Bomag Single Drum Roller BW 219/BW 226 Service Manual PDF

Bomag specialists spent a lot of time and knowledge to prepare this manual so that the user of our equipment could always be prepared for any of unwelcome situations and could provide help to himself and his equipment - so take and do.

This service information is a factory guide, which contains detailed service information, operating instructions and maintenance, special instructions for repair and maintenance, service documentation and other necessary data for Single Drum Roller Bomag next models:

BW 219 DH-5
BW 219 PDH-5
BW 226 DH-5
BW 226 PDH-5

A manual has not only been written as a support for the professional specialist, but also for the beginner specialist and owner this equipment. The service manual includes detailed and high-quality diagrams, charts, and pictures that help to carry out all the maintenance procedures, and operation of the roller Bomag (see below detailed contents).

The manual in PDF format. With help, this format you can to find, copy, print individual chapters, and pages, so as this manual is indexed and on English. The Bomag manual is designed to work on a personal computer or on any device (laptop, smartphone), only we recommend to install the applicationAdobe PDF Reader for comfort and correct view all diagrams and information.

To purchase this guide, you can to click on the "buy now" and within 5-7 minutes, you will receive a letter with all the recommendations and instructions to your e-mail. And if you have any questions about this guide - write to us, and we will answer all your questions.

Contents:

• 1. General
  • Introduction
  • Concerning your safety
  • Notes on repair
  • Fuels and lubrication
  • List of fuels and lubricants
• 2. Technical data
  • Technical data, BW 219 DH-5
  • Technical data, BW 219 PDH-5
  • Technical data, BW 226 DH-5
  • Technical data, BW 226 PDH-5
  • Additional technical data
• 3 Overview of machine
  • Electric systems
  • Diesel engine
  • Hydraulic system
  • Drum
  • Stickers and decals
• 4 Electric systems
  • Overview of the electric system
  • CAN BUS overview
  • Telemecanique switch
  • Deutsch plug, series DT and DTM
  • Acceleration transducer
  • Servicing the battery, checking the main battery isolation
  • Starting the engine with jump leads
  • Differential pressure switch for the hydraulic oil filter, B21
  • Air filter vacuum switch, B03
  • Sensor, water in the fuel filter, B124
  • Float switch in coolant compensation tank, B55
  • Level sensor in diesel tank (R03)
  • Charge control lamp
  • Central electrics
  • Power board for SCR-heating
  • Fuse assignment
  • Operator’s platform
• 5 Diesel engine
  • Overview
  • Lubrication oil circuit TCD 4.1 / 6.1
  • Coolant circuit TCD 4.1 / 6.1
  • Common Rail System (CRS)
  • Wastegate charge pressure controller.
  • Exhaust gas recirculation
  • EAT – Exhaust Aftertreatment System
  • Regeneration of exhaust gas after treatment system
  • Engine electrics
  • Inspection and maintenance work
• 6. Hydraulic system
  • Overview of hydraulics
  • Open and closed hydraulic circuit
  • Hydraulic units
  • Charge circuit
  • Travel circuit
  • Vibration circuit
  • Steering circuit
  • Inspection and maintenance work
  • Flushing and bleeding
• 7. Air conditioning
  • Overview
  • Physical principles
  • Refrigerant R134a
  • Compressor oil/refrigeration oil
  • Working principle of the air conditioning system
  • Monitoring devices
  • Description of components
  • Compressor
  • Emptying in case of repair
  • Drying and evacuation
  • Filling instructions
  • Steam table for R134a
  • Inspection and maintenance work
• 8. Oscillating articulated joint
  • Overview
  • Dismantling the oscillating articulated joint
  • Assembly of oscillating articulated join
• 9. Drum
  • Assembly of Padfoot shell
  • Repair overview for drum
  • Dismantling the drum
  • Dismantling and assembling the change-over weight
  • Assembling the drum
  • Changing the rubber buffers, adjusting the pretension
  • Inspection and maintenance work
• 10. Drive axle
  • Checking the oil level in the drive axle
  • Change the oil in the drive axle
  • Change the oil in the drive axle
  • Checking the oil level in the drive axle reduction gear
  • Change the oil in the drum drive reduction gear
  • Checking the oil level in the wheel hubs
  • Changing the oil in the wheel hubs
  • Checking the tire pressure
  • Tighten the wheel nut
  • Retightening the fastening of the axle on the frame
  • Adjust the parking brake
• 11. Troubleshooting
  • Preliminary remarks
  • What to do in events of emergency
  • Troubleshooting, electrical systems
  • Troubleshooting, diesel engine
  • Troubleshooting, hydraulics
  • Troubleshooting, air conditioning system
• 12. Special tools
  • Special tools, electrics
  • Special tools, hydraulic system
  • Special tools for oscillating articulated joint
  • Special tools, drum
  • List of special tools
  • Appendix