Liebherr Diesel Engines D934 / D936 John Deere Service Manual

Service manual includes workshop service manuals, full repair and service manuals, special instructions for maintenance, technical service manuals, operator manuals, electrical circuits, fitting instructions, technical specifications, intended for serve diesel engines Liebheer D934 and D936.
Workshop service manual provides full technical repair information in PDF format. Software works on a personal computer running Windows and Mac, supports English language. Software provides search function in Acrobat, that help quickly find necessary information.
This Service Manual has a friendly and easy to use interface that supports English. Manual includes 179 pages. All pages are printable.

Contents:

• 1. Product description
  • 1.1. Illustration of engine 936L
  • 1.2. Technical description
  • 1.3. Special equipment for diesel engine
  • 1.4. Engine classification, engine identification plates, engine number
  • 1.5. Technical data, adjustment values and test values
  • 1.6. Tightening specifications
  • 1.7. Screw tightening values
• 2. Description of basic engine
  • 2.1. Engine
  • 2.2. Crankcase breather
• 3. Cylinder head
  • 3.1. Description of cylinder head
  • 3.2. Cylinder head and cylinder head gasket (diagram)
  • 3.3. Replacing the cylinder head gasket
  • 3.4. Carrying out a compression test
• 4. Lube oil circuit
  • 4.1. Lube oil circuit diagram
  • 4.2. Lube oil pump
  • 4.3. Oil filter
  • 4.4. Oil cooler
  • 4.5. Leakages in the oil cooler
  • 4.6. Oil sump
  • 4.7. Causes of oil pressure problems
  • 4.8. Fuel in thr oil
• 5. Water circuit
  • 5.1. Diagram of the water circuit
  • 5.2. Cooling water - thermostat
  • 5.3. Cooling water pump
  • 5.4. Dismantling the coolant water pump
  • 5.5. Cooling water in the fuel
• 6. Suction side
  • 6.1. Exhaust turbocharger
  • 6.3. Heater flange
• 7. Exhaust side
  • 7.1. iAGR
  • 7.2. eAGR
  • 7.3. Engine brake
  • 7.4. Description of the auxiliary brake system (ZBS)
• 8. Description of the electronic injection system
  • 8.2. Engine control unit with schematic connection
  • 8.3. Diagnostic description
  • 8.4. Diagnosis and service
  • 8.5. Connection diagram of the sensors
  • 8.6. Sensors
  • 8.7. Electrical system
  • 8.8 Configuration of pump-/nozzle units (PLD-ENGINES ONLY)
• 9. Description of the mechanical injection system
  • 9.1. Functional description
  • 9.2. Low-pressure circuit
  • 9.3. Checking the low-presure circuit
  • 9.4. Fuel pump ZP 18.5
  • 9.5. Fuel filtering
  • 9.6. Fuel lines
  • 9.7. Draining the upper fuel duct
  • 9.8. Draining the lower fuel duct
  • 9.9. Diagram of pump/nozzle unit with injection nozzle
  • 9.10. Installing and dismantling the pump element (UP 20) with roller tappet
  • 9.11. Bleeding the fuel system
  • 9.12. Diagram of the injection nozzle and pressure pipe tube
  • 9.13. Checking the injection nozzle
  • 9.14. Oil in the fuel system
• 10. Description of accessories
  • 10.1. Diagram of auxiliary drives
  • 10.2. Air compressor
  • 10.3. Drive for generator and air-conditioning compressor
  • 10.4. Checking the condition of the ribbed V-belt
• 11. Electrical system
  • 11.1. Starter
  • 11.2. Checking the starter
  • 11.3. Checking the alternator
  • 11.4. Heater flange
• 12. Maintenance
  • 12.1. Maintenance chart
  • 12.2. Setting the valves
  • 12.3. Setting the valves for the engine auxiliary brake system (ZBS)
• 13. Fuels
• 14. Mechanical fault list
• 15. Electronic fault list
• 16. Description of level - 1 Parameters and measuring points