New Holland Electronic Service Tool CNH EST 9.13 [2026] Engineering Diagnostic Software

CNH Electronic Service Tool (EST) 9.13 Diagnostic Software with Engineering Level* (available for download) is used by New Holland dealer technicians to connect with vehicles that have a Controller Area Network (CAN) BUS.

*For advanced dataset registration, many hidden options are programmed for vehicles and raw message simulations.

The new version of New Holland CNH EST works with OS Windows 10 64-bit and Windows 11 64-bit PRO, except the Home edition.

*Windows 10 support update

Microsoft will stop supporting the Windows 10 Operating System on October 14, 2025. When the support has ended, Windows 10 cannot be considered a safe platform for use online.

The EST 9.13.0.0 software will work for Windows 10 PCs, but future versions of the EST software may not be compatible with Windows 10.

EST 9.13 New Features

You can find the full changelog and detailed feature descriptions in the EST 9.13.0.0 New Features (PDF).

• Engine Flight Recorder Data Log for MD1CE101 and MD1CS069 controllers
• Engine Dataset Selection - Historical lookup for K-Line controllers
• Add support for Ashok Leyland Stage V Engine
• EST Status screen - Add SW ID to main screen
• Engine controller information added to programming error messages
• AFS Pro700 Plus / IntelliView IV Plus / FlexControl 4 Plus support in new models
• Bosch EHC – Electro-Hydraulic Controller support for Midi Excavator

CNH EST Software Download Package includes:

• CNH EST 9.13.0.0.1 installation file
• CNH EST 9.13.0.0.2 update 1 - More information about this update
• CNH EST 9.13.0.0.3 update 2
• CNH EST 9.13.0.0.4 update 3
• Controller Package v200 (01/2026)
• EASY Software installation package v18.1.1.0 (E.A.S.y - additional engine diagnostic tool for connection directly to ECU to perform diagnostic, programming, and ECU reload by K-Line protocol)
• New Legacy Diagnostics database for Troubleshooting
• Activation for a single computer
• TeamViewer remote assistance with setup & activation

Electronic Service Tool Software Brands Coverage

• Case IH Agriculture
• Case Construction
• New Holland Agriculture
• New Holland Construction
• STEYR
• Flexi Coil
• Miller
• Kobelco (since the 9.9 update, this brand is no longer included; if you need it, we can offer the 9.8 version instead)

Minimum PC Hardware Requirements

All computers must use a 64-bit version of their operating system. The older 32-bit options are limited to 4 gigabytes of RAM and cannot provide enough performance to run these programs.

Minimum Specifications

• Processor: Intel Core i5 Processor or higher (manufactured in the last 5 years) or AMD Ryzen 7 4th generation Processor or higher
• RAM Memory: 8 GB or greater
• Operating System: Windows OS: 64-bit (Mandatory)
  Windows 10 PRO, Windows 11 PRO
• Hard Drive: 500 GB or greater; SSD type will be much faster than classic HDD
• Ports: One 9-pin Serial port (preferred) OR USB to RS-232 Converter - FTDI Chipset. Usually suitable cable, will be equipped with the data link kit.
• Two USB ports
• 10/100 Ethernet
• WiFi 802.11b / g
• Bluetooth
• Mobile Wireless (recommended)
• The CNH DPA5 Kit Diagnostic Interface (NOT included).

New Holland Electronic Service Tool Allows You to:

• Check the status of the parameters
• Retrieve faults
• Run diagnostic tests
• Make ECU and parameter programming
• Monitor active and logged diagnostics
• View and change ECU configuration
• View diagnostic procedures and schematics
• Troubleshoot problems
• Run scope diagnostics

CNH EST Software 9.12 New Features

The release of the Electronic Service Tool (EST) 9.12.0.0 and eTIM updates includes several improvements to the service tool software. These changes include:

• Windows 10 support update*
• Support for Utility tractors with “O” in PIN
• Engine Dataset search is enabled when the ECU is Offline
• New IFM Vision Assistant Version Support (New Holland AG only)
• New Vehicle Support
• For the complete changelog, refer to the PDF: What’s New in CNH EST 9.12

CNH EST Software Download Package v9.12 Contains:

• CNH EST 9.12.0.0.1 installation file
• CNH EST 9.12.0.0.2 update one file
• CNH EST 9.12.0.0.3 update two file
• CNH EST 9.12.0.0.4 update three file
• CNH EST 9.12.0.0.5 update four file
• CNH EST 9.12.0.0.6 update five file
• Controller Package v188 (09/2025)
• EASY Software installation package v18.1.1.0 (E.A.S.y - additional engine diagnostic tool for connection directly to ECU to perform diagnostic, programming, and ECU reload by K-Line protocol)
• New Legacy Diagnostics database for Troubleshooting
• Activation for a single computer
• TeamViewer remote assistance with setup & activation

CNH EST Download Package v9.11 Contains:

• CNH EST 9.11.0.0.1 installation file
• CNH EST 9.11.0.0.2 update 1 file
• CNH EST 9.11.0.0.3 update 2 file
• CNH EST 9.11.0.0.4 update 3 file
• CNH EST 9.11.0.0.5 update 4 file
• CNH EST 9.11.0.0.6 update 5 file
• CNH EST 9.11.0.0.7 update 6 file
• CNH EST 9.11.0.0.8 update 7 file
• CNH EST 9.11.0.0.9 update 8 file
• Controller Package v167 (02/2025)
• EASY Software installation package v18.1.1.0 (E.A.S.y - additional engine diagnostic tool for connection directly to ECU to perform diagnostic, programming, and ECU reload by K-Line protocol)
• New Legacy Diagnostics database for Troubleshooting
• Activation for a single computer
• Teamviewer remote assistance with setup & activation

CNH EST Download Package v9.10 Contains:

• CNH EST 9.10.0.0.1 installation file
• CNH EST 9.10.0.0.2 (EST91000Up1) update
• CNH EST 9.10.0.0.3 (EST91000Up2) update
• CNH EST 9.10.0.0.4 (EST91000Up3) update
• CNH EST 9.10.0.0.5 (EST91000Up4) update
• CNH EST 9.10.0.0.6 (EST91000Up5) update
• Controller Package v153 (09/2024)
• EASY Software installation package v18.1.1.0 (E.A.S.y - additional engine diagnostic tool for connection directly to ECU to perform diagnostic, programming, and ECU reload by K-Line protocol)
• New Legacy Diagnostics database for Troubleshooting
• Activation for a single computer
• Teamviewer remote assistance with setup & activation

The Software EST v9.9 Comes As:

• CNH EST 9.9.0.0.1 installation file
• CNH EST 9.9.0.0.2 (EST9900Up1) update
• CNH EST 9.9.0.0.3 (EST9900Up2) update
• CNH EST 9.9.0.0.4 (EST9900Up3) update
• Controller Package v130 (01/2024)
• EASY Software installation package v18.1.1.0 (E.A.S.y - additional engine diagnostic tool for connection directly to ECU to perform diagnostic, programming, and ECU reload by K-Line protocol)
• New Legacy Diagnostics database for Troubleshooting
• Activation for a single computer
• Teamviewer remote assistance with setup & activation

The Software EST v9.8 Comes As:

• CNH EST 9.8.0.0.0 installation file
• CNH EST 9.8.0.0.2 (EST9800Up1) update
• CNH EST 9.8.0.0.3 (EST9800Up2) update
• CNH EST 9.8.0.0.4 (EST9800Up3) update
• CNH EST 9.8.0.0.5 (EST9800Up4) update
• CNH EST 9.8.0.0.6 (EST9800Up5) update
• CNH EST 9.8.0.0.7 (EST9800Up6) update
• Controller Package v113 (09/2023)
• EASY Software installation package (E.A.S.y - additional engine diagnostic tool for connection directly to ECU to perform diagnostic, programming, and ECU reload by K-Line protocol)
• New Legacy Diagnostics database for Troubleshooting
• PC locked activation
• Teamviewer remote assistance with setup & activation

Optionally, you can purchase eTimGo for CNH EST 05.2025 for all brands OFFLINE, which is a completely offline repair and diagnostics information database, with PIN search support.

EST 9.8.0.0 New Features

• EST PC Operating System (OS) and hardware requirements
• Minimum Specifications:
• Processor: Intel Core i5 6th gen Processor or higher (Laptop must be manufactured in the last 5 years)
• RAM Memory: 8 GB or greater
• Operating System: Windows OS: Windows 10 64-bit or Windows 11 64-bit
• Hard Drive: 250 GB or greater - Solid State Drive (SSD) is recommended for improved performance
• Ports: One 9-pin Serial port (preferred) OR USB to RS-232 Converter - FTDI Chipset
• USB to RS232 adapter
• Two USB ports
• Ethernet port
• WiFi 802.11b / g
• Bluetooth
• Mobile Wireless - Recommended
• Vehicle PIN Management
• Diagnostic Tool Manager (DTM)
• PRO 700 Plus / IntelliView IV Plus display support
• Engine download request faults update
• DATAR updates
• New Equipment selections in EST
• Straight Tracking Calibration

EST 9.7.0.0 New Features

The release of the Electronic Service Tool (EST) 9.7.0.0 and the new eTIM software includes several improvements to the service tool software. These changes include:

• EST PC Operating System (OS) and hardware requirements
• Windows 11 support
• EST Software Installation and licensing
• DPA5 Hardware and Firmware updates
• EASy ECU programming crashing
• New Models in EST9700

The Software EST v9.7 Comes As:

• CNH EST 9.7.0.0.0 installation file
• CNH EST 9.7.0.0.2 (EST9700Up1) update
• CNH EST 9.7.0.0.3 (EST9700Up2) update
• CNH EST 9.7.0.0.4 (EST9700Up3) update
• CNH EST 9.7.0.0.5 (EST9700Up4) update
• Controller Package v91 (01/2023)
• EASY Software installation package
• New Legacy Diagnostics database for Troubleshooting
• PC locked activation
• Teamviewer remote assistance with setup & activation

The Software EST v9.6 Comes As:

• CNH EST 9.6.0.0.0 installation file
• CNH EST 9.6.0.0.2 (EST9400Up1) update
• CNH EST 9.6.0.0.3 (EST9400Up2) update
• CNH EST 9.6.0.0.4 (EST9400Up3) update
• CNH EST 9.6.0.0.5 (EST9400Up4) update
• CNH EST 9.6.0.0.6 (EST9400Up5) update
• CNH EST 9.6.0.0.7 (EST9400Up6) update
• CNH EST 9.6.0.0.8 (EST9400Up7) update
• CNH EST 9.6.0.0.9 (EST9400Up8) update
• CNH EST 9.6.0.0.10 (EST9400Up9) update
• CNH EST 9.6.0.0.11 (EST9400Up10) update
• CNH EST 9.6.0.0.12 (EST9400Up11) update
• Controller Package v78 (08/2022)
• EASY Software installation package
• New Legacy Diagnostics database for Troubleshooting
• PC locked activation
• Teamviewer remote assistance with setup & activation

What’s New with EST 9.6.0.0

The release of the Electronic Service Tool (EST) 9.6.0.0 includes several improvements to the service tool software. These changes include:

• EST PC Operating System (OS) and hardware requirements
• Minimum Specifications:
  • Processor: Intel Core i5 6th Gen Processor or higher (Manufactured in 2015 or later)
  • RAM Memory: 8 GB or greater
  • Operating System: Windows OS: Windows 10 64-bit Note: A 64-bit operating system is mandatory
  • Hard Drive: 250 GB or greater - Solid State Drive (SSD) is recommended for improved performance
  • Ports required for adapter connection: One 9 pin Serial port (preferred) OR USB to RS-232 Converter - (FTDI Chipset) 380003514 – USB to RS232 adapter
• New diagnostic adapter support
• The EST9600 base software introduces support for a new diagnostic adapter to interface with CNHi equipment. EST9600 will support both the DPA5 and CoreXS and allow for easy conversion between these two diagnostic adapters.
• To view the connector selection with EST9600, click Communications in the top ribbon. In the dropdown menu, hover over the Communications Adapter Selection.
• Legacy Diagnostics download and installation
• The new legacy troubleshooting database is released and will be available with the EST9600 software.

What’s New with EST 9.5.0.0

The release of the Electronic Service Tool (EST) 9.5.0.0 and new eTIM software includes several improvements to increase the ability of the user to service and diagnose equipment. These changes include:

• EST PC OS and hardware requirements
• EST Software Installation
• Equipment Auto-Detection Support
• EASy Software Management
• EASy Injector Cutout Test Improvements

The Software EST v9.5 Comes As:

• CNH EST 9.5.0.0.0 installation file
• CNH EST 9.5.0.0.2 (EST9400Up1) update
• CNH EST 9.5.0.0.3 (EST9400Up2) update
• CNH EST 9.5.0.0.4 (EST9400Up3) update
• CNH EST 9.5.0.0.5 (EST9400Up4) update
• CNH EST 9.5.0.0.6 (EST9400Up5) update
• CNH EST 9.5.0.0.7 (EST9400Up6) update
• CNHSupportUpdate_27790_3_2_10
• EasyNETMainProgram_27787_10_18_1
• ECM_MD1CS069_DA_FPT_27696_0_45_7
• EDC16C39_P_CNH_1_3_SETUP_28684_1_10_1
• EDC17CV41_CAN_D_CNH_Setup_29247_0_16_1
• EDC17CV41_DA_CNH_28427_1_4_6
• EDC17CV41_VECTOR_DatiMemorizzatiMuda_IV_setup_23505_1_19_6
• MD1_ET_28410_0_3_1
• MD1CS069_DatiMemorizzati_setup_27994_1_2_4
• MD1CS069_DB_27950_0_2_1
• MD1CS069_DB_28493_0_4_7
• 16.1.1.0
• EST Legacy Diagnostics package
• Vehicle Controller Files v67 (03/2022 date of update)
• PC locked activation
• Teamviewer remote assistance with setup & activation

The Software EST v9.4 Comes As:

• CNH EST 9.4.0.0.0 installation file
• CNH EST 9.4.0.0.2 (EST9400Up1) update
• CNH EST 9.4.0.0.3 (EST9400Up2) update
• CNH EST 9.4.0.0.4 (EST9400Up3) update
• CNH EST 9.4.0.0.5 (EST9400Up4) update
• Vehicle Controller Files v46
• Legacy Multilanguage Diagnostic Procedures installer
• Optionally, by request, with Additional assistant Programs
• PC Locked Activation tool with the engineering access level

The Software EST v9.3 Comes As:

• CNH EST 9.3.0.0.0 installation file
• CNH EST 9.3.0.0.2 - 9.3.0.0.7 (EST9300Up5) updates
• Legacy Multilanguage Diagnostic Procedures installer
• Optionally, by request, with Additional assistant Programs
• PC Locked Activation tool with the engineering access level

What's New in the CNH EST v9.2 upd. 1 - 10

• EST_9200_Update_1_Details
• EST_9200_Update_2_Details
• EST_9200_Update_3_Details
• EST_9200_Update_4_Details
• EST_9200_Update_5_Details
• EST_9200_Update_6_Details
• EST_9200_Update_7_Details
• EST_9200_Update_8_Details
• EST_9200_Update_10_Details

Important Notice

Service Manuals and schemes are available only online. In case your PC/Laptop doesn't fit with the minimum hardware requirements, we can offer the CNH EST v9.0 (2019/01), which is still compatible with 32-bit Windows and 3/4 GB of RAM. Please indicate the desired application version in the comments field or via the Contact Us form.

CNH Group Brands Coverage

• New Holland (Agriculture and Construction)
• New Holland FK (Fiat-Kobelco)
• New Holland O&K (Orenstein & Koppel)
• CASE (Agriculture and Construction)
• STEYR
• Kobelco (since the 9.9 update, this brand is no longer included; if you need it, we can offer the 9.8 version instead)
• Iveco (Astra) (articulated dump trucks only)
• Flexi-Coil
• Sumitomo (S.H.I.)
• Link-Belt

The last version of CNH EST with technical documents is 7.6. If you need electrical schemes, please consider purchasing CNH EST 7.6 version on a virtual PC with Windows XP Works with any Windows platform.

CNH EST can be downloaded, or we can send it as a set of DVDs.

We recommend using our free remote assistance with the setup and activation process. If you have advanced Computer Skills, we can provide you with all the information for installation and activation.