Atlas Copco MB1700 & MB1700DP Hydraulic Breakers Repair Manual & Parts List PDF

This set of manuals contains detailed spare parts information, technical service instructions, detailed repair manual and safety information for Hydraulic Breakers Atlas Copco MB1700 and MB1700DP.
These manuals support English, come in PDF format, all pages or manual can be printed easily. To work with manuals you should use Adobe PDF Reader (or any analog).

This set contains following PDF manuals:
Atlas Copco MB1700 & MB1700DP Parts Manual
Atlas Copco MB1700 & MB1700DP Repair Manual

Contents of Parts List:

• General note
• Spare parts list
  • Hydraulic breaker MB 1700
  • Hydraulic breaker MB 1700 DustProtector
  • Percussion unit part 1: cylinder cover
  • Percussion unit part 2: cylinder
  • Percussion unit part 3: lower breaker part
  • Connecting kit for ConitLube II
  • StartSelect - AutoStart or AutoStop
  • Optional parts
• Working tools
  • MB 1700
  • MB 1700 DustProtector
• Accessories
  • Hydraulic hoses
  • Optional equipment
• Kits
  • Label kit MB 1700
  • Label kit MB 1700 DustProtector
  • Seal kit
  • Seal kit for swivel joint (ContiLube II)
  • Plastic parts kit
  • Tensioning bolt kit
  • DustProtector kit
  • Noise protection kit
  • Lower breaker part kit (steel)
  • Lower breaker part kit DustProtector (steel)
  • Expansion bolt kit
  • Accumulator repair kit
• Dimensions
  • Dimensions MB 1700
  • Dimensions MB 1700 DustProtector

Contents of Repair Manual:

• 1. General
  • Explanation of the symbols in the repair manual
• 2. Operational safety
  • General
  • Accident prevention regulations
  • Tools, measuring and testing equipment
  • Operating media / consumables
• 3. Tools
  • General tools
  • Service box
  • Special accessories
  • Accumulator filling device
  • Power wrench
  • HeliCoil tools
  • Fitting aid for percussion piston
  • Press-out aid for wear bushes
• 4. Dismantling the hydraulic hammer
  • Removing the working tool
  • Removing the percussion mechanism of the MB 1700 from the hammer box
  • Removing the high-pressure accumulator
  • Removing the control valve
  • Removing the AutoControl - valve
  • Removing the perforated disk
  • Removing the cylinder cover
  • Removing the percussion piston and sealing bush
  • Removing the cylinder
  • Removing the external-threaded connect
  • Removing the DustProtector
  • Removing the locking pins for the retainer bars in the lower hammer part
  • Removing the locking bushes
• 5. Checking the hammer box
  • Checking for cracks and indentations
  • Wear to the bottom plate
  • Checking the elastic pad
  • Checking the damping elements
  • Checking the guide plates
  • Checking the lower guide plates
  • Checking the upper guide plates
• 6. Assembling the hydraulic hammer
  • Tightening torques for screws and screw couplings on the MB 1700
  • Fitting the cylinder
  • Fitting the percussion piston and sealing bush
  • Fitting the cylinder cover
  • Fitting the AutoControl valve
  • Fitting the perforated disk
  • Fitting the control slide valve
  • Fitting the high-pressure accumulator
  • Fitting the external-threaded connect
  • Fitting the piston accumulator
  • Fitting the percussion mechanism in hammer box
  • Connecting ContiLube II
  • Fitting the working tool
  • Fitting the DustProtector
• 7. Changing the seals
  • Changing the cylinder seals
  • Changing the seals between cylinder and cylinder cover
  • Changing the seals on the external-threaded connect
  • Changing the seals on the control casing cover
  • Changing the seals on the high pressure accumulator
  • Changing the seals on the sealing bush
• 8. Repair work
  • Changing the Allen screws on the high-pressure accumulator
  • Changing the high-pressure accumulator
  • Changing the tie rods
  • Removing scores from control slide valve and bore
  • Removing scores on percussion piston and cylinder bore
  • Replacing retainer bars and working tool
  • Changing the wear bushes
  • Replacing the complete hammer box
  • Replacing guide plates and damping elements in hammer box
  • Replacing the wear protection set
  • Replacing the DustProtector
  • Repairing cracked welds
  • Replacing the bottom plate on the hammer box
  • Reworking the retainer pins for the damping elements
  • Weld seam preparation
  • Preheating temperature
  • Fillers
  • Post-treatment of welds