CNH Approval Password Generator 2023 NBV2
CNH (Case/New Holland) Generate approval passwords for Blank ECU, ECU Reassignment, and Download Crash Recovery; Supported ECU types: EDCMS62, EDC7, CNHEDC7UC31, EDC16C39.
1199$
[11/2024]
|
CNH Firmware Decrypt Encrypt Tool (FEDT) v2022.22
CNH Firmware Encrypt & Decrypt tool 2022.22 is Windows desktop software that supports decryption and encryption for *.enc and *.cre files from CNH.
999$
[12/2023]
|





