Bomag BW 145 DH-3 & BW 145 PDH-3 Single Drum Roller Instructions for Repair PDF

Electronic manual contains information regarding repair procedures, maintenance instructions, repair manuals, calibration data for single drum rollers Bomag. This manual allows you to save time searching for the necessary repair information, installation manuals, instructions for maintenance and repair.

Manual is a detailed source of important information for anyone with rollers Bomag, which itself wants to improve the maintenance and repair.

This manual comes in PDF format. To view the information you must have any PDF Reader. Working with this manual, you can easily copy, save, and print the information you need. If necessary, you can print pages, pictures, charts, or the entire manual completely.

Models:
BW 145 DH-3
BW 145 PDH-3

Serial numbers:
S/N 901581481003 >
S/N 901581491016 >

Contents:
1. General
   1.1 Foreword  
   1.2 Safety regulations
   1.3 General repair instructions
   1.4 Tightening torques
   1.5 Connection overview
2. Tests and adjustments
   2.1 Technical data
   2.2 Special tools
   2.3 Checking the rotation speeds
   2.4 Checking / adjusting the neutral positions of the travel pumps
   2.5 Pressure tests in the travel circuit
   2.6 Check the setting of the high-pressure relief valves in the travel circuit
   2.7 Checking / adjusting the vibrator shaft speeds
   2.8 Pressure measurements in the vibration circuit
   2.9 Check the leakage rate of the vibration motor
   2.10 Pressure test in steering circuit
3. Flushing
   3.1 Special tool
   3.2 Flushing schematic for drum drive
   3.3 Flushing schematic for axle drive
   3.4 Flushing the travel circuit
   3.5 Flushing schematic for vibration drive
   3.6 Flushing the vibration circuit
4. Troubleshooting
   4.1 General
   4.2 Troubleshooting diagram
5. Drum
   5.1 Special tools
   5.2 Repair overview for drum
   5.3 Removing and installing the drum
   5.4 Repairing the drum
   5.5 Dismantling, assembling the change-over weights
   5.6 Changing the rubber buffers
6. Oscillating articulated joint
   6.1 Special tools
   6.2 Repair overview oscillating articulated joint
   6.3 Removing and installing the oscillating articulated joint
   6.4 Repairing the oscillating articulated joint
7. Suppliers documentation
   7.1 A10VG
   7.2 MS/MSE 02 to 18
   7.3 A10VM
   7.4 Vibration motors MMF 025
   7.5 Axle DANA 172