Challenger MT525B-535B-545B-555B-565B-575B Series Agricultural Tractor Operator Instruction Book PDF

For proper operation and maintenance of Challenger Agricultural Tractors Series MT, you should purchase this Operator Instruction Book.
This manual contains detailed tractor identification information, safety instructions, operation and maintenance instructions, specifications, troubleshooting information for tractors Challenger series MT.
This instruction book comes in PDF format. We recommend to use Adobe PDF Reader, to be sure all images / graphics will display correctly. Working with this manual, you can easily copy, save, and print the information you need. If necessary, you can print pages, pictures, charts, or the entire manual completely.

Models covered:
MT525B,
MT535B,
MT545B,
MT555B,
MT565B,
MT575B.

CONTENTS:

• Chapter 1 - TRACTOR IDENTIFICATION
  • 1.1 - SERIAL NUMBERS
• Chapter 2 - INTRODUCTION - SAFETY INSTRUCTIONS AND WARRANTY
  • 2.1 - NOTE TO THE USER
  • 2.2 - THIS BOOK MUST ALWAYS BE KEPT WITH THE TRACTOR
  • 2.3 - WARRANTY
  • 2.4 - SAFETY
  • 2.5 - SAFETY - ALERT SYMBOLS AND TERMS
  • 2.6 - TRACTOR AND IMPLEMENTS
  • 2.7 - MAXIMUM TRAVEL SPEEDS
  • 2.8 - INTRODUCTION
  • 2.9 - NOTE TO THE OPERATOR
  • 2.10 - DANGER, WARNING AND CAUTION
  • 2.11 - DECALS
  • 2.12 - SAFETY PROCEDURE TO FOLLOW
  • 2.13 - PROTECTION
  • 2.14 - PREPARING FOR SAFE OPERATION
  • 2.15 - SERVICING THE TRACTOR
  • 2.16 - STARTING
  • 2.17 - WORKING SAFELY
  • 2.18 - SAFETY - AFTER OPERATION
  • 2.19 - DESCRIPTION OF DECALS
• Chapter 3 - INSTRUMENTS AND CONTROLS
  • 3.1 - INSTRUMENT PANEL (FIG. 1)
  • 3.2 - INDICATOR LIGHTS PANEL
  • 3.3 - CONTROL DISPLAY
  • 3.4 - DOT MATRIX SCREEN
  • 3.5 - PEDALS
  • 3.6 - RIGHT-HAND CONSOLE
  • 3.7 - LEFT-HAND CONSOLE
  • 3.8 - SEAT
  • 3.9 - STEERING WHEEL
  • 3.10 - UPPER CONSOLE
  • 3.11 - SUN VISOR
  • 3.12 - ROOF HATCH
  • 3.13 - BODY
• Chapter 4 - OPERATION
  • 4.1 - RUNNING IN
  • 4.2 - START-UP
  • 4.3 - STOPPING THE ENGINE
  • 4.4 - DRIVING THE TRACTOR
  • 4.5 - "TECHSTAR CVT" TRANSMISSION
  • 4.6 - TRACTOR TOWING
  • 4.7 - BRAKES
  • 4.8 - FRONT AXLE ENGAGEMENT (4WD)
  • 4.9 - DIFFERENTIAL LOCK
  • 4.10 - SUSPENDED CAB
  • 4.11 - FRONT PTO
  • 4.12 - REAR PTO
  • 4.13 - ELECTRONIC LINKAGE
  • 4.14 - STEERING
  • 4.15 - AUXILIARY HYDRAULICS SYSTEM
  • 4.16 - THREE-POINT LINKAGE
  • 4.17 - DRAWBARS AND HITCHES
  • 4.18 - TOWING PROCEDURES AND INSTRUCTIONS
• Chapter 5 - MAINTENANCE AND ADJUSTMENTS
  • 5.1 - INITIAL 50 HOUR SERVICE INSPECTION
  • 5.2 - SERVICE GUIDE
  • 5.3 - USER GUIDE
  • 5.4 - LUBRICATION
  • 5.5 - INSTRUCTIONS FOR PRESSURE WASHING
  • 5.6 - LUBRICATION
  • 5.7 - ENGINE
  • 5.8 - FUEL SYSTEM
  • 5.9 - AIR FILTER
  • 5.10 - COOLING SYSTEM
  • 5.11 - STEERING, TRANSMISSION AND AUXILIAIRY FUNCTIONS
  • 5.12 - FRONT AXLE - 4-WHEEL DRIVE
  • 5.13 - CLUTCH AND BRAKES
  • 5.14 - AIR CONDITIONING SYSTEM
  • 5.15 - CHECKING FAN BELT CONDITION AND TENSION
  • 5.16 - CAB
  • 5.17 - TYRES
  • 5.18 - WHEELS
  • 5.19 - TRACK ADJUSTMENTS
  • 5.20 - ELECTRICAL EQUIPMENT
  • 5.21 - REPLACING FUSES
  • 5.22 - FUEL HANDLING, STORAGE AND SPECIFICATION
  • 5.23 - STORING THE TRACTOR
• Chapter 6 - SPECIFICATIONS
  • 6.1 - ENGINE
  • 6.2 - GROUND SPEEDS
  • 6.3 - ELECTRICAL SYSTEM
  • 6.4 - COOLING
  • 6.5 - TRANSMISSION
  • 6.6 - FINAL DRIVE UNITS
  • 6.7 - REAR PTO
  • 6.8 - FOUR-WHEEL DRIVE FRONT AXLE
  • 6.9 - HYDRAULICS (ACCORDING TO MODEL OR COUNTRY)
  • 6.10 - LINKAGE
  • 6.11 - BRAKES
  • 6.12 - DIFFERENTIAL LOCK - REAR AXLE
  • 6.13 - STEERING
  • 6.14 - WHEELS
  • 6.15 - TYRES
  • 6.16 - INFLATION PRESSURE
  • 6.17 - TRACK WIDTH ADJUSTMENTS
  • 6.18 - NOISE LEVELS (DBA) AT OPERATOR EARS
  • 6.19 - CAPACITIES
  • 6.20 - TIGHTENING TORQUES
  • 6.21 - DIMENSIONS AND WEIGHTS
  • 6.22 - DIMENSIONS AND ATTACHMENT POINTS
  • 6.23 - DIMENSIONS AND ATTACHMENT POINTS
• Chapter 7 - ACCESSORIES AND OPTIONS
  • 7.1 - ACCESSORIES AND OPTIONS
  • 7.2 - "DATATRONIC" ONBOARD COMPUTER
  • 7.3 - REAR DUAL CONTROL
  • 7.4 - GLOSSARY
  • 7.5 - FRONT DUAL CONTROL
  • 7.6 - TRAILED IMPLEMENT CONTROL (TIC)
  • 7.7 - "DATATRONIC 3" ONBOARD COMPUTER
  • 7.8 - MEMORIES APPLICATION
  • 7.9 - WORK APPLICATION
  • 7.10 - SETTINGS APPLICATION
  • 7.11 - HEADLAND APPLICATION
  • 7.12 - EHS VALVES APPLICATION
  • 7.13 - DUAL CONTROL APPLICATION
  • 7.14 - TRAILED IMPLEMENT CONTROL (T. I. C.)
  • 7.15 - FRONT LINKAGE
  • 7.16 - FRONT POWER TAKE-OFF
• Chapter 8 - TROUBLESHOOTING
  • 8.1 - ENGINE TROUBLESHOOTING
  • 8.2 - HYDRAULIC CIRCUIT TROUBLESHOOTING
• Appendix - CONVERSION TABLES
• Index

Tractors Challenger Series MT provide the operator with exceptional handling. The combination of proven performance in practice continuously variable transmission and the simplicity of its management allows you to enjoy working with the machine.
Whatever the task set, tractors Challenger Series MT can be equipped with all the necessary options to accomplish it with the highest performance.
The combination of proven performance in practice continuously variable transmission and the simplicity of its management allows you to enjoy working with the machine.